Brownells Finland - Laajin valikoima aseen osia, lippaita, ammuntatarvikkeita, asesepän työkaluja ja optiikkaa Suomi

FORWARD CONTROLS DESIGN
SLING ADAPTER END PLATE, HVY, 1 SOCKET DLC BLACK

686162347964 430103566
ESF-H1 (End plate, Sling Adapter, Forward Controls Design, Heavy, 1 socket) is a drop in end plate replacement for the AR platform (both 223 and 308 spec). ESF-H1 is available in 4140 steel, DLC or phosphate coated versions. ESF has rotation limited side facing sockets. The rear facing socket has no limiters, as the receiver extension effectively limits the swivel’s rotation. End plates that incorporate side facing QD swivel sockets can mask available wrench notches required for torquing. A conventional castle nut wrench has 3 lugs, in some cases, the socket housing may partially block access to one of them. A 2 lug castle nut wrench, such as the AR Multitasker, or our JCW (Joint Castle nut Wrench) would be required to torque the castle nut properly. ESF's receiver extension indexing tab can be tight on some receiver extensions. ESF-H1 (rear socket only) does not have rotation limiters, as the QD sling swivel is prevented from rotating 360 degrees by the receiver extension.  
74.9 84.9 2 EUR
New
Tuotenro: 430103566
FORWARD CONTROLS DESIGN SLING ADAPTER END PLATE, HVY, 1 SOCKET PHOS BLK
Valmistajan tuotenumero: ESFH1, PHOS BL 686162347964
74.9 EUR 0 74,90 € *
Jälkitilaus, toimitusaika n. 4-12 viikkoa USA:n varastosta.
Ominaisuudet: Väri: Black

Ominaisuudet

Väri: Black Toimituksen paino: 0,522kg Toimituksen korkeus: 20mm Toimituksen leveys: 83mm Toimituksen pituus: 140mm

Tuotekuvaus

Made in USA



New
Tuotenro: 430103565
FORWARD CONTROLS DESIGN SLING ADAPTER END PLATE, HVY, 1 SOCKET DLC BLK
Valmistajan tuotenumero: ESFH1, DLC BLK 686162347957
84.9 EUR 0 84,90 € *
Jälkitilaus, toimitusaika n. 4-12 viikkoa USA:n varastosta.
Ominaisuudet: Väri: Black
ESF-H1 (End plate, Sling Adapter, Forward Controls Design, Heavy, 1 socket) is a drop in end plate replacement for the AR platform (both 223 and 308 spec). ESF-H1 is available in 4140 steel, DLC or phosphate coated versions. ESF has rotation limited side facing sockets. The rear facing socket has no limiters, as the receiver extension effectively limits the swivel’s rotation. End plates that incorporate side facing QD swivel sockets can mask available wrench notches required for torquing. A conventional castle nut wrench has 3 lugs, in some cases, the socket housing may partially block access to one of them. A 2 lug castle nut wrench, such as the AR Multitasker, or our JCW (Joint Castle nut Wrench) would be required to torque the castle nut properly. ESF's receiver extension indexing tab can be tight on some receiver extensions. ESF-H1 (rear socket only) does not have rotation limiters, as the QD sling swivel is prevented from rotating 360 degrees by the receiver extension.  
Uutiskirje