Strike Industries is proud to introduce a revolutionary new product The Universal (Optics) Mount for Glock. It has the lowest height-over-bore mount in the industry without the hassle of cutting your slide or cost of buying an aftermarket slide! We have put many hours and 1000's of rounds down range with most of the more popular red dot optics on the market with no problems whatsoever! This includes the Burris* Fast* Fire* II & III, Leupold* Delta Point* reflex sights, Docters* II & III, EoTech* MRDS*, Trijicon* RMR,* Vortex Venom and Viper, and many others. The mount itself is secured to the slide via the dove tail with 6 set screws. Two in the dovetail cut and one forward and aft of the dovetail and two more to prevent any shift. This provides a steady, sturdy and rugged mount that will repeatedly hold zero. Other mounting hardware included is 6mm, 8mm and 10mm screws (two of each) that are used to fit and secure most of the popular optics out there. (Depending on what optic you have you will need to find the screws that correlates with your particular optic. There are two special screws for Trijicon RMR. Once you secured the GUM to your slide and found the correct post ( two sets of reinforcing post included) for your optic, go ahead and mount your optic on the post and use the final two longer securing screws to secure your optic to the GUM. Disclaimer- You may mark your slide when using this mount to properly secure the mount. It is highly suggested that you have a gunsmith install the GUM and utilize the correct tools for installation. Leupold Delta Point* can be mounted but not with reinforced posts to secure 100%
Uuden sukupolven optiikkakiinnike Glockille!
Strike Industries on ylpeä esitellessään vallankumouksellisen tuotteen: Universal (Optics) Mount Glockille. Tämä kiinnike on alan matalin height-over-bore -kiinnike ilman vaivannäköä liukusiivestä leikkaamisessa tai jälkimarkkinoilta ostettavan liukusiiven kustannuksