Full length die sets are for bottleneck rifle and pistol cases, and they include a full length sizing die and a seater die. The full length die will bump the shoulder of the case to extent the die is adjusted up or down in the press. We suggest using a cartridge headspace gage tool to get the correct shoulder bump. The full length die also sizes the body of the case so it will chamber easily for the next firing, then the die decaps the spent primer. The expander ball passes through the neck of the case and sizes the neck to the correct tension. Cases must be lubricated before full length sizing. The RCBS seater dies for bottleneck cases will seat bullets correctly in full length sized cases or neck sized cases. These seater dies have a built-in crimp ring to enable you to crimp the case into the bullet if you wish to. The seater die is easily adjusted to crimp or not to crimp by raising or lowering the die position in the press. Full length 2 die sets are the basic building block of the reloading process. Many shooters wear out multiple barrels or rifles using just one full length reloading die set. We recommend that new reloaders start with a full length die set and learn how to set the dies up correctly before they jump in to other types of reloading dies.
Täydellinen ratkaisu patruunoiden lataamiseen
FULL LENGTH DIE SETS, FULL LENGTH 2-DIE SET 8X57MM MAUSER on suunniteltu bottleneck-tyyppisille kiväärin ja pistoolin patruunoille. Tämä setti sisältää täydellisen koon säätötyökalun ja istutustyökalun.
Tuotteen kuvaus
Täydellinen koko -työkalu säätää patruunan olkapäätä, kun työkalua säädetään ylös tai alas puristimessa. Suosittelemme käyttämään patruunan headspace -mittatyökalua oikean olkapään bumpin saavuttamiseksi.
Täydellinen koko -työkalu myös koossa patruunan runkoa, jotta se mahtuu helposti seuraavaan laukaisuun, ja työkalu poistaa käytetyn sytyttimen. Laajennuspallo kulkee patruunan kaulan läpi ja säätää kaulan oikeaan jännitykseen.
- Patruunoiden tulee olla voideltuja ennen täydellistä koon säätöä.
- RCBS:n istutus työkalut bottleneck-patruunoille istuttavat luodit oikein täydellisesti koossa säädetyissä tai kaula koossa säädetyissä patruunoissa.
- Nämä istutus työkalut sisältävät sisäänrakennetun puristusrenkaan, jonka avulla voit puristaa patruunan luotiin halutessasi.
- Istutus työkalua on helppo säätää puristamaan tai ei puristamaan nostamalla tai laskemalla työkalun sijaintia puristimessa.
Täydelliset 2-die setit ovat latausprosessin perusrakennuspalikka. Monet ampujat kuluttavat useita piippuja tai kivääreitä käyttäen vain yhtä täydellistä lataustyökalusettiä. Suosittelemme, että uudet lataajat aloittavat täydellisellä koko -työkalusetillä ja oppivat asettamaan työkalut oikein ennen kuin siirtyvät muihin lataustyökaluihin.