Ominaisuudet
- Asetyyppi:
Mauser
- Malli:
Universal Rifles
- Toimituksen paino: 0,113kg
- Toimituksen korkeus: 18mm
- Toimituksen leveys: 74mm
- Toimituksen pituus: 226mm
- UPC: 050806008359
Tuotenro: 080097198
050806008359 Jousikuormitteinen työkalu antaa jatkuvaa, suoraa painetta pitääkseen bolt lugsit suorina vastaanottimen vasten lappaamisen aikana käyttäen 600-800 hiontapaperia, silikonikarbidia. Tarjoaa parempia tuloksia kuin pelkkä sormipaine. Vaihdettavat kierteiset sleeve -osat sopivat alla lueteltuihin suosittuihin toimintoihin.Toimitusaika noin 2-4 viikkoa.
BOLT LAPPING TOOLS, 2-PIECE BOLT LAPPING KIT FOR MAUSER LARGE on täydellinen valinta kaikille, jotka haluavat parantaa lukkopulttien istuvuutta. Tämä työkalu on suunniteltu erityisesti Mauser-aseille ja tarjoaa erinomaisia tuloksia.
Jousikuormitteinen työkalu antaa jatkuvan, suoran paineen, joka pitää pultin lukkokohdat suorina vastaanottimessa hiottaessa 600–800 karkeudella, silikonikarbidihiomakivellä. Tämä menetelmä tuottaa parempia tuloksia kuin pelkkä sormipaine. Vaihdettavat kierreholkit sopivat suosittuihin aseisiin, jotka on lueteltu alla.
M14/M1A Set -holkki sisältää suuren halkaisijan työntäjän ja erityisen hiomakahvan, joita tarvitaan näille malleille. Mauser Large -holkki sopii suurirenkaisille Mauser-toimille, kun taas Mauser Small -holkki sopii pienirenkaisille Mauser-toimille. Savage Small -holkki sopii Savage-toimille kaikissa kaliipereissa lukuun ottamatta Rem Ultra Mag (RUM), Rem SA Ultra Mag (RSUM) ja Win Short Mag (WSM). Savage Large -holkki sopii Savage-toimille vain RUM-, RSUM- ja WSM-kaliipereissa.
Yksi Gun Set sisältää pulttityökalun rungon, työntäjän ja oikean kokoisen holkin luetellulle mallille. M14/M1A One Gun Set sisältää pulttityökalun rungon, suuren halkaisijan työntäjän, oikean kokoisen holkin, erityisen holkin ja erityisen pultin hiomatyökalun, joka on ainutlaatuinen vain M14/M1A/M1 Garand -malleille. Kit sisältää kaikki työkalut, joita tarvitaan kaikkien taulukossa lueteltujen mallien hiomiseen.
*Erityinen hinta, katso alla.
Mauser
Universal Rifles
Very nice fit of parts. 31.8.2015
I bought this one-gun kit after trying to use the plunger body from the M14/M1/M1A kit. It did not fit a sleeve I had bought for the Large Ring Mauser. After receiving this kit with it's plunger body I then began trying all the parts one at a time.
Both plunger bodies are 0.5620" and the sleeves are 0.5625 except the M14, it was 0.563. There were little burrs on the plunger body of the M14 kit that made me think it would not fit the different sleeves. All fit well after a little lapping.
I plan on using the bolt lug lapping tool for several rifles I am building. After using the tool I believe I can use it to square the bolt face on a Mauser Large Ring VZ-24. After reaming the sleeve from existing 9/16" to a 5/8" I will press fit a drill bushing that is 5/8 x 3/8 and use the Mason Reamer Burr which has a 3/8" shaft. The Burr has been ground to 0.3740 to 0.3745. It has a buttery slip fit in the Drill Bushing.
Mauser threads are at a 55 deg pitch and not easy to find. Brownells sells the sleeve with the right threads for the '98 and the face truing Burrs. All you need is the drill bushing, the undersized drill, and the reamer to make the altered sleeve to be able to Lapp the lugs with the original unaltered sleeve, and true the face of your bolt with your altered sleeve. After, of course, you check that the receivers threads are true to the action. This can be checked with a mandrel which Brownells has too. This can be done for any rifle that Brownells has a sleeve for. Happy Gunsmithing, JL.
Kohdattiin virhe tämän sisällön lataamisessa. Päivitä sivu jatkaaksesi. Jos ongelma jatkuu, ota yhteyttä asiakaspalveluumme.