Full length die sets are for bottleneck rifle and pistol cases, and they include a full length sizing die and a seater die. The full length die will bump the shoulder of the case to extent the die is adjusted up or down in the press. We suggest using a cartridge headspace gage tool to get the correct shoulder bump. The full length die also sizes the body of the case so it will chamber easily for the next firing, then the die decaps the spent primer. The expander ball passes through the neck of the case and sizes the neck to the correct tension. Cases must be lubricated before full length sizing. The RCBS seater dies for bottleneck cases will seat bullets correctly in full length sized cases or neck sized cases. These seater dies have a built-in crimp ring to enable you to crimp the case into the bullet if you wish to. The seater die is easily adjusted to crimp or not to crimp by raising or lowering the die position in the press. Full length 2 die sets are the basic building block of the reloading process. Many shooters wear out multiple barrels or rifles using just one full length reloading die set. We recommend that new reloaders start with a full length die set and learn how to set the dies up correctly before they jump in to other types of reloading dies.
Kattava ratkaisu patruunoiden lataamiseen
FULL LENGTH DIE SETS, FULL LENGTH 2-DIE SET 300 WIN MAG -sarja on täydellinen valinta kaikille, jotka lataavat bottleneck-tyyppisiä kiväärin ja pistoolin patruunoita. Tämä setti sisältää:
- Koko pituuden koon säätötyökalu: Tämä työkalu säätää patruunan olkapään korkeutta, jolloin voit säätää työkalua ylös tai alas puristimessa.
- Istutustyökalu: Tämä työkalu istuttaa kuulia oikein koko pituuden koon säätämisessä tai kaulan koon säätämisessä.
- Puristusrengas: Sisäänrakennettu puristusrengas mahdollistaa patruunan puristamisen kuulan ympärille, jos niin haluat.
On suositeltavaa käyttää patruunan headspace-mittausvälinettä oikean olkapään noston saavuttamiseksi. Koko pituuden koon säätötyökalu myös koon säätää patruunan rungon, jotta se mahtuu helposti seuraavaan laukaukseen. Tämän jälkeen työkalu poistaa käytetyn sytyttimen.
Muista voidella patruunat ennen koko pituuden koon säätämistä!
RCBS:n istutustyökalut bottleneck-patruunoille istuttavat kuulia oikein ja tarjoavat käyttäjälle mahdollisuuden säätää puristamista nostamalla tai laskemalla työkalun sijaintia puristimessa. Koko pituuden 2-die setit ovat latausprosessin perusta. Monet ampujat kuluttavat useita piippuja tai kivääreitä käyttäen vain yhtä koko pituuden lataustyökalusarjaa.
Suosittelemme, että uudet lataajat aloittavat koko pituuden työkalu setistä ja oppivat säätämään työkalut oikein ennen kuin siirtyvät muihin lataustyökaluihin.