R2S FLASH HIDERS These fit Plan B type mounts. Always use an alignment rod to ensure that the entire system is set up correctly. Make sure all surfaces are cleaned and the muzzle device has been torqued and Rockset to the barrel. Use on a Q can voids your warranty, be warned. Torque the muzzle device to approximately 15-25 ft lbs. Make sure the muzzle device is square against the shoulder. When setting the silencer on the muzzle device, ensure that the threads and tapers are clean. Torque the suppressor to 10 ft lbs. Ensure alignment. Enjoy. The nitride finish does lead to a tighter seal, with that said, it is extremely important to torque and rockset your muzzle device to the barrel properly. FEATURES: 17-4 PH Atlas and Atlas XL compatible Plan B compatible Black Nitride finish (67 HRC Surface hardness) Shims not included, if you would like to specifically time this, shims will be required. Note: your barrel may require a shim if the manufacturer did not put a thread relief on it.
R2S FLASH HIDER – Innovatiivinen lisävaruste äänenvaimentimille
R2S FLASH HIDERS sopivat Plan B -tyyppisiin kiinnityksiin. Käytä aina kohdistustankoa varmistaaksesi, että koko järjestelmä on asetettu oikein. Varmista, että kaikki pinnat on puhdistettu ja että suuosa on kireä ja Rocksetattu piippuun.
Huomioi, että Q-kannella käyttö mitätöi takuusi, joten ole varovainen. Kiristä suuosa noin 15-25 ft lbs. Varmista, että suuosa on suora olkaa vastaan. Kun asetat vaimenninta suuosalle, varmista, että kierteet ja kartiot ovat puhtaat. Kiristä vaimenninta 10 ft lbs. Varmista kohdistus. Nauti.
Nitride-pinta johtaa tiukempaan tiivistykseen, ja on erittäin tärkeää kiristää ja Rocksettaa suuosa piippuun oikein.
Ominaisuudet:
- 17-4 PH
- Yhteensopiva Atlas ja Atlas XL -mallien kanssa
- Yhteensopiva Plan B -järjestelmän kanssa
- Mustan nitride-pinnan kovuus (67 HRC)
- Shimmit eivät sisälly, jos haluat ajoittaa tämän tarkasti, shimmit ovat tarpeen.
- Huom: piippusi saattaa vaatia shimmin, jos valmistaja ei ole laittanut kierteiden helpotusta siihen.