The Stribog Muzzle Extension was designed to be used in conjunction with the KDG SRX models; Stribog Receiver Extensions. These muzzle extensions thread onto the Stribog barrel, extending the end of the muzzle an extra 3 to 6 inches. This device is important for directing the blast of the muzzle forward of the Stribog Receiver Extension, protecting the users’ arms and hands during weapon firing and manipulations. Both the SMX3 and SMX6 thread onto the end of the muzzle using standard 1/2×28 threads and are constructed from a mild C1018 steel so that it can easily be welded, if required, to keep in compliance with local and federal firearms laws and regulations (BOO!). Bolstering a knurled forend for a slip free grip to aid in installation and removal, confirming securement and for a pleasingly aesthetic appearance. *** Is a stand-alone muzzle device not to be used, or modified to be used, with another such muzzle device *** The Stribog Muzzle Extension 3 inch (SMX3) can ONLY be used in conjunction with KDG Stribog Receiver Extension 3 inch (SRX3) – The SMX3 is not long enough to safely be used with the SRX6. Severe bodily harm can occur if installed in conjunction with the SRX6 receiver extension!
Laajenna Stribog SP9:n mahdollisuuksia SMX3 suppressorilla!
Stribog Suppressor Extension on suunniteltu käytettäväksi yhdessä KDG SRX -mallien kanssa; Stribog Receiver Extensions. Nämä suppressorilaajennukset kierteitetään Stribogin piippuun, pidentäen suppressorin päätä 3-6 tuumalla. Tämä laite on tärkeä, sillä se ohjaa piipun räjähdyksen Stribog Receiver Extensionin eteen, suojaten käyttäjän käsiä ja käsiä aseella ampumisen ja käsittelyn aikana.
Ominaisuudet:
- SMX3 ja SMX6 kierteitetään piipun päähän käyttäen standardeja 1/2×28 kierteitä.
- Valmistettu C1018-miedosta teräksestä, joka voidaan tarvittaessa helposti hitsata, jotta se täyttää paikalliset ja liittovaltion aseet säätelevät lait.
- Varustettu uritetulla etuosalla, joka tarjoaa liukumattoman otteen asennuksen ja poistamisen helpottamiseksi.
- Varmistaa turvallisuuden ja miellyttävän esteettisen ulkonäön.
Huom: Tämä on itsenäinen suppressorilaite, eikä sitä saa käyttää tai muokata käytettäväksi toisenlaisen suppressorilaitteen kanssa.
Stribog Suppressor Extension 3 tuumaa (SMX3) voidaan KÄYTTÄÄ VAIN yhdessä KDG Stribog Receiver Extension 3 tuuman (SRX3) kanssa – SMX3 ei ole tarpeeksi pitkä käytettäväksi SRX6:n kanssa. Vakavia vammoja voi tapahtua, jos se asennetaan yhdessä SRX6 receiver extensionin kanssa!