Brownells Finland - Laajin valikoima aseen osia, lippaita, ammuntatarvikkeita, asesepän työkaluja ja optiikkaa Suomi

BROWNELLS
SHOTGUN MAINSPRING TOOL

050806107243 080000114
Stop Fighting With Stubborn Mainsprings
Specially designed tool shortens the time and eliminates the frustration that goes along with changing mainsprings in double barrel shotguns. Notched, blade tip captures the plunger head so you can compress the spring and lift both parts free from the receiver. No more scratching and gouging the plunger or inner receiver surfaces with an ordinary screwdriver. Tool works equally well for installation simply seat the end of the mainspring in the receiver, hook the blade notch around the plunger head, compress the spring, and engage the plunger in the hammer. Stout, hardened steel shank provides plenty of leverage and keeps you close to your work for maximum control.
SPECS: Shank - Steel, hardened to Rc 58-60. 1½" (6.3cm) x 5/16" (7.9mm) dia. Handle - Plastic. 3¾" (9.5cm) x 1" (2.5cm) dia.
28.9 28.9 1 EUR
Tuotenro: 080000114
BROWNELLS SHOTGUN MAINSPRING TOOL 050806107243 Erityisesti suunniteltu työkalu lyhentää aikaa ja poistaa turhautumisen, joka liittyy kaksoispiippuisten haulikoiden pääjousien vaihtamiseen. Urallinen teräkärki tarttuu mäntäpään, jotta voit puristaa jousen ja nostaa molemmat osat vapaaksi vastaanottimesta. Ei enää naarmuja ja uurteita männässä tai vastaanottimen sisäpinnoilla tavallisella ruuvimeisselillä. Työkalu toimii yhtä hyvin asennuksessa – aseta vain pääjousen pää vastaanottimeen, koukuta teräuralla mäntäpää, purista jousi ja kiinnitä mäntä vasaraan. Vahva, karkaistu teräsvarsi tarjoaa runsaasti vipuvoimaa ja pitää sinut lähellä työtäsi maksimaalisen hallinnan takaamiseksi.
28.9 EUR 0 28,90 € *
Jälkitilaus, toimitusaika n. 4-12 viikkoa USA:n varastosta.
Ominaisuudet: Materiaali: Steel Merkki: Universal Shotguns

Ominaisuudet

Materiaali: Steel Valmistaja: Universal Shotguns Toimituksen paino: 0,045kg Toimituksen korkeus: 23mm Toimituksen leveys: 74mm Toimituksen pituus: 142mm

Tuotekuvaus

Made in USA



Stop Fighting With Stubborn Mainsprings
Specially designed tool shortens the time and eliminates the frustration that goes along with changing mainsprings in double barrel shotguns. Notched, blade tip captures the plunger head so you can compress the spring and lift both parts free from the receiver. No more scratching and gouging the plunger or inner receiver surfaces with an ordinary screwdriver. Tool works equally well for installation simply seat the end of the mainspring in the receiver, hook the blade notch around the plunger head, compress the spring, and engage the plunger in the hammer. Stout, hardened steel shank provides plenty of leverage and keeps you close to your work for maximum control.
SPECS: Shank - Steel, hardened to Rc 58-60. 1½" (6.3cm) x 5/16" (7.9mm) dia. Handle - Plastic. 3¾" (9.5cm) x 1" (2.5cm) dia.
Uutiskirje