INCLUDES – Type S – Bushing Full Sizing Die Type S – Bushing Neck Sizing Die Competition Seating Die Redding Reloading Equipment has once again established a new die set based on customer feedback. The past few years you have seen the introduction of many new sets like the National Match, Master Hunter and the Premiums as a result of changing trends in the category and stated desires of the customer base. The latest, the Redding, Type S Elite die set is also a direct result of customer feedback and is available for 85 different cartridges. The Type S Elite set is comprised of a Type S Bushing Full Die, A Type S Bushing Neck Die and the unparalleled Redding Competition Seating Die. All Type-S dies use an interchangeable bushing to control neck diameter and tension to an increment of 0.001”. Bushings are available in hardened steel but also are available with a TIN (Titanium Nitride) coating for even greater lubricity. This allows the handloader complete control and precision when setting the appropriate neck tension without fear of over working the brass in the case neck. These bushings are also free-floating to self- center on the case neck for a higher degree of sizing accuracy. These features provide not only an enhanced degree of control but significant improvements to consistency and accuracy of the final loaded rounds.
Laadukas ja tarkka TYPE-S ELITE BUSHING DIE SET
Reddingin TYPE-S ELITE BUSHING DIE SET on suunniteltu erityisesti 22-250 Remington -patruunoille ja tarjoaa käsityöläiselle täydellisen hallinnan ja tarkkuuden. Tämä die set on kehitetty asiakaspalautteen perusteella, ja se on saatavilla jopa 85 eri patruunalle.
Tuotteen sisältö
- Type S – Bushing Full Sizing Die
- Type S – Bushing Neck Sizing Die
- Competition Seating Die
Type S Elite -setti koostuu Type S Bushing Full Die:stä, Type S Bushing Neck Die:stä ja vertaansa vailla olevasta Redding Competition Seating Die:stä. Kaikki Type-S -die:t käyttävät vaihdettavia bushingeja, jotka säätelevät kaulan halkaisijaa ja jännitystä tarkkuudella 0.001”.
Bushingit ovat saatavilla kovetetusta teräksestä, mutta myös TIN (Titanium Nitride) pinnoitteella, joka tarjoaa vielä paremman voitelun. Tämä mahdollistaa käsityöläiselle täydellisen hallinnan ja tarkkuuden oikean kaulajännityksen asettamisessa ilman pelkoa messinkikotelon liiallisesta työstämisestä.
Nämä bushingeja ovat myös vapaasti liikkuvia, mikä mahdollistaa itse keskittämisen patruunan kaulassa, parantaen näin koon tarkkuutta. Nämä ominaisuudet tarjoavat ei vain parannettua hallintaa, vaan myös merkittäviä parannuksia lopullisten ladattujen patruunoiden johdonmukaisuuteen ja tarkkuuteen.