Material: 7075 Aluminum Coating: Matte Black Hardcoat Overall Length: 1.780" Overall Width: 1.1" Mounting Hardware: (2) 6-32 Flat Head Screws, (1) 6-32 X 3/16 Set Screw Red Dot Fitment: Trijicon RMR, Holosun HS507C This mounts fits: Baby Desert Eagle (Post 2006) EAA Witness Elite Match This mount does not fit: Rock Island 1911s Simply remove the rear sight on your gun and replace it with our mount in order to mount your Trijicon RMR red dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs 2 Flat Head Cap Screws - Provided for Trijicon RMR The screws that are included with this mount require a 5/64'' allen wrench for installation.
Esittely: EGW IVER JOHNSON 1911 TRIJICON RMR -kiinnike
Tämä EGW:n valmistama kiinnike on suunniteltu erityisesti IVER JOHNSON 1911 -pistoolille, ja se mahdollistaa Trijicon RMR -punapisteen helpon asennuksen.
Tuotteen tiedot:
- Materiaali: 7075 Alumiini
- Päällyste: Matte Black Hardcoat
- Kokonaispituus: 1.780"
- Kokonaisleveys: 1.1"
- Asennusvälineet: (2) 6-32 Flat Head Screws, (1) 6-32 X 3/16 Set Screw
- Punapisteen yhteensopivuus: Trijicon RMR, Holosun HS507C
Yhteensopivuus:
Sopii:
- Baby Desert Eagle (Post 2006)
- EAA Witness Elite Match
Ei sovi:
Asennusohjeet:
- Poista takasivun kiinnitys*
- Asenna EGW Sight Mount urakouruun
- Tiukkaa set screw (tarvittaessa)
- Aseta punapiste EGW Sight Mountiin (pienen paperipalan laittaminen punapisteen ja kiinnityksen väliin helpottaa poistamista ja pitää Loctiten pois punapisteestä).
- Käytä sinistä Loctitea mukana tuleville asennusruuveille
- Tiukkaa asennusruuvit 15in/lbs
2 Flat Head Cap Screws - Mukana Trijicon RMR:lle. Kiinnityksessä käytettävät ruuvit vaativat 5/64'' allen-avaimen asennusta varten.