Brownells Finland - Laajin valikoima aseen osia, lippaita, ammuntatarvikkeita, asesepän työkaluja ja optiikkaa Suomi
793811764031 430105331
The Strike Industries GEN5 Magwell for GLOCK™ G19 was designed to provide easier reloading of the magazine while adding SI styling. With the added front lip of the magwell, this SI magwell gives improved grip support. Keeping to the slender factory design of the pistol grip, the benefit of adding a funnel-like magwell to help prevent the dreaded reload bobble outweighs the added material of this SI G5 Magwell. Add consistency and cut fractions of seconds off your reloads now with the Strike Industries GEN5 Magwell for GLOCK™ 19 while comfortably carrying your pistol on your hip or in your waistband. Compatible with most aftermarket magazine base plates and extensions and especially with the SI Extended Magazine Plate (EMP) for GLOCK™ G19. WARNING: DO NOT OVERTIGHTEN set screw when installing the magwell. Overtightening the set screw will throw the magwell alightment off and also damage the magwell and/or firearm. If you are unsure, please contact our customer support team or consult with your local gunsmith. Package Contents: x1 G5 G19 magwell x1 M4 set screw x1 2.5mm hex key Product Features: Flared magwell for easier magazine Insertion Improved grip support Ease of installation Lightweight High-strength polymer Perfect pairing with Strike EMP COMPATIBILITY: For GLOCK™ G19/G23 GEN5 w/ and w/o half moon cut Designed for the GLOCK™ factory +0 backstrap. Bigger GLOCK™ factory or aftermarket backstraps may need to be modified to possibly work at your own risk NOT COMPATIBLE: For GLOCK™ 19X DISCLAIMER: -This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols. --“GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks owned by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither Strike Industries Inc. nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. -CALIFORNIA PROPOSITION 65 WARNING:- WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information: www.P65Warnings.ca.gov
32.9 32.9 1 EUR
New
Tuotenro: 430105331
STRIKE INDUSTRIES MAGWELL FOR GLOCK G19/23 GEN 5
Valmistajan tuotenumero: SI-G5-MAGWELL-1 793811764031
32.9 EUR 0 32,90 € *
Jälkitilaus, toimitusaika n. 4-12 viikkoa USA:n varastosta.
Ominaisuudet: Malli: 19, 23, Gen 5 Merkki: Glock Viimeistely: Black

Ominaisuudet

Malli: Gen 5,19,23 Valmistaja: Glock Viimeistely: Black Toimituksen paino: 0,023kg Toimituksen korkeus: 95mm Toimituksen leveys: 38mm Toimituksen pituus: 32mm

Tuotekuvaus

USA:n vientiluvan tyyppi: 0A501.y.1



The Strike Industries GEN5 Magwell for GLOCK™ G19 was designed to provide easier reloading of the magazine while adding SI styling. With the added front lip of the magwell, this SI magwell gives improved grip support. Keeping to the slender factory design of the pistol grip, the benefit of adding a funnel-like magwell to help prevent the dreaded reload bobble outweighs the added material of this SI G5 Magwell. Add consistency and cut fractions of seconds off your reloads now with the Strike Industries GEN5 Magwell for GLOCK™ 19 while comfortably carrying your pistol on your hip or in your waistband. Compatible with most aftermarket magazine base plates and extensions and especially with the SI Extended Magazine Plate (EMP) for GLOCK™ G19. WARNING: DO NOT OVERTIGHTEN set screw when installing the magwell. Overtightening the set screw will throw the magwell alightment off and also damage the magwell and/or firearm. If you are unsure, please contact our customer support team or consult with your local gunsmith. Package Contents: x1 G5 G19 magwell x1 M4 set screw x1 2.5mm hex key Product Features: Flared magwell for easier magazine Insertion Improved grip support Ease of installation Lightweight High-strength polymer Perfect pairing with Strike EMP COMPATIBILITY: For GLOCK™ G19/G23 GEN5 w/ and w/o half moon cut Designed for the GLOCK™ factory +0 backstrap. Bigger GLOCK™ factory or aftermarket backstraps may need to be modified to possibly work at your own risk NOT COMPATIBLE: For GLOCK™ 19X DISCLAIMER: -This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols. --“GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks owned by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither Strike Industries Inc. nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. -CALIFORNIA PROPOSITION 65 WARNING:- WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information: www.P65Warnings.ca.gov
Uutiskirje