Brownells Finland - Laajin valikoima aseen osia, lippaita, ammuntatarvikkeita, asesepän työkaluja ja optiikkaa Suomi

APEX TACTICAL SPECIALTIES INC
S&W M&P M2.0 CURVED FORWARD SET TRIGGER KIT

854751007043 100039289
An Enhanced Trigger Kit for the Smith & Wesson M&P M2.0
Smith & Wesson made great strides in the redesign of the trigger found in the M2.0 models of its M&P pistol lineup. However, improved though it may be, it's still a factory trigger at the end of the day, and factory triggers can always be improved. Enter the Apex Tactical Curved Forward Set Trigger Kit designed for the M&P M2.0. When installed, the Apex Tactical Curved Forward Set Trigger Kit, shooters will experience a more consistent trigger pull that's smoother, features shorter overtravel and has a shortened reset point. The kit drops into any factory M&P M2.0 handgun with no fitting or finishing required, but professional armorer or gunsmith-installation is recommended to avoid any potential issues. Depending on which trigger-return spring is installed, the Apex Tactical Curved Forward Set Trigger Kit lowers pull weight to between 3 and 4 pounds, and total trigger-travel distance is similar to a factory 1911. The curved trigger face provides a shorter trigger reach for smaller hands, and the center-mounted safety preserves all the OEM safety elements found in the gun. This kit is applicable to M2.0 models of the Smith & Wesson M&P only. It will not work in original M&P pistols or the M&P Shield.
299.9 299.9 1 EUR
Tuotenro: 100039289
APEX TACTICAL SPECIALTIES INC S&W M&P M2.0 CURVED FORWARD SET TRIGGER KIT
Valmistajan tuotenumero: 100-167 854751007043 Smith & Wesson on tehnyt suuria edistysaskelia suunnittelemalla uudelleen liipaisimen, joka löytyy sen M&P-pistoolisarjan M2.0-malleista. Vaikka liipaisin onkin parannettu, on se loppujen lopuksi tehdasliipaisin, ja tehdasliipaisimia voi aina parantaa. Tässä tulee mukaan Apex Tactical Curved Forward Set Trigger Kit, joka on suunniteltu M&P M2.0:lle. Asennettuna Apex Tactical Curved Forward Set Trigger Kit tarjoaa ampujille tasaisemman liipaisinvedon, joka on sujuvampi, sisältää lyhyemmän yliliikkeen ja jolla on lyhennetty palautuspiste. Sarja asennetaan mihin tahansa tehtaan M&P M2.0 -käsiaseeseen ilman sovittamista tai viimeistelyä, mutta ammattimaisen aseseppä- tai aseasentajan asennus on suositeltavaa mahdollisten ongelmien välttämiseksi. Riippuen siitä, mikä liipaisimen palautusjousi on asennettu, Apex Tactical Curved Forward Set Trigger Kit alentaa vetopainoa 3 ja 4 punnan välillä, ja kokonaisliipaisumatka on samankaltainen kuin tehtaan 1911:ssä. Kaareva liipaisinpinta tarjoaa lyhyemmän liipaisinetäisyyden pienemmille käsille, ja keskellä sijaitseva turvallisuus säilyttää kaikki OEM-turvallisuuselementit, jotka löytyvät aseesta. Tämä sarja soveltuu vain Smith & Wessonin M&P:n M2.0-malleihin. Se ei toimi alkuperäisissä M&P-pistooleissa tai M&P Shieldissä.
299.9 EUR 0 299,90 € *
Jälkitilaus, toimitusaika n. 4-12 viikkoa USA:n varastosta.
Ominaisuudet: Malli: M&P M2.0 Merkki: Smith & Wesson Tyyppi: Curved Viimeistely: Black

Ominaisuudet

Malli: M&P M2.0 Tyyli: Curved Valmistaja: Smith & Wesson Viimeistely: Black Toimituksen paino: 0,045kg Toimituksen korkeus: 25mm Toimituksen leveys: 102mm Toimituksen pituus: 102mm

Tuotekuvaus

Made in USA
USA:n vientiluvan tyyppi: 0A501.c



An Enhanced Trigger Kit for the Smith & Wesson M&P M2.0
Smith & Wesson made great strides in the redesign of the trigger found in the M2.0 models of its M&P pistol lineup. However, improved though it may be, it's still a factory trigger at the end of the day, and factory triggers can always be improved. Enter the Apex Tactical Curved Forward Set Trigger Kit designed for the M&P M2.0. When installed, the Apex Tactical Curved Forward Set Trigger Kit, shooters will experience a more consistent trigger pull that's smoother, features shorter overtravel and has a shortened reset point. The kit drops into any factory M&P M2.0 handgun with no fitting or finishing required, but professional armorer or gunsmith-installation is recommended to avoid any potential issues. Depending on which trigger-return spring is installed, the Apex Tactical Curved Forward Set Trigger Kit lowers pull weight to between 3 and 4 pounds, and total trigger-travel distance is similar to a factory 1911. The curved trigger face provides a shorter trigger reach for smaller hands, and the center-mounted safety preserves all the OEM safety elements found in the gun. This kit is applicable to M2.0 models of the Smith & Wesson M&P only. It will not work in original M&P pistols or the M&P Shield.
Uutiskirje