Full length die sets are for bottleneck rifle and pistol cases, and they include a full length sizing die and a seater die. The full length die will bump the shoulder of the case to extent the die is adjusted up or down in the press. We suggest using a cartridge headspace gage tool to get the correct shoulder bump. The full length die also sizes the body of the case so it will chamber easily for the next firing, then the die decaps the spent primer. The expander ball passes through the neck of the case and sizes the neck to the correct tension. Cases must be lubricated before full length sizing. The RCBS seater dies for bottleneck cases will seat bullets correctly in full length sized cases or neck sized cases. These seater dies have a built-in crimp ring to enable you to crimp the case into the bullet if you wish to. The seater die is easily adjusted to crimp or not to crimp by raising or lowering the die position in the press. Full length 2 die sets are the basic building block of the reloading process. Many shooters wear out multiple barrels or rifles using just one full length reloading die set. We recommend that new reloaders start with a full length die set and learn how to set the dies up correctly before they jump in to other types of reloading dies.
Täydellinen ratkaisu tarkkuusammuntaan
FULL LENGTH DIE SETS, FULL LENGTH 2-DIE SET 6.5X55MM SWEDISH - RCBS tarjoaa täydellisen ratkaisun patruunoiden lataamiseen. Nämä täyspitkät die-setit ovat suunniteltu pullonmuotoisille kivääri- ja pistoolipatruunoille ja sisältävät täyspitkän koon die:n sekä istutusdie:n.
Ominaisuudet:
- Täyspitkä die säätää patruunan olkapään korkeutta, kun die:ä säädetään ylös tai alas.
- Suosittelemme käyttämään patruunan headspace-mittausvälinettä oikean olkapään korkeuden saavuttamiseksi.
- Die muotoilee myös patruunan rungon, jotta se mahtuu helposti seuraavaan laukaukseen.
- Die poistaa käytetyn sytyttimen.
- Laajennuspallo kulkee patruunan kaulan läpi ja muotoilee sen oikeaan jännitykseen.
- Patruunat on voideltava ennen täyspitkää muotoilua.
- RCBS:n istutusdieset pullonmuotoisille patruunoille istuttavat kuulia oikein täyspitkissä tai kaulan muotoilluissa patruunoissa.
- Istutusdie:ssa on sisäänrakennettu puristusrengas, joka mahdollistaa patruunan puristamisen kuulan ympärille haluttaessa.
- Istutusdie on helposti säädettävissä puristamaan tai ei puristamaan muuttamalla die:n asentoa.
Täyspitkät 2-die-setit ovat latausprosessin peruspilari. Monet ampujat kuluttavat useita piippuja tai kivääreitä käyttäen vain yhtä täyspitkää latausdie-settiä. Suosittelemme, että uudet lataajat aloittavat täyspitkällä die-setillä ja oppivat säättämään dieset oikein ennen kuin siirtyvät muihin latausdieseihin.