Brownells Finland - Laajin valikoima aseen osia, lippaita, ammuntatarvikkeita, asesepän työkaluja ja optiikkaa Suomi

MDT
COMP MUZZLE BRAKE - 4 PORT - GRN

682157407736 EU2009745
329.9 329.9 9 EUR
Tuotenro: EU2009745
MDT - Comp Muzzle Brake - 4 Port - .308 - 5/8-24 - GRN
Valmistajan tuotenumero: 106205-GRN 682157407736 The MDT [COMP BRAKE] was designed from the ground up by our sponsored shooter teams requirements, high tech mach flow gas simulations and countless hours of testing. This muzzle brake is the most effective brake currently available that also provides the least concussion to the shooter and spotter, by redirecting gas flow, allowing you to watch bullet flight and monitor hits and misses on target. Features 4 ports, strategically cut at varying angles to maximize recoil reduction as well as minimizing shooter concussionForward facing "disruptor" ports to better deflect gas away from the shooterTuneable upwards vented ports that can be open or closed with a slider mechanism for straighter rifle trackingSerrated baffle tips to for improved gas flow and lower sound generationCaliber specific bores for calibers ranging from .224-.338 calMultiple thread sizes available for each caliber configurationOptimized for commonly available PRS calibers such as the 6BR, 6mm Creedmoor and 6x47 Lapua (as well as their variants)Recessed target crown to reduce exit muzzle disturbance and protect secondary crown from damagePurpose designed, self timing lock nut that reduces run-out, increases holding strength and is designed for use with MTU contour muzzles Dimensions 78 mm (3.1") long* x 32 mm (1.25") wide x 28 mm (1.1") wideWeight: 0.44 lbs / 200.7 gMaterial: High Strength, Nitrided Steel
329.9 EUR 0 329,90 € *
Varastossa, toimitus Euroopasta 2-4 viikon kuluessa.
Ominaisuudet: Kaliiperi: 308 Caliber Kierteet: 5/8-24 Materiaali: Nitrided Steel Väri: Green

ENG: Kuvaus


The MDT [COMP BRAKE] was designed from the ground up by our sponsored shooter teams requirements, high tech mach flow gas simulations and countless hours of testing. This muzzle brake is the most effective brake currently available that also provides the least concussion to the shooter and spotter, by redirecting gas flow, allowing you to watch bullet flight and monitor hits and misses on target.

Features
  • 4 ports, strategically cut at varying angles to maximize recoil reduction as well as minimizing shooter concussion
  • Forward facing "disruptor" ports to better deflect gas away from the shooter
  • Tuneable upwards vented ports that can be open or closed with a slider mechanism for straighter rifle tracking
  • Serrated baffle tips to for improved gas flow and lower sound generation
  • Caliber specific bores for calibers ranging from .224-.338 cal
  • Multiple thread sizes available for each caliber configuration
  • Optimized for commonly available PRS calibers such as the 6BR, 6mm Creedmoor and 6x47 Lapua (as well as their variants)
  • Recessed target crown to reduce exit muzzle disturbance and protect secondary crown from damage
  • Purpose designed, self timing lock nut that reduces run-out, increases holding strength and is designed for use with MTU contour muzzles

Dimensions
  • 78 mm (3.1") long* x 32 mm (1.25") wide x 28 mm (1.1") wide
  • Weight: 0.44 lbs / 200.7 g
  • Material: High Strength, Nitrided Steel

Ominaisuudet

Kaliiperi: 308 Caliber Kierteet: 5/8-24 Materiaali: Nitrided Steel Väri: Green Toimituksen paino: 0,23kg Korkeus: 59mm Leveys: 59mm Pituus: 175mm


The MDT [COMP BRAKE] was designed from the ground up by our sponsored shooter teams requirements, high tech mach flow gas simulations and countless hours of testing. This muzzle brake is the most effective brake currently available that also provides the least concussion to the shooter and spotter, by redirecting gas flow, allowing you to watch bullet flight and monitor hits and misses on target.

Features
  • 4 ports, strategically cut at varying angles to maximize recoil reduction as well as minimizing shooter concussion
  • Forward facing "disruptor" ports to better deflect gas away from the shooter
  • Tuneable upwards vented ports that can be open or closed with a slider mechanism for straighter rifle tracking
  • Serrated baffle tips to for improved gas flow and lower sound generation
  • Caliber specific bores for calibers ranging from .224-.338 cal
  • Multiple thread sizes available for each caliber configuration
  • Optimized for commonly available PRS calibers such as the 6BR, 6mm Creedmoor and 6x47 Lapua (as well as their variants)
  • Recessed target crown to reduce exit muzzle disturbance and protect secondary crown from damage
  • Purpose designed, self timing lock nut that reduces run-out, increases holding strength and is designed for use with MTU contour muzzles

