Full length die sets are for bottleneck rifle and pistol cases, and they include a full length sizing die and a seater die. The full length die will bump the shoulder of the case to extent the die is adjusted up or down in the press. We suggest using a cartridge headspace gage tool to get the correct shoulder bump. The full length die also sizes the body of the case so it will chamber easily for the next firing, then the die decaps the spent primer. The expander ball passes through the neck of the case and sizes the neck to the correct tension. Cases must be lubricated before full length sizing. The RCBS seater dies for bottleneck cases will seat bullets correctly in full length sized cases or neck sized cases. These seater dies have a built-in crimp ring to enable you to crimp the case into the bullet if you wish to. The seater die is easily adjusted to crimp or not to crimp by raising or lowering the die position in the press. Full length 2 die sets are the basic building block of the reloading process. Many shooters wear out multiple barrels or rifles using just one full length reloading die set. We recommend that new reloaders start with a full length die set and learn how to set the dies up correctly before they jump in to other types of reloading dies.
Täydellinen pituus -kiväärin ja pistoolin patruunadiesetti
RCBS:n täydellisen pituuden die-setit ovat suunniteltu pullonkaulakiväärin ja pistoolin patruunoille. Setti sisältää täydellisen pituuden koon die:n ja istutustyökalun.
Tuotteen kuvaus
Täydellinen pituuden die säätää patruunan olkaa, kun die:tä säädetään ylös tai alas puristimessa. Suosittelemme käyttämään patruunan headspace-mittatyökalua oikean olkan noston saavuttamiseksi. Täydellinen pituuden die myös koon patruunan runkoa, jotta se mahtuu helposti seuraavaan laukaukseen, ja die poistaa käytetyn sytyttimen.
Laajennuspallo kulkee patruunan kaulan läpi ja koon kaulan oikeaan jännitykseen. Patruunoiden tulee olla voideltuja ennen täydellistä pituuden koon säätämistä. RCBS:n istutustyökalut pullonkaulapatruunoille istuttavat kuulia oikein täydellisesti säädettyihin tai kaulan säädettyihin patruunoihin.
Nämä istutustyökalut sisältävät sisäänrakennetun puristusrenkaan, joka mahdollistaa patruunan puristamisen kuulan ympärille, jos niin halutaan. Istutustyökalua on helppo säätää puristamaan tai ei puristamaan nostamalla tai laskemalla die:n asemaa puristimessa.
Perustyökalu latausprosessissa
Täydellinen pituuden 2-diesetti on latausprosessin perusrakenne. Monet ammuntaharrastajat kuluttavat useita piippuja tai kivääreitä käyttäen vain yhtä täydellistä pituuden latausdie-settiä. Suosittelemme, että uudet lataajat aloittavat täydellisellä pituuden die-setillä ja oppivat säätämään die:t oikein ennen kuin siirtyvät muihin lataustyökaluihin.