SWITCHBACK 2.0 LARGE FLASHLIGHT RING WITH POCKET CLIP The SwitchBack® 2.0 adds a multi-function finger ring and robust pocket clip to your tactical flashlight. It mounts securely between the light’s tailcap and body, providing a repeatable grip index during deployment from pocket or pouch, and enhances ergonomics while shooting or searching. The SwitchBack® 2.0 is the next evolution in the innovative SwitchBack Flashlight Ring product line. It incorporates new features and refinements based on thousands of hours of use by our subject matter experts and customers. The SwitchBack mounts between the tailcap and body of your flashlight, making it secure regardless of impact, moisture, and heat/cold changes. FEATURES: SwitchBacks can be used with handguns or long guns. It allows the user to: Reliably deploy and index a flashlight from both pockets and pouches, using the SwitchBack’s rigid, but releasable, retention ring. Shoot using a natural two-handed grip (the SwitchBack Technique). Employ all traditional low-light techniques such as Neck Index, Modified FBI, and Harries. Positively retain the light when drawing a firearm, reloading, and addressing a malfunction. The SwitchBack provides fast deployment and enhanced retention during many activities such as climbing, backpacking, car and home maintenance, and self-defense. New for SwitchBack 2.0: A finger ring that releases under heavy force/torque but can be reset. A stronger pocket clip that also works with MOLLE/PALS webbing. A pocket clip position that allows for slightly deeper carry than the SwitchBack® Large (original). A tubular portion that is cut lower to allow grip on both sides of the tail-cap during installation. A wider thumb rest with traction features. Small crush ribs on the SwitchBack 2.0’s lip that create a custom fit across a broader range of lights. An aluminum spacer that expands compatibility to Streamlight HL and HL-X flashlights and other manufacturers with similar designs. Installation For installation, first try installing the SwitchBack on your light without use of the O-ring or aluminum washer. Simply unscrew the tailcap, add the SwitchBack, and rescrew the tailcap back on. If the light does not activate upon use of the tailcap switch with the SwitchBack installed, try installing the aluminum washer as shown in the diagram below. Streamlight models tend to require the aluminum washer, but may not, depending on the tailcap features of the light. Elzetta and Surefire models do not usually require the aluminum washer, but users may find that addition of the rubber O-ring will help to stabilize the position of the SwitchBack
SWITCHBACK 2.0 - Monipuolinen ja kestävä taskulamppurenkaasi
SWITCHBACK 2.0 LARGE FLASHLIGHT RING WITH POCKET CLIP on innovatiivinen lisävaruste, joka parantaa taktisten taskulamppujen käyttöä. Tämä tuote yhdistää monitoimisen sormirenkaan ja vankan taskuklipsin, mikä tekee siitä erinomaisen valinnan sekä ammattilaisille että harrastajille.
Tuotteen ominaisuudet:
- Monipuolinen käyttö: SwitchBacks voidaan käyttää sekä pistoolien että pitkien aseiden kanssa.
- Luotettava käyttö: Mahdollistaa taskulampun nopean ja varman käytön taskuista ja laukuista.
- Luonnollinen ote: Voit ampua luonnollisella kahden käden otteella (SwitchBack-tekniikka).
- Perinteiset matalan valon tekniikat: Käytä Neck Index, Modified FBI ja Harries -tekniikoita.
- Vahva pito: Taskulamppu pysyy varmasti paikallaan aseen nostamisen, lataamisen ja vian korjaamisen aikana.
- Nopea käyttö: SwitchBack tarjoaa nopean käyttöönoton ja parannetun pidon erilaisissa aktiviteeteissa, kuten kiipeilyssä, vaelluksessa, auton ja kodin huollossa sekä itsesuojelussa.
Uudet ominaisuudet SwitchBack 2.0:ssa:
- Vapautuva sormirengas: Renkaat vapautuvat voimakkaasta voimasta/kiertovoimasta, mutta ne voidaan palauttaa.
- Vahvempi taskuklipsi: Toimii myös MOLLE/PALS-hihnojen kanssa.
- Syvempi kantokyky: Taskuklipsi on sijoitettu siten, että se mahdollistaa syvemmän kantamisen verrattuna alkuperäiseen SwitchBack® Large -malliin.
- Leveämpi peukalotuki: Varustettu kitkapinnoilla paremman otteen saavuttamiseksi.
- Erityiset puristusurat: SwitchBack 2.0:n reunoilla, jotka luovat mukautuvan istuvuuden laajemmalle valikoimalle taskulamppuja.
- Alumiinivälikappale: Laajentaa yhteensopivuutta Streamlight HL ja HL-X -taskulamppujen sekä muiden vastaavien valmistajien kanssa.
Asennusohjeet:
Asennusta varten kokeile ensin SwitchBackin asentamista ilman O-renkaiden tai alumiinivälikappaleen käyttöä. Irrota vain taskulampun häntäosa, lisää SwitchBack ja kierrä häntäosa takaisin paikalleen. Jos lamppu ei aktivoidu häntäosan kytkimen käytön aikana SwitchBackin ollessa asennettuna, kokeile asentaa alumiinivälikappale ohjeen mukaan. Streamlight-mallit vaativat yleensä alumiinivälikappaleen, mutta se voi vaihdella lampun häntäosan ominaisuuksista riippuen. Elzetta ja Surefire -mallit eivät yleensä vaadi alumiinivälikappaletta, mutta käyttäjät voivat huomata, että kuminen O-renkaiden lisääminen auttaa vakauttamaan SwitchBackin asentoa.