Korisi on tyhjä.

Ostoskori

09-5122933

Tilaa uutiskirje

L.E. WILSON, INC.
WILSON CASE GAGE

749003862

Kuvaus
Arviot (14)

The most important use of a cartridge case gage is for setting up 7⁄8"-14 press type full length resizing dies. A common error in reloading is to oversize your brass. Headspace of fired cases can quickly and accurately be measured using this tool and a caliper. Regular Style: This one piece gage will check overall length to indicate a need for trimming and datum to head length to assure correct headspace to prevent over sizing. Adjustable Style: For belted mags. While the belt provides support for proper headspace, the life of the case will drastically shorten unless resizing is held to a minimum at the shoulder. SPECIAL ORDER CASE GAGES ARE AVAILABLE---MEASURE CASE LENGTH ONLY

Lisää...

Asiakasarviot: L.E. WILSON, INC. 7.62X39MM CASE GAGE

Arvioiden lukumäärä: 14
Arvostelut brownells.com sivustolla: 14
Arvioiden keskiarvo: 4,9

Great Product !!! (4.4.2014)

All products I purchase are top quality and the best no Hassel Warranty.

Some of the best money... (26.2.2011)

I've ever spent. I had several thousand cases to resize after I discover they do not fit in my AR-15. This little doo-dad tells me instantly with just a glance if I have set my dies to the correct location. Also indicates if case has been sized or not. To use, size your case and insert into comparator. If the head or the mouth sticks out, the case is too long. If the case fits flush to the inside/lower cuts, it WILL fit into ANY rifle for which it is chambered. A great tool. I'm glad I bought mine and I use it with regularity.

Well Made (31.3.2011)

Easy to use, well made and accurate.

How Did I Get Along Without It? (9.9.2012)

I used this gauge to set up my resizing die rather than the "touch and back off" method. I didn't realize how far off I was and careful case prep improved my groups.

223/5.56 Need This Tool! (21.1.2013)

If you are a beginner loading 223/5.56 Ammo this is a must have tool! This tool helps with setting up your bullet setting die so you do not over crimp & end up with FTF!!

absoutely essential for checking loaded (6.1.2014)

The perfect tool for checking your reloads to be sure they won't cause a jam. I fought for years with reloading my AR15 until I purchased this Wilson gauge. I drop every reloaded round into this gauge to be sure it is not oversize. There is just to much inconsistency in brass, so now I can rely on my reloads to feed and fire just like factory stuff.

easy, simple,accurate (27.3.2011)

reloading is easier and more accurate with the right tools

Excellent product (27.3.2013)

Ordered on Monday, arrived on Wednesday. Easy to use and extremly accurate.

Best gauge to ensure saftey (2.9.2012)

The Wilson Case Gauge, in any caliber, allows the individual to have the confidence and assurance that the prepped cases completed for reloading are within spec and will chamber correctly and safely. A must have for any reloader.

Worth every penny (3.4.2017)

I've reloaded for years but never used Wilson products. Setting up for a custom build 22-250, I wanted accurate cartridge headspace measurements and thought I'd try them although there are less expensive versions. This gage is superb tool room quality. You can use it as a go/no-go or using a depth mic measure the deviation from the reference and flip it over and you get case length. Note that they are in the "white" with no surface finish so you must keep them lubricated like precision cutting tools.

Incorrect Size Marking. (23.4.2012)

This gauge is excellent for determining whether case is within tolerance for head space and case length. The gauge I recieved was stamped for 260Rem as ordered. However, the gauge was actually machined to fit 243Win. It was returned for exchange. Otherwise I would give a 5.

Awesome Product (20.5.2016)

I bought this to ensure the correct head space on my reloads. With it I was also able to easily determine that some factory ammo is actually out of SAAMI specs for head space which was causing partial case head separation. Also works great to check the length of your brass for trimming. A+++

This ia a great tool (5.6.2012)

I don't know how I got along woith out it. These gauges are slick and will improve your shooting..

Great tool for quick checks (27.4.2016)

I use mine (I own several calibers ) to check for case stretch after FL sizing. Easily shows if trimming is needed.

Lue 14 arvostelua lisää brownells.com sivustolla

54.9 54.9 66 EUR

Tuotenro: 749003862
L.E. WILSON, INC. 7.62X39MM CASE GAGE
Valmistajan tuotenumero: CG762 Kasetti tapauksessa gage tärkein käyttö perustaa 7⁄8 "-14 paina tyyppi täyspitkä koon kuolee. Yleinen virhe uudelleenlastauksen on ylisuuret messinki. Headspace potkut tapauksissa nopeasti ja tarkasti määritettävissä tämän työkalun ja paksuus. Säännöllinen Style: Yksiosainen gage tarkistaa kokonaispituus osoittamaan leikkaus ja datum pään pituus tarpeen varmistaa oikea headspace estää yli mitoitus. Säädettävä tyyli: Varten turvavyötä mags. Vaikka vyö tukee oikea headspace, elämän tapauksessa huomattavasti lyhentää ellei koon pidetään vähän aikaa hartia. TILAUKSESTA TAPAUKSESSA GAGES TARJOLLA---TOIMENPIDE PITUUS VAIN

54.9 EUR 3 54,90 € *

Toimitusaika noin 2-4 viikkoa.
3 kpl. USA:n varastossa

Ominaisuudet: Patruuna: 7.62 x 39 mm

L.E. WILSON, INC. WILSON CASE GAGE

Asiakasarviot: L.E. WILSON, INC. 7.62X39MM CASE GAGE

Ominaisuudet

Tuotekuvaus

Asiakasarviot: L.E. WILSON, INC. 7.62X39MM CASE GAGE

L.E. WILSON, INC.
WILSON CASE GAGE