Ominaisuudet
- Asetyyppi:
Savage Arms
- Malli:
Universal Rifles
- Toimituksen paino: 0,136kg
- Toimituksen korkeus: 18mm
- Toimituksen leveys: 74mm
- Toimituksen pituus: 198mm
- UPC: 050806008250
Tuotenro: 080097005
050806008250 Jousikuormitteinen työkalu antaa jatkuvaa, suoraa painetta pitääkseen bolt lugsit suorina vastaanottimen vasten lappaamisen aikana käyttäen 600-800 hiontapaperia, silikonikarbidia. Tarjoaa parempia tuloksia kuin pelkkä sormipaine. Vaihdettavat kierteiset sleeve -osat sopivat alla lueteltuihin suosittuihin toimintoihin.Toimitusaika noin 2-4 viikkoa.
BOLT LAPPING TOOLS, 2-PIECE BOLT LAPPING KIT FOR SAVAGE LARGE on erinomainen työkalu, joka tarjoaa jatkuvaa ja suoraa painetta lukon lukoille, pitäen ne suorassa vastaanottajaa vasten hiottaessa 600-800 karkeudella silikonikarbidihiontapaperilla. Tämä työkalu tuottaa parempia tuloksia kuin pelkkä sormipaine.
M14/M1A Set -sleeve sisältää suuren halkaisijan työnnön ja erityisen hiomakahvan, joka on tarpeen näille malleille. Mauser Large -sleeve sopii suurirenkaisiin Mauser-toimintoihin, kun taas Mauser Small -sleeve sopii pienirenkaisiin Mauser-toimintoihin. Savage Small -sleeve sopii Savage-toimintoihin kaikilla kaliipereilla, paitsi Rem Ultra Mag (RUM), Rem SA Ultra Mag (RSUM) ja Win Short Mag (WSM). Savage Large -sleeve sopii vain RUM, RSUM ja WSM kaliipereihin.
Yksi Gun Set sisältää bolt tool bodyn, työnnön ja oikeankokoisen sleeve:n luetellulle mallille. M14/M1A One Gun Set sisältää bolt tool bodyn, suuren halkaisijan työnnön, oikeankokoisen sleeve:n ja erityisen sleeve:n sekä erityisen bolt lapping toolin, joka on ainutlaatuinen M14/M1A/M1 Garand -malleille. Setti sisältää kaikki työkalut, joita tarvitaan kaikkien taulukossa lueteltujen mallien hiomiseen.
* Erikoishinta, katso alla.
Savage Arms
Universal Rifles
Very nice fit of parts. 31.8.2015
I bought this one-gun kit after trying to use the plunger body from the M14/M1/M1A kit. It did not fit a sleeve I had bought for the Large Ring Mauser. After receiving this kit with it's plunger body I then began trying all the parts one at a time.
Both plunger bodies are 0.5620" and the sleeves are 0.5625 except the M14, it was 0.563. There were little burrs on the plunger body of the M14 kit that made me think it would not fit the different sleeves. All fit well after a little lapping.
I plan on using the bolt lug lapping tool for several rifles I am building. After using the tool I believe I can use it to square the bolt face on a Mauser Large Ring VZ-24. After reaming the sleeve from existing 9/16" to a 5/8" I will press fit a drill bushing that is 5/8 x 3/8 and use the Mason Reamer Burr which has a 3/8" shaft. The Burr has been ground to 0.3740 to 0.3745. It has a buttery slip fit in the Drill Bushing.
Mauser threads are at a 55 deg pitch and not easy to find. Brownells sells the sleeve with the right threads for the '98 and the face truing Burrs. All you need is the drill bushing, the undersized drill, and the reamer to make the altered sleeve to be able to Lapp the lugs with the original unaltered sleeve, and true the face of your bolt with your altered sleeve. After, of course, you check that the receivers threads are true to the action. This can be checked with a mandrel which Brownells has too. This can be done for any rifle that Brownells has a sleeve for. Happy Gunsmithing, JL.
Kohdattiin virhe tämän sisällön lataamisessa. Päivitä sivu jatkaaksesi. Jos ongelma jatkuu, ota yhteyttä asiakaspalveluumme.