Brownells Finland - Laajin valikoima aseen osia, lippaita, ammuntatarvikkeita, asesepän työkaluja ja optiikkaa Suomi
810132050008 430109366
This 10/22 accessory is a must have! An inexpensive quick to install upgrade. A great addition if you want less battering, vibration, and recoil noise. Not recommended for use with magnum receivers.   FEATURES: Aftermarket replacement for the 10/22 bolt stop Steel core with padded tubing cover Eliminate “bolt battering” of the receiver Dampen cycling vibration Installation Instructions:   First install the tubing beginning from the inside center of the receiver and pushing it out through the right and left side. (If you attempt to thread the tubing from the outside left or right it’s more difficult) Second from the outside of the receiver thread/push the dowel pin through the tubing. Note, the cocking handle and bolt will need to be installed prior to the KIDD bolt buffer.   Packaging Includes: One KIDD Bolt Buffer
18.9 18.9 1 EUR
New
Tuotenro: 430109366
KIDD INNOVATIVE DESIGN BOLT BUFFER FOR RUGER 10/22 LR
Valmistajan tuotenumero: KIDD-22BOLTBUF 810132050008
18.9 EUR 0 18,90 € *
Ilmoita saatavuudesta
Loppu varastosta. Saatavuus ei tiedossa.
Ominaisuudet: Malli: 10/22, BRN-22 Merkki: Ruger, Brownells

Ominaisuudet

Malli: BRN-22,10/22 Valmistaja: Brownells,Ruger Toimituksen paino: 0,003kg Toimituksen leveys: 64mm Toimituksen pituus: 102mm

Tuotekuvaus

Made in USA
USA:n vientiluvan tyyppi: 0A501.x



🔧 Paranna Ruger 10/22 -aseesi suorituskykyä KIDD Innovative Design Bolt Bufferilla. Vähennä rekyyliä ja melua. Sopii 10/22 ja BRN-22 malleihin. Tutustu nyt! 🔫

This 10/22 accessory is a must have! An inexpensive quick to install upgrade. A great addition if you want less battering, vibration, and recoil noise. Not recommended for use with magnum receivers.   FEATURES: Aftermarket replacement for the 10/22 bolt stop Steel core with padded tubing cover Eliminate “bolt battering” of the receiver Dampen cycling vibration Installation Instructions:   First install the tubing beginning from the inside center of the receiver and pushing it out through the right and left side. (If you attempt to thread the tubing from the outside left or right it’s more difficult) Second from the outside of the receiver thread/push the dowel pin through the tubing. Note, the cocking handle and bolt will need to be installed prior to the KIDD bolt buffer.   Packaging Includes: One KIDD Bolt Buffer