Brownells Finland - Laajin valikoima aseen osia, lippaita, ammuntatarvikkeita, asesepän työkaluja ja optiikkaa Suomi

EGW
SAVAGE 99 HD PICATINNY SCOPE MOUNT

841370117666 296000751
EGW recommends measuring the hole spacing in your receiver to confirm it matches with the dimensions they have published. Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. EGW one-piece scope mounts are the obvious choice for hunters and tactical shooters alike. This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings. EGW machines these in their shop using one of their machining centers. After machining, the mounts are tumbled, sand blasted, and Type III anodized for long lasting durability. Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is sold separately). The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the USA.
114.9 114.9 1 EUR
Tuotenro: 296000751
EGW SAVAGE 99 1-PIECE PICATINNY BASE 0 MOA
Valmistajan tuotenumero: 80350 841370117666 EGW suosittelee vastaanottimen reikien välimatkan mittaamista varmistaakseen, että se vastaa heidän julkaisemiaan mittoja. Picatinny-urat kulkevat kiskon koko pituuden, mikä antaa ampujalle joustavuutta kiikarinrengasten ja muiden lisävarusteiden asennuksessa. EGW:n yksiosaiset kiikaritähtäimen kiinnikkeet ovat ilmeinen valinta sekä metsästäjille että taktisille ampujille. Tämä kiinnike on Picatinny-tyylinen alusta ja yhteensopiva Picatinny- tai Weaver-kiikarinrengasten kanssa. EGW valmistaa nämä kiinnikkeet omassa työpajassaan käyttäen yhtä heidän koneistuskeskuksistaan. Koneistuksen jälkeen kiinnikkeet puhdistetaan pyörityskoneessa, hiekkapuhalletaan ja anodisoidaan Type III -menetelmällä pitkäkestoisen kestävyyden takaamiseksi. Asennus: EGW suosittelee käyttämään 20 tuumaa paunaa vääntömomenttia ja tipan sinistä loctitea (loctite myydään erikseen). Koko kiinnike ja lisävarusteet (asennusruuveista ja avaimesta aina pakkaukseen asti) on valmistettu Yhdysvalloissa.
114.9 EUR 7 114,90 € *
Toimitusaika noin 2-4 viikkoa.
7 kpl. USA:n varastossa
Ominaisuudet: Elevation: 0 MOA Jalustojen lukumäärä: 1-Piece Malli: 99 Materiaali: Aluminum Merkki: Savage Arms Tyyppi: Picatinny Rail Väri: Black

Ominaisuudet

Elevation: 0 MOA Jalustojen lukumäärä: 1-Piece Malli: 99 Materiaali: Aluminum Tyyli: Picatinny Rail Valmistaja: Savage Arms Väri: Black Toimituksen paino: 0,091kg Toimituksen korkeus: 25mm Toimituksen leveys: 102mm Toimituksen pituus: 229mm

Tuotekuvaus

Made in USA



EGW recommends measuring the hole spacing in your receiver to confirm it matches with the dimensions they have published. Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. EGW one-piece scope mounts are the obvious choice for hunters and tactical shooters alike. This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings. EGW machines these in their shop using one of their machining centers. After machining, the mounts are tumbled, sand blasted, and Type III anodized for long lasting durability. Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is sold separately). The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the USA.
Uutiskirje