Material: 7075 Aluminum Coating: Matte Black Hardcoat Overall Length: 1.780" Overall Width: 1.1" Mounting Hardware: (2) 6-32 Flat Head Screws, (1) 6-32 X 3/16 Set Screw Red Dot Fitment: Trijicon RMR, Holosun HS507C This mounts fits: Baby Desert Eagle (Post 2006) EAA Witness Elite Match This mount does not fit: Rock Island 1911s Simply remove the rear sight on your gun and replace it with our mount in order to mount your Trijicon RMR red dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs 2 Flat Head Cap Screws - Provided for Trijicon RMR The screws that are included with this mount require a 5/64'' allen wrench for installation.
Esittely: S&W REVOLVER TRIJICON RMR SIGHT MOUNT
Valmistaja: EGW
Materiaali: 7075 Alumiini
Päällyste: Matte Black Hardcoat
Kokonaispituus: 1.780"
Kokonaisleveys: 1.1"
Asennusosat: (2) 6-32 Flat Head Screws, (1) 6-32 X 3/16 Set Screw
Red Dot -sovitus: Trijicon RMR, Holosun HS507C
Tämä mount sopii:
- Baby Desert Eagle (Post 2006)
- EAA Witness Elite Match
Tämä mount ei sovi:
Poista vain takasight aseestasi ja vaihda se meidän mounttiimme, jotta voit asentaa Trijicon RMR red dot sightin. Muutoksia ei vaadita. Voit poistaa mountin ja vaihtaa takasightin milloin tahansa. Asennusosat sisältyvät.
Asennusohjeet
- Poista takasight*
- Asenna EGW Sight Mount dovetailen
- Tiivistä set screw (jos sovellettavissa)
- Aseta red dot sight EGW Sight Mountiin (pienellä paperinpalan käytöllä red dot sightin ja sight mountin väliin helpotat poistamista ja pidät Loctitea pois red dot sightista).
- Levitä sinistä Loctitea mukana tuleville asennusruuveille
- Väännä asennusruuvit 15in/lbs
2 Flat Head Cap Screws - Tarjotaan Trijicon RMR:lle. Mukana olevat ruuvit vaativat 5/64'' allen avainta asennukseen.