Brownells Finland - Laajin valikoima aseen osia, lippaita, ammuntatarvikkeita, asesepän työkaluja ja optiikkaa Suomi

TECH TEN TACTICAL
QD STOCK INSERT FOR B5 SOPMOD STOCK

850009665072 100042578
The patent pending Tech Ten Tactical B5 Enhanced SOPMOD stock Insert adds another QD attachment point to your B5 Enhanced or Government SOPMOD stocks. If you own this stock with or without a QD attachment point, then this insert is for you. Once the insert is installed in the front of the stock it places your sling in the ideal location, away from your pistol grip and not at the rear of your stock. Also, it allows your sling to pivot up to 220 degrees when used with the Ten Tech Tactical Swinger Sling Mount (sold separately) or up to 140 degrees with a standard QD. Installation is quick and easy. B5 Insert Features Adds a QD attachment point to the front of the B5 Enhanced SOPMOD Stock, placing it in an ideal location, away from your pistol grip but not at the back of your stock Currently in use with military, law enforcement, and government agencies Constructed from 7075 aircraft-grade aluminum with a MIL-SPEC Type III hard anodized coating. Anchored with a 3/16"" stainless steel roll pin Installation is easy and takes less than five minutes Manufactured with pride in the United States Stock not included * The B5 and LMT inserts are not interchangeable. This is the proper insert for the B5 Enhanced SOPMOD stock.
59.9 59.9 1 EUR
Tuotenro: 100042578
TECH TEN TACTICAL QD STOCK INSERT FOR B5 SYSTEMS SOPMOD GOVERNMENT STOCKS
Valmistajan tuotenumero: 101 850009665072 Patenttia odottava Tech Ten Tactical B5 Enhanced SOPMOD -tukin lisäosa tarjoaa lisää QD-kiinnityspisteen B5 Enhanced- tai Government SOPMOD -tukkeihisi. Jos omistat tämän tukin, oli siinä QD-kiinnityspiste tai ei, tämä lisäosa on sinua varten. Kun lisäosa on asennettu tukin etuosaan, se sijoittaa hihnan ihanteelliseen paikkaan, kauas pistoolikahvasta eikä tukin takaosaan. Lisäksi se mahdollistaa hihnan kääntämisen jopa 220 asteen verran käytettäessä Ten Tech Tactical Swinger Sling Mountin (myydään erikseen) kanssa tai jopa 140 astetta vakio-QD:n kanssa. Asennus on nopeaa ja helppoa. B5-lisäosan ominaisuudet: Lisää QD-kiinnityspisteen B5 Enhanced SOPMOD -tukin etuosaan, sijoittaen sen ihanteelliseen paikkaan, kauas pistoolikahvasta mutta ei tukin takaosaan. Käytössä tällä hetkellä sotilaiden, lainvalvontaviranomaisten ja hallinnollisten virastojen toimesta. Valmistettu 7075-lentokonelaatuisesta alumiinista MIL-SPEC Type III -kovapinnoitteella. Kiinnitetty 3/16 tuuman ruostumattomasta teräksestä valmistetulla rullatapilla. Asennus on helppoa ja vie alle viisi minuuttia. Valmistettu ylpeydellä Yhdysvalloissa. Tukki ei sisälly pakettiin. * B5- ja LMT-lisäosat eivät ole keskenään vaihtokelpoisia. Tämä on oikea lisäosa B5 Enhanced SOPMOD -tukille.
59.9 EUR 22 59,90 € *
Toimitusaika noin 2-4 viikkoa.
Yli 10 kpl. USA:n varastossa
Ominaisuudet: Väri: Black

Ominaisuudet

Väri: Black Toimituksen paino: 0,027kg Toimituksen korkeus: 25mm Toimituksen leveys: 102mm Toimituksen pituus: 152mm

Tuotekuvaus

Made in USA
USA:n vientiluvan tyyppi: 0A501.y.1



The patent pending Tech Ten Tactical B5 Enhanced SOPMOD stock Insert adds another QD attachment point to your B5 Enhanced or Government SOPMOD stocks. If you own this stock with or without a QD attachment point, then this insert is for you. Once the insert is installed in the front of the stock it places your sling in the ideal location, away from your pistol grip and not at the rear of your stock. Also, it allows your sling to pivot up to 220 degrees when used with the Ten Tech Tactical Swinger Sling Mount (sold separately) or up to 140 degrees with a standard QD. Installation is quick and easy. B5 Insert Features Adds a QD attachment point to the front of the B5 Enhanced SOPMOD Stock, placing it in an ideal location, away from your pistol grip but not at the back of your stock Currently in use with military, law enforcement, and government agencies Constructed from 7075 aircraft-grade aluminum with a MIL-SPEC Type III hard anodized coating. Anchored with a 3/16"" stainless steel roll pin Installation is easy and takes less than five minutes Manufactured with pride in the United States Stock not included * The B5 and LMT inserts are not interchangeable. This is the proper insert for the B5 Enhanced SOPMOD stock.
Uutiskirje