Brownells Finland - Laajin valikoima aseen osia, lippaita, ammuntatarvikkeita, asesepän työkaluja ja optiikkaa Suomi
855016007983 100027272
Designed fo  fit 1/2 x 28 threaded barels, the Samson Pocket Comp for the M&P Shield and Shield 2.0 9mm installs in minutes without the need for gunsmithing. The Samson design uses a threaded interface which protects the barrel threads unlike conventional compensators. The Samson Pocket Comp for M&P 9 Shield blends with the aesthetic lines of the slide, creating the image of a slide extension. Machined from 7075 aircraft-grade billet, the Pocket Comp is Mil-Spec hard coat anodized for durability. The Pocket Comp efficiently reduces felt recoil and muzzle rise, allowing faster recovery between shots. It functionswit the factory recoil spring using a wide range of bullet weights and velocities (124gr or heavier is recommended, may work with 115gr depending on manufacturer and/or environmental conditions). Threaded barrel NOT included Reduces felt recoil and muzzle rise, allowing faster recovery between shots Ideal for iron-sight or red-dot equipped pistols Threads on to any 1/2x28 threaded 9mm barrel (not included) Machined from aircraft-grade 7075 billet with mil-std hard coat anodize for durability No-gunsmithing, easy installation/removal Functions with factory recoil spring using a wide range of bullet weights and velocities (124gr or heavier, may work with 115gr depending on manufacturer and/or temperature)
104.9 104.9 1 EUR
Tuotenro: 100027272
SAMSON MANUFACTURING CORP POCKET COMP FOR S&W SHIELD, BLACK
Valmistajan tuotenumero: 040603101 855016007983 Suunniteltu sopimaan 1/2 x 28 -kierteisiin piippuihin, Samson Pocket Comp M&P Shieldille ja Shield 2.0 9mm -malliin asennetaan minuuteissa ilman asesepän tarvetta. Samsonin suunnittelu käyttää kierreliitäntää, joka suojaa piipun kierteitä toisin kuin perinteiset kompensaattorit. Samson Pocket Comp M&P 9 Shieldille sulautuu aseen liukupinnan esteettisiin linjoihin, luoden vaikutelman liukupinnan jatkumisesta. Koneistettu 7075-luokan lentokonealumiinista, Pocket Comp on Mil-Spec -kovapinnoitettu kestävyyden takaamiseksi. Pocket Comp vähentää tehokkaasti tuntuvaa rekyyliä ja piipun nousua, mahdollistaen nopeamman palautumisen laukausten välillä. Se toimii tehdasasetuksilla palautusjousen kanssa käyttäen laajaa valikoimaa luotien painoja ja nopeuksia (suositellaan 124 gr tai raskaampia, voi toimia 115 gr luotien kanssa riippuen valmistajasta ja/tai ympäristön olosuhteista). Kierrepiippu EI sisälly pakettiin Vähentää tuntuvaa rekyyliä ja piipun nousua, mahdollistaen nopeamman palautumisen laukausten välillä Ihanteellinen rautatähtäimillä tai punapistetähtäimillä varustetuille pistooleille Kiinnittyy mihin tahansa 1/2x28 -kierrepiippuun 9mm kaliiperissa (ei sisälly) Koneistettu lentokonealumiinista 7075 billetistä, mil-std -kovapinnoitettu kestävyyden takaamiseksi Asennus/poisto helppoa ilman asesepän apua Toimii tehdasasetuksilla palautusjousen kanssa käyttäen laajaa valikoimaa luotien painoja ja nopeuksia (124gr tai raskaampia, voi toimia 115gr luotien kanssa riippuen valmistajasta ja/tai lämpötilasta)
104.9 EUR 4 104,90 € *
Toimitusaika noin 2-4 viikkoa.
4 kpl. USA:n varastossa
Ominaisuudet: Malli: M&P Shield Merkki: Smith & Wesson

Ominaisuudet

Malli: M&P Shield Valmistaja: Smith & Wesson Toimituksen paino: 0,059kg Toimituksen korkeus: 38mm Toimituksen leveys: 133mm Toimituksen pituus: 127mm

Tuotekuvaus

Made in USA



Designed fo  fit 1/2 x 28 threaded barels, the Samson Pocket Comp for the M&P Shield and Shield 2.0 9mm installs in minutes without the need for gunsmithing. The Samson design uses a threaded interface which protects the barrel threads unlike conventional compensators. The Samson Pocket Comp for M&P 9 Shield blends with the aesthetic lines of the slide, creating the image of a slide extension. Machined from 7075 aircraft-grade billet, the Pocket Comp is Mil-Spec hard coat anodized for durability. The Pocket Comp efficiently reduces felt recoil and muzzle rise, allowing faster recovery between shots. It functionswit the factory recoil spring using a wide range of bullet weights and velocities (124gr or heavier is recommended, may work with 115gr depending on manufacturer and/or environmental conditions). Threaded barrel NOT included Reduces felt recoil and muzzle rise, allowing faster recovery between shots Ideal for iron-sight or red-dot equipped pistols Threads on to any 1/2x28 threaded 9mm barrel (not included) Machined from aircraft-grade 7075 billet with mil-std hard coat anodize for durability No-gunsmithing, easy installation/removal Functions with factory recoil spring using a wide range of bullet weights and velocities (124gr or heavier, may work with 115gr depending on manufacturer and/or temperature)
Uutiskirje