Material: 7075 Aluminum Coating: Matte Black Hardcoat Overall Length: 1.780" Overall Width: 1.1" Mounting Hardware: (2) 6-32 Flat Head Screws, (1) 6-32 X 3/16 Set Screw Red Dot Fitment: Trijicon RMR, Holosun HS507C This mounts fits: Baby Desert Eagle (Post 2006) EAA Witness Elite Match This mount does not fit: Rock Island 1911s Simply remove the rear sight on your gun and replace it with our mount in order to mount your Trijicon RMR red dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs 2 Flat Head Cap Screws - Provided for Trijicon RMR The screws that are included with this mount require a 5/64'' allen wrench for installation.
KIMBER Adjustable Rear Sight Trijicon RMR Sight Mount - Täydellinen lisävaruste!
Tervetuloa Brownells Suomeen! Esittelemme ylpeänä KIMBER Adjustable Rear Sight Trijicon RMR Sight Mountin, joka on suunniteltu erityisesti tarkkuusampujille ja metsästäjille. Tämä mount on valmistettu korkealaatuisesta 7075 alumiinista ja se tarjoaa erinomaisen kestävyyden ja luotettavuuden.
Tuotteen tiedot:
- Materiaalit: 7075 Alumiini
- Päällyste: Matte Black Hardcoat
- Kokonaispituus: 1.780"
- Kokonaisleveys: 1.1"
- Asennusmateriaalit: (2) 6-32 Flat Head Screws, (1) 6-32 X 3/16 Set Screw
- Red Dot -soveltuvuus: Trijicon RMR, Holosun HS507C
Yhteensopivuus:
Tämä mount sopii seuraaville aseille:
- Baby Desert Eagle (Post 2006)
- EAA Witness Elite Match
Huomioithan, että tämä mount ei sovi Rock Island 1911 -aseisiin.
Asennusohjeet:
- Poista takasuunta*.
- Asenna EGW Sight Mount kiskoon.
- Kiristä set screw (jos sovellettavissa).
- Aseta red dot -käsite EGW Sight Mountille (pienellä paperinpalan käytöllä red dotin ja mountin välillä helpotat irrotusta ja pidät Loctiten pois red dotista).
- Käytä sinistä Loctitea mukana toimitetuissa asennusruuveissa.
- Kiristä asennusruuvit 15in/lbs.
2 Flat Head Cap Screws - toimitetaan Trijicon RMR:lle. Ruuvit, jotka sisältyvät tähän mountiin, vaativat 5/64'' allen avaimen asennusta varten.