Full length die sets are for bottleneck rifle and pistol cases, and they include a full length sizing die and a seater die. The full length die will bump the shoulder of the case to extent the die is adjusted up or down in the press. We suggest using a cartridge headspace gage tool to get the correct shoulder bump. The full length die also sizes the body of the case so it will chamber easily for the next firing, then the die decaps the spent primer. The expander ball passes through the neck of the case and sizes the neck to the correct tension. Cases must be lubricated before full length sizing. The RCBS seater dies for bottleneck cases will seat bullets correctly in full length sized cases or neck sized cases. These seater dies have a built-in crimp ring to enable you to crimp the case into the bullet if you wish to. The seater die is easily adjusted to crimp or not to crimp by raising or lowering the die position in the press. Full length 2 die sets are the basic building block of the reloading process. Many shooters wear out multiple barrels or rifles using just one full length reloading die set. We recommend that new reloaders start with a full length die set and learn how to set the dies up correctly before they jump in to other types of reloading dies.
Kattava ratkaisu patruunoiden lataamiseen
FULL LENGTH DIE SETS, FULL LENGTH 2-DIE SET 308 WIN -valmistaja: RCBS tarjoaa täydellisen ratkaisun bottleneck-tyyppisten kiväärin ja pistoolin patruunoiden lataamiseen. Tämä setti sisältää:
- Full length sizing die: Tämä die säätää patruunan olkapään korkeutta, jolloin se voidaan säätää ylös tai alas puristuksessa.
- Seater die: Tämä die istuttaa luodit oikein täysimittaisiksi ladatuissa tai kaulaa säädetyissä patruunoissa.
Suosittelemme käyttämään patruunan headspace-mittausvälinettä oikean olkapään noston saavuttamiseksi. Full length die myös kokoaa patruunan rungon, jotta se mahtuu helposti seuraavaan laukaukseen, ja die poistaa käytetyn sytyttimen. Laajennuskuula kulkee patruunan kaulan läpi ja säätelee kaulan oikeaan jännitykseen.
Ennen täysimittaista kokoamista patruunat on voideltava. RCBS:n seater-die on varustettu sisäänrakennetulla puristusrengalla, joka mahdollistaa patruunan puristamisen luotiin, jos niin halutaan. Seater-die on helppo säätää puristamaan tai ei puristamaan nostamalla tai laskemalla die-asentoa puristuksessa.
Täysimittaiset 2-die-setit ovat latausprosessin perusrakennuspalikka. Monet ampujat kuluttavat useita piippuja tai kiväreitä käyttäen vain yhtä täysimittaista latausdieseettiä. Suosittelemme, että uudet lataajat aloittavat täysimittaisella die-setillä ja oppivat säätämään diesit oikein ennen kuin siirtyvät muihin latausdieseihin.