Full length die sets are for bottleneck rifle and pistol cases, and they include a full length sizing die and a seater die. The full length die will bump the shoulder of the case to extent the die is adjusted up or down in the press. We suggest using a cartridge headspace gage tool to get the correct shoulder bump. The full length die also sizes the body of the case so it will chamber easily for the next firing, then the die decaps the spent primer. The expander ball passes through the neck of the case and sizes the neck to the correct tension. Cases must be lubricated before full length sizing. The RCBS seater dies for bottleneck cases will seat bullets correctly in full length sized cases or neck sized cases. These seater dies have a built-in crimp ring to enable you to crimp the case into the bullet if you wish to. The seater die is easily adjusted to crimp or not to crimp by raising or lowering the die position in the press. Full length 2 die sets are the basic building block of the reloading process. Many shooters wear out multiple barrels or rifles using just one full length reloading die set. We recommend that new reloaders start with a full length die set and learn how to set the dies up correctly before they jump in to other types of reloading dies.
Täydellinen pituus -kiväärin ja pistoolin patruunatynnyrien setti
RCBS:n täydellisen pituuden die-setit ovat suunniteltu pullonmuotoisille kiväärin ja pistoolin patruunoille. Setti sisältää täydellisen pituuden koon ja istutus-die:n.
Tuotteen kuvaus
Täydellinen pituus -die säätää patruunan olkapään niin, että se nousee tai laskee prässin säädön mukaan. Suosittelemme käyttämään patruunan päätilan mittaustyökalua oikean olkapään bumpin saavuttamiseksi. Täydellinen pituus -die myös koon patruunan runkoa, jotta se mahtuu helposti seuraavaan laukaisuun, ja die poistaa käytetyn sytyttimen.
Laajennuspallo kulkee patruunan kaulan läpi ja koon kaulan oikeaan jännitykseen. Patruunat on voideltava ennen täydellistä pituuden koon säätöä.
- RCBS:n istutus-diet pullonmuotoisille patruunoille istuttavat luodit oikein täydellisesti koottuihin tai kaulan koottuihin patruunoihin.
- Nämä istutus-diet sisältävät sisäänrakennetun puristusrenkaan, jonka avulla voit puristaa patruunan luotiin, jos haluat.
- Istutus-dieta on helppo säätää puristamaan tai ei puristamaan nostamalla tai laskemalla die:n sijaintia prässissä.
Täydellinen pituuden 2-die-setti on perusta uudelleen latausprosessille. Monet ampujat kuluttavat useita piippuja tai kivääreitä käyttäen vain yhtä täydellistä pituuden uudelleen latausdie-settiä. Suosittelemme, että uudet uudelleen lataajat aloittavat täydellisellä pituuden die-setillä ja oppivat säätämään diet oikein ennen kuin siirtyvät muihin uudelleen latausdie-tyyppeihin.