Carry more ammunition “at the ready”: Professional operators who are unwilling to sacrifice quality, performance, and durability, will find Mesa Tactical’s polymer shotshell carriers to be an especially attractive and economical alternative to the low-cost consumer grade plastic shell holders offered by competitors. SureShell® Polymer Shotshell Carriers are made from durable, impact resistant polymer. This shotshell carrier system, available in a six shell configuration, features shell holders injection molded from glass filled polymer, secured to the receiver by a lightweight aluminum back plate with brass threaded inserts. The SureShell Polymer Carrier also includes an innovative dual rubber friction system that reliably holds shotshells in place. Some SureShell carriers include high temperature adhesive backed, die-cut rubber gaskets to protect the host shotgun’s finish. The Sureshell receiver mounting system for Remington 870, 1100 and 11-87 shotguns uses a combination of steel fasteners threaded into a steel pin (at the rear) and paired Chicago screws (up front) for more secure attachment to the shotgun without the risk of pinching the receiver. The mounting plate even features a window over the shotgun serial number location, to make it easier for armorers to inventory their weapons. Models are available with and without integral Picatinny rails for mounting optics. Like all SureShell carriers, the new polymer SureShell shotshell carriers work well in all climates and environments, and are designed to withstand the daily use and abuse to which arsenal weapons are commonly subjected. This system securely holds shells in place until needed at which time they are readily accessible and easily removed for rapid reloading.
SPECS: Injection molded from glass filled polymer, lightweight aluminum backplate, matte black. For 12 gauge only. All models include mounting hardware, rubber gasket, and installation instructions. Right Hand models only. Remington Sidemount fits models 870/1100/11-87 (may require modification to gun). Rem 6-Round Sidemount – 6¼” (15.8cm) long x 1½” high. 5.4 oz. (152g) wt. Rem 8-Round Sidemount – 7¾” (19.7) long x 1½” high. 7 oz. (200g) wt. Remington Picatinny fits models 870/1100/11-87 (may require modification to gun). 7” (15.8cm) long x 2½” (6.3cm) high. 7.6 oz. (215g) wt. Mossberg fits models 500/590. 6-round ony. 6-3⁄8" (16.2cm) long x 1-3⁄8" (3.5cm) high. 5.2 oz. (147g) wt.Benelli Sidemount fits M1/M2/M3. Benelli 6-Round Sidemount – 6” (15.2cm) long x 2½” high. 6.3 oz. (179g) wt. Benelli Picatinny available for M2 (requires drilling tapping receiver to fit M1), M4/M1014, and Supernova. Benelli M2 6-Round Picatinny – 6” long x 2 (5.1cm)” high. 7.4 oz. (210g) wt. Benelli M4/M1014 6-Round Picatinny – 6” long x 2” (5.1cm) high. 7.5 oz. (213g) wt.
* Requires use of shorter forend on Rem 870.
+ Requires minor forend alterations to fit Rem 1100/11-87.
** Requires drilling/tapping receiver to fit M1.
Valmistaudu ampumaan enemmän!
Mesa Tacticalin SureShell® polymer shotshell carrier on erinomainen valinta ampujille, jotka arvostavat laatua, suorituskykyä ja kestäviä tuotteita. Tämä ammuksille tarkoitettu kantolaite on taloudellinen vaihtoehto kilpailijoiden edullisille muovikannattimille.
Ominaisuudet:
- Valmistettu kestävästä, iskunkestävästä polymerista.
- Kuuden patruunan konfiguraatio.
- Patruunapidikkeet ruiskupuristettua lasikuitupolymeria.
- Kevyt alumiininen taustalevy messinkikierteillä.
- Innovatiivinen kaksoiskumipitojärjestelmä, joka pitää patruunat paikallaan.
- Korkean lämpötilan liimattuja, muotoon leikattuja kumitiivisteitä, jotka suojaavat aseen pintakäsittelyä.
- Yhteensopiva Remington 870, 1100 ja 11-87 -kiväärien kanssa.
- Turvallinen kiinnitys ilman vaaraa vastaanottimen puristumisesta.
- Selkeä ikkuna aseen sarjanumeron kohdalla, helpottaa aseiden inventointia.
Tekniset tiedot:
- Materiaalit: Ruiskupuristettu lasikuitupolymeri, kevyt alumiinitaustalevy, mattamusta.
- 12 kaliiperille vain.
- Kaikki mallit sisältävät kiinnitystarvikkeet, kumitiivisteen ja asennusohjeet.
- Oikeakätiset mallit vain.
- Remington Sidemount sopii malleihin 870/1100/11-87 (voi vaatia muutoksia aseeseen).
- Rem 6-Round Sidemount – 6¼” (15.8cm) pitkä x 1½” korkea. Paino: 5.4 oz. (152g).
- Rem 8-Round Sidemount – 7¾” (19.7cm) pitkä x 1½” korkea. Paino: 7 oz. (200g).
- Mossberg sopii malleihin 500/590. 6 patruunaa vain. 6-3/8" (16.2cm) pitkä x 1-3/8" (3.5cm) korkea. Paino: 5.2 oz. (147g).
- Benelli Sidemount sopii M1/M2/M3. Benelli 6-Round Sidemount – 6” (15.2cm) pitkä x 2½” korkea. Paino: 6.3 oz. (179g).
- Benelli Picatinny saatavilla M2:lle (vaatii poraamista M1:een), M4/M1014 ja Supernova.
- Benelli M2 6-Round Picatinny – 6” pitkä x 2” (5.1cm) korkea. Paino: 7.4 oz. (210g).
- Benelli M4/M1014 6-Round Picatinny – 6” pitkä x 2” (5.1cm) korkea. Paino: 7.5 oz. (213g).
* Vaatii lyhyemmän etuosa Rem 870:lle. + Vaatii pieniä muutoksia etuosaan sopiakseen Rem 1100/11-87:ään. ** Vaatii poraamista/kuulakierteitä M1:een.