Brownells Finland - Laajin valikoima aseen osia, lippaita, ammuntatarvikkeita, asesepän työkaluja ja optiikkaa Suomi
811291030023 100061466
Mountain Tactical Company is proud to announce our Gen3 Elite Series Stainless Steel Recoil lugs for your Tikka T3 and Tikka T3x rifle. Mountain Tactical’s latest generation of recoil lugs are a significant upgrade from the second generation of lugs.  Previously, we used 316 marine grade stainless steel which had a yield strength of 89,000 psi.  This was a major improvement from the factory aluminum lug which has a yield strength of 21,000 psi or the T3x mild steel lug which has a yield strength of 36,000 psi (significantly less than the standard psi generated by modern rifle cartridges).  Now we have upgraded the stainless steel we use to 17-4PH H900 stainless steel.  The yield strength of this remarkable steel is 200,000 psi. That is 33% stronger than Grade 5 Titanium! Mountain Tactical proudly manufactures their Gen3 Elite Series Stainless Steel Recoil Lugs from 17-4PH H900 Stainless Steel for the ultimate in weather resistance and a lifetime of service. Installation is simple.  Simply remove the two action screws and separate your action from the stock.  Using a pair of pliers, remove the existing metal piece from the stock.  Then push the Elite Series Recoil Lug into the same recess.  Put your action and stock back together and tighten your action screws.  You are done! Note that sometimes it can take a little longer to line up your action and stock because of the tighter tolerances of the recoil lug. The Mountain Tactical Company Elite Series Recoil Lugs for the Tikka T3 are of the finest quality you will find anywhere.
59.9 59.9 1 EUR
Tuotenro: 100061466
Tikka T3/T3X rekyylivastin
Valmistajan tuotenumero: T3T3XESL 811291030023 Erittäin kestävästä 17-4PH H900 ruostumattomasta teräksestä koneistettu rekyylivastin korvaa Tikka T3:n alumiinisen tai T3X:n pehmeämmän teräsosan, erityisesti isompikaliiperisiin aseisiin. Erittäin kestävästä 17-4PH H900 ruostumattomasta teräksestä koneistettu rekyylivastin korvaa Tikka T3:n alumiinisen tai T3X:n pehmeämmän teräsosan, erityisesti isompikaliiperisiin aseisiin.
59.9 EUR 0 59,90 € *
Jälkitilaus, toimitusaika n. 4-12 viikkoa USA:n varastosta.
Ominaisuudet: Malli: T3, T3x Merkki: Tikka

Ominaisuudet

Malli: T3,T3x Valmistaja: Tikka Toimituksen paino: 0,025kg Toimituksen korkeus: 152mm Toimituksen leveys: 76mm Toimituksen pituus: 152mm

Tuotekuvaus

Made in USA



Mountain Tactical Company is proud to announce our Gen3 Elite Series Stainless Steel Recoil lugs for your Tikka T3 and Tikka T3x rifle. Mountain Tactical’s latest generation of recoil lugs are a significant upgrade from the second generation of lugs.  Previously, we used 316 marine grade stainless steel which had a yield strength of 89,000 psi.  This was a major improvement from the factory aluminum lug which has a yield strength of 21,000 psi or the T3x mild steel lug which has a yield strength of 36,000 psi (significantly less than the standard psi generated by modern rifle cartridges).  Now we have upgraded the stainless steel we use to 17-4PH H900 stainless steel.  The yield strength of this remarkable steel is 200,000 psi. That is 33% stronger than Grade 5 Titanium! Mountain Tactical proudly manufactures their Gen3 Elite Series Stainless Steel Recoil Lugs from 17-4PH H900 Stainless Steel for the ultimate in weather resistance and a lifetime of service. Installation is simple.  Simply remove the two action screws and separate your action from the stock.  Using a pair of pliers, remove the existing metal piece from the stock.  Then push the Elite Series Recoil Lug into the same recess.  Put your action and stock back together and tighten your action screws.  You are done! Note that sometimes it can take a little longer to line up your action and stock because of the tighter tolerances of the recoil lug. The Mountain Tactical Company Elite Series Recoil Lugs for the Tikka T3 are of the finest quality you will find anywhere.
Uutiskirje