Dimensions
  • 78 mm (3.1") long* x 32 mm (1.25") wide x 28 mm (1.1") wide
  • Weight: 0.44 lbs / 200.7 g
  • Material: High Strength, Nitrided Steel



Tuotenro: EU2009743
MDT - Comp Muzzle Brake - 4 Port - 5.56 + 6mm - 1/2-28 - GRN
Valmistajan tuotenumero: 106200-GRN 682157407637 The MDT [COMP BRAKE] was designed from the ground up by our sponsored shooter teams requirements, high tech mach flow gas simulations and countless hours of testing. This muzzle brake is the most effective brake currently available that also provides the least concussion to the shooter and spotter, by redirecting gas flow, allowing you to watch bullet flight and monitor hits and misses on target. Features 4 ports, strategically cut at varying angles to maximize recoil reduction as well as minimizing shooter concussionForward facing "disruptor" ports to better deflect gas away from the shooterTuneable upwards vented ports that can be open or closed with a slider mechanism for straighter rifle trackingSerrated baffle tips to for improved gas flow and lower sound generationCaliber specific bores for calibers ranging from .224-.338 calMultiple thread sizes available for each caliber configurationOptimized for commonly available PRS calibers such as the 6BR, 6mm Creedmoor and 6x47 Lapua (as well as their variants)Recessed target crown to reduce exit muzzle disturbance and protect secondary crown from damagePurpose designed, self timing lock nut that reduces run-out, increases holding strength and is designed for use with MTU contour muzzles Dimensions 78 mm (3.1") long* x 32 mm (1.25") wide x 28 mm (1.1") wideWeight: 0.44 lbs / 200.7 gMaterial: High Strength, Nitrided Steel
329.9 EUR 0 329,90 € *
Varastossa, toimitus Euroopasta 2-4 viikon kuluessa.
Ominaisuudet: Kaliiperi: 6mm Kierteet: 1/2-28 Materiaali: Nitrided Steel Väri: Green
Tuotenro: EU2009744
MDT - Comp Muzzle Brake - 4 Port - 6.5mm - 5/8-24 - GRN
Valmistajan tuotenumero: 106203-GRN 682157407699 The MDT [COMP BRAKE] was designed from the ground up by our sponsored shooter teams requirements, high tech mach flow gas simulations and countless hours of testing. This muzzle brake is the most effective brake currently available that also provides the least concussion to the shooter and spotter, by redirecting gas flow, allowing you to watch bullet flight and monitor hits and misses on target. Features 4 ports, strategically cut at varying angles to maximize recoil reduction as well as minimizing shooter concussionForward facing "disruptor" ports to better deflect gas away from the shooterTuneable upwards vented ports that can be open or closed with a slider mechanism for straighter rifle trackingSerrated baffle tips to for improved gas flow and lower sound generationCaliber specific bores for calibers ranging from .224-.338 calMultiple thread sizes available for each caliber configurationOptimized for commonly available PRS calibers such as the 6BR, 6mm Creedmoor and 6x47 Lapua (as well as their variants)Recessed target crown to reduce exit muzzle disturbance and protect secondary crown from damagePurpose designed, self timing lock nut that reduces run-out, increases holding strength and is designed for use with MTU contour muzzles Dimensions 78 mm (3.1") long* x 32 mm (1.25") wide x 28 mm (1.1") wideWeight: 0.44 lbs / 200.7 gMaterial: High Strength, Nitrided Steel
329.9 EUR 0 329,90 € *
Varastossa, toimitus Euroopasta 2-4 viikon kuluessa.
Ominaisuudet: Kaliiperi: 6.5mm Kierteet: 5/8-24 Materiaali: Nitrided Steel Väri: Green
Tuotenro: EU2009746
MDT - Comp Muzzle Brake - 4 Port - 5.56 + 6mm - 5/8-24 - GRN
Valmistajan tuotenumero: 106201-GRN 682157407651 The MDT [COMP BRAKE] was designed from the ground up by our sponsored shooter teams requirements, high tech mach flow gas simulations and countless hours of testing. This muzzle brake is the most effective brake currently available that also provides the least concussion to the shooter and spotter, by redirecting gas flow, allowing you to watch bullet flight and monitor hits and misses on target. Features 4 ports, strategically cut at varying angles to maximize recoil reduction as well as minimizing shooter concussionForward facing "disruptor" ports to better deflect gas away from the shooterTuneable upwards vented ports that can be open or closed with a slider mechanism for straighter rifle trackingSerrated baffle tips to for improved gas flow and lower sound generationCaliber specific bores for calibers ranging from .224-.338 calMultiple thread sizes available for each caliber configurationOptimized for commonly available PRS calibers such as the 6BR, 6mm Creedmoor and 6x47 Lapua (as well as their variants)Recessed target crown to reduce exit muzzle disturbance and protect secondary crown from damagePurpose designed, self timing lock nut that reduces run-out, increases holding strength and is designed for use with MTU contour muzzles Dimensions 78 mm (3.1") long* x 32 mm (1.25") wide x 28 mm (1.1") wideWeight: 0.44 lbs / 200.7 gMaterial: High Strength, Nitrided Steel
329.9 EUR 0 329,90 € *
Varastossa, toimitus Euroopasta 2-4 viikon kuluessa.
Ominaisuudet: Kaliiperi: 6mm Kierteet: 5/8-24 Materiaali: Nitrided Steel Väri: Green
Tuotenro: EU2009747
MDT - Comp Muzzle Brake - 4 Port - 5.56 + 6mm - 3/4-24 - GRN
Valmistajan tuotenumero: 107462-GRN 709951101780 The MDT [COMP BRAKE] was designed from the ground up by our sponsored shooter teams requirements, high tech mach flow gas simulations and countless hours of testing. This muzzle brake is the most effective brake currently available that also provides the least concussion to the shooter and spotter, by redirecting gas flow, allowing you to watch bullet flight and monitor hits and misses on target. Features 4 ports, strategically cut at varying angles to maximize recoil reduction as well as minimizing shooter concussion Forward facing "disruptor" ports to better deflect gas away from the shooter Tuneable upwards vented ports that can be open or closed with a slider mechanism for straighter rifle tracking Serrated baffle tips to for improved gas flow and lower sound generation Caliber specific bores for calibers ranging from .224-.338 cal Multiple thread sizes available for each caliber configuration Optimized for commonly available PRS calibers such as the 6BR, 6mm Creedmoor and 6x47 Lapua (as well as their variants) Recessed target crown to reduce exit muzzle disturbance and protect secondary crown from damage Purpose designed, self timing lock nut that reduces run-out, increases holding strength and is designed for use with MTU contour muzzles Dimensions 78 mm (3.1") long* x 32 mm (1.25") wide x 28 mm (1.1") wide Weight: 0.44 lbs / 200.7 g Material: High Strength, Nitrided Steel
329.9 EUR 0 329,90 € *
Varastossa, toimitus Euroopasta 2-4 viikon kuluessa.
Ominaisuudet: Kaliiperi: 6mm Kierteet: 3/4-24 Materiaali: Nitrided Steel Väri: Green
Tuotenro: EU2009748
MDT - Comp Muzzle Brake - 4 Port - 6.5mm - 3/4-24 - GRN
Valmistajan tuotenumero: 107463-GRN 682157407712 The MDT [COMP BRAKE] was designed from the ground up by our sponsored shooter teams requirements, high tech mach flow gas simulations and countless hours of testing. This muzzle brake is the most effective brake currently available that also provides the least concussion to the shooter and spotter, by redirecting gas flow, allowing you to watch bullet flight and monitor hits and misses on target. Features 4 ports, strategically cut at varying angles to maximize recoil reduction as well as minimizing shooter concussionForward facing "disruptor" ports to better deflect gas away from the shooterTuneable upwards vented ports that can be open or closed with a slider mechanism for straighter rifle trackingSerrated baffle tips to for improved gas flow and lower sound generationCaliber specific bores for calibers ranging from .224-.338 calMultiple thread sizes available for each caliber configurationOptimized for commonly available PRS calibers such as the 6BR, 6mm Creedmoor and 6x47 Lapua (as well as their variants)Recessed target crown to reduce exit muzzle disturbance and protect secondary crown from damagePurpose designed, self timing lock nut that reduces run-out, increases holding strength and is designed for use with MTU contour muzzles Dimensions 78 mm (3.1") long* x 32 mm (1.25") wide x 28 mm (1.1") wideWeight: 0.44 lbs / 200.7 gMaterial: High Strength, Nitrided Steel
329.9 EUR 0 329,90 € *
Varastossa, toimitus Euroopasta 2-4 viikon kuluessa.
Ominaisuudet: Kaliiperi: 6.5mm Kierteet: 3/4-24 Materiaali: Nitrided Steel Väri: Green
Tuotenro: EU2009749
MDT - Comp Muzzle Brake - 4 Port - .308 - 3/4-24 - GRN
Valmistajan tuotenumero: 107464-GRN 682157407750 The MDT [COMP BRAKE] was designed from the ground up by our sponsored shooter teams requirements, high tech mach flow gas simulations and countless hours of testing. This muzzle brake is the most effective brake currently available that also provides the least concussion to the shooter and spotter, by redirecting gas flow, allowing you to watch bullet flight and monitor hits and misses on target. Features 4 ports, strategically cut at varying angles to maximize recoil reduction as well as minimizing shooter concussionForward facing "disruptor" ports to better deflect gas away from the shooterTuneable upwards vented ports that can be open or closed with a slider mechanism for straighter rifle trackingSerrated baffle tips to for improved gas flow and lower sound generationCaliber specific bores for calibers ranging from .224-.338 calMultiple thread sizes available for each caliber configurationOptimized for commonly available PRS calibers such as the 6BR, 6mm Creedmoor and 6x47 Lapua (as well as their variants)Recessed target crown to reduce exit muzzle disturbance and protect secondary crown from damagePurpose designed, self timing lock nut that reduces run-out, increases holding strength and is designed for use with MTU contour muzzles Dimensions 78 mm (3.1") long* x 32 mm (1.25") wide x 28 mm (1.1") wideWeight: 0.44 lbs / 200.7 gMaterial: High Strength, Nitrided Steel
329.9 EUR 0 329,90 € *
Varastossa, toimitus Euroopasta 2-4 viikon kuluessa.
Ominaisuudet: Kaliiperi: 308 Caliber Kierteet: 3/4-24 Materiaali: Nitrided Steel Väri: Green
Tuotenro: EU2009750
MDT - Comp Muzzle Brake - 4 Port - .338 - 5/8-24 - GRN
Valmistajan tuotenumero: 106207-GRN 682157407774 The MDT [COMP BRAKE] was designed from the ground up by our sponsored shooter teams requirements, high tech mach flow gas simulations and countless hours of testing. This muzzle brake is the most effective brake currently available that also provides the least concussion to the shooter and spotter, by redirecting gas flow, allowing you to watch bullet flight and monitor hits and misses on target. Features 4 ports, strategically cut at varying angles to maximize recoil reduction as well as minimizing shooter concussionForward facing "disruptor" ports to better deflect gas away from the shooterTuneable upwards vented ports that can be open or closed with a slider mechanism for straighter rifle trackingSerrated baffle tips to for improved gas flow and lower sound generationCaliber specific bores for calibers ranging from .224-.338 calMultiple thread sizes available for each caliber configurationOptimized for commonly available PRS calibers such as the 6BR, 6mm Creedmoor and 6x47 Lapua (as well as their variants)Recessed target crown to reduce exit muzzle disturbance and protect secondary crown from damagePurpose designed, self timing lock nut that reduces run-out, increases holding strength and is designed for use with MTU contour muzzles Dimensions 78 mm (3.1") long* x 32 mm (1.25") wide x 28 mm (1.1") wideWeight: 0.44 lbs / 200.7 gMaterial: High Strength, Nitrided Steel
329.9 EUR 0 329,90 € *
Varastossa, toimitus Euroopasta 2-4 viikon kuluessa.
Ominaisuudet: Kaliiperi: 338 Caliber Kierteet: 5/8-24 Materiaali: Nitrided Steel Väri: Green
Tuotenro: EU2009751
MDT - Comp Muzzle Brake - 4 Port - .338 - 3/4-24 - GRN
Valmistajan tuotenumero: 107465-GRN 682157407798 The MDT [COMP BRAKE] was designed from the ground up by our sponsored shooter teams requirements, high tech mach flow gas simulations and countless hours of testing. This muzzle brake is the most effective brake currently available that also provides the least concussion to the shooter and spotter, by redirecting gas flow, allowing you to watch bullet flight and monitor hits and misses on target. Features 4 ports, strategically cut at varying angles to maximize recoil reduction as well as minimizing shooter concussionForward facing "disruptor" ports to better deflect gas away from the shooterTuneable upwards vented ports that can be open or closed with a slider mechanism for straighter rifle trackingSerrated baffle tips to for improved gas flow and lower sound generationCaliber specific bores for calibers ranging from .224-.338 calMultiple thread sizes available for each caliber configurationOptimized for commonly available PRS calibers such as the 6BR, 6mm Creedmoor and 6x47 Lapua (as well as their variants)Recessed target crown to reduce exit muzzle disturbance and protect secondary crown from damagePurpose designed, self timing lock nut that reduces run-out, increases holding strength and is designed for use with MTU contour muzzles Dimensions 78 mm (3.1") long* x 32 mm (1.25") wide x 28 mm (1.1") wideWeight: 0.44 lbs / 200.7 gMaterial: High Strength, Nitrided Steel
329.9 EUR 0 329,90 € *
Erikoistilaus Euroopan varastosta.
Ominaisuudet: Kaliiperi: 338 Caliber Kierteet: 3/4-24 Materiaali: Nitrided Steel Väri: Green
Varastossa. Varastossa, toimitusaika 2-4 viikkoa.
17,90 € * 16,90 € - 17,90 €*
Varastossa, toimitusaika 2-4 viikkoa. Varastossa, toimitusaika 2-4 viikkoa.
22,90 € *
Varastossa. Varastossa, toimitusaika 2-4 viikkoa.
289,90 € * 289,90 € - 329,90 €*
Uutiskirje