Brownells Finland - Laajin valikoima aseen osia, lippaita, ammuntatarvikkeita, asesepän työkaluja ja optiikkaa Suomi
076683372147 749014041
Trim the case once—never trim again! The X-Sizer Die looks like a regular Full Length Sizer Die. Inside, the die features a specially designed mandrel with an expander ball and decapping pin attached. The mandrel is what the X-Die® is all about. The patented X-Sizer Die eliminates the need for repeated trimming after an initial trim of .020” off the maximum case length to standardize the case. The X-Die doesn’t shorten the length of the case: the mandrel reduces the growth rate as the case grows as a result of the case mouth-contacting the mandrel during sizing. Because of an extremely close tolerance between the mandrel and die neck wall, the neck wall of the case does not thicken as the case length is pushed back. Cases repeatedly sized in the X-Die will initially grow a few thousandths of an inch, then stabilize below the maximum case length with no discernable loss of accuracy or case life.
25.9 25.9 1 EUR
Tuotenro: 749014041
RCBS X-DIE MANDREL ASSEMBLY .223 REM
Valmistajan tuotenumero: 37214 076683372147 Leikkaa hylsy kerran – eikä sitä tarvitse enää leikata! X-Sizer Die näyttää tavalliselta Full Length Sizer Die -työkalulta. Sisällä työkalussa on erityisesti suunniteltu matriisi, jossa on laajennuspallo ja nallinpoistotappi kiinnitettynä. Matriisi on se, mistä X-Die® on tehty. Patentoitu X-Sizer Die poistaa tarpeen toistuvalle hylsyn leikkaamiselle alkuperäisen .020 tuuman leikkauksen jälkeen maksimaalisesta hylsyn pituudesta standardoidakseen hylsyn. X-Die ei lyhennä hylsyn pituutta: matriisi vähentää hylsyn kasvunopeutta, kun hylsy kasvaa hylsyn suun koskettaessa matriisia kokoonpuristuksen aikana. Erittäin tarkan toleranssin ansiosta matriisin ja die-kaulan seinämän välillä, hylsyn kaulan seinämä ei paksune hylsyn pituuden työntämisen yhteydessä. Toistuvasti X-Diessä koonnutut hylsyt kasvavat aluksi muutamia tuhannesosia tuumasta, sitten stabiloituvat alle maksimaalisen hylsyn pituuden ilman havaittavaa tarkkuuden tai hylsyn käyttöiän menetystä.
25.9 EUR 6 25,90 € *
Toimitusaika noin 2-4 viikkoa.
6 kpl. USA:n varastossa
Ominaisuudet: Patruuna: 223 Remington

Ominaisuudet

Patruuna: 223 Remington Toimituksen paino: 0,041kg Toimituksen korkeus: 19mm Toimituksen leveys: 51mm Toimituksen pituus: 102mm

Tuotekuvaus

Made in USA



Trim the case once—never trim again! The X-Sizer Die looks like a regular Full Length Sizer Die. Inside, the die features a specially designed mandrel with an expander ball and decapping pin attached. The mandrel is what the X-Die® is all about. The patented X-Sizer Die eliminates the need for repeated trimming after an initial trim of .020” off the maximum case length to standardize the case. The X-Die doesn’t shorten the length of the case: the mandrel reduces the growth rate as the case grows as a result of the case mouth-contacting the mandrel during sizing. Because of an extremely close tolerance between the mandrel and die neck wall, the neck wall of the case does not thicken as the case length is pushed back. Cases repeatedly sized in the X-Die will initially grow a few thousandths of an inch, then stabilize below the maximum case length with no discernable loss of accuracy or case life.
Uutiskirje