MDT Detachable AICS box magazines are designed to fit the MDT TAC21, ACC, ESS, LSS-XL, XRS and LSS Chassis systems, as well as many other M24 type chassis and bottom metals. Manufactured from high quality Polymer and uses a tempered steel spring.
We put our magazines through vigorous testing.
We have used high quality strength polymer with a high glass content to ensure durability and strength.
Although not unbreakable, we have driven over these magazines with cars and trucks which did not break them
Capacity- .308/6.5 Creedmoor family of cartridges: 3 Round capacity
- MAX COAL: 2.85"
- 3.25" Tall
CompatibilityMDT AICS magazines are guaranteed to work in our HNT26, XRS, TAC21, LSS, LSS-XL, HS3, ESS and ACC chassis systems.
They do not work with the following inlets: Browning X-bolt, Winchester XPC and may require fitting in Winchester Model 70.
Based on customer feedback, the following systems work well with our magazines, but fitting may be required in some cases:
- XLR Chassis
- KRG X-Ray - Some need adjustment
- GRS riflestocks- (Configured for AICS magazines)
- CDI Precision bottom metals- (Configured for AICS magazines)
- Pacific tool and Gauge bottom metals- (Configured for AICS magazines)
Compatible Calibers- .308WIN
- 6.5 Creedmoor
- 6mm Creedmoor
- 22 - 250 Rem (will work at a reduced capacity)
- 243 Win
- 6mm XC
- 6x47 Lapua
- 260 Rem
- 6.5x47 Lapua
- 7mm-08 Win
- 308/7.62x51 NATO
Not recommended for .300 WSM. Use a metal magazine for this caliber as the feed lips need adjustment.
MDT Polymer AICS - Luotettavaa laatua ja kestävyyttä
MDT:n irrotettavat AICS-lippaikot ovat suunniteltu sopimaan MDT TAC21, ACC, ESS, LSS-XL, XRS ja LSS -alustajärjestelmiin, sekä moniin muihin M24-tyyppisiin alustoihin ja pohjametalleihin. Valmistettu korkealaatuisesta polymerista ja käyttäen temperoitua teräsp springs.
Olemme testanneet lippaamme perusteellisesti. Olemme käyttäneet korkealaatuista vahvuuspolymeeriä, jossa on korkea lasipitoisuus, varmistaaksemme kestävyys ja voima. Vaikka ne eivät ole murtumattomia, olemme ajaneet näiden lippaiden yli autoilla ja kuorma-autoilla ilman, että ne rikkoutuvat.
Kapaciteetti
- Kaliberit: .308/6.5 Creedmoor
- 3 laukauksen kapasiteetti
- MAX COAL: 2.85" (3.25" korkeus)
Yhteensopivuus
MDT AICS -lippaat ovat taatusti yhteensopivia HNT26, XRS, TAC21, LSS, LSS-XL, HS3, ESS ja ACC -alustajärjestelmien kanssa. Ne eivät toimi seuraavien liitäntöjen kanssa: Browning X-bolt, Winchester XPC ja saattavat vaatia sovitusta Winchester Model 70:ssä.
Pohjautuen asiakaspalautteeseen, seuraavat järjestelmät toimivat hyvin lippaittemme kanssa, mutta sovitusta saatetaan tarvita joissakin tapauksissa:
- XLR Chassis
- KRG X-Ray - Joissakin tapauksissa tarvitaan säätö
- GRS kiväärikahvat - (Määritelty AICS-lippaille)
- CDI Precision pohjametallit - (Määritelty AICS-lippaille)
- Pacific tool and Gauge pohjametallit - (Määritelty AICS-lippaille)
Yhteensopivat kaliberit
- .308WIN
- 6.5 Creedmoor
- 6mm Creedmoor
- 22 - 250 Rem (toimii vähennetyn kapasiteetin kanssa)
- 243 Win
- 6mm XC
- 6x47 Lapua
- 260 Rem
- 6.5x47 Lapua
- 7mm-08 Win
- 308/7.62x51 NATO
- Ei suositella .300 WSM:lle. Käytä metallista lippaita tälle kaliiperille, sillä syöttöhuulet tarvitsevat säätöä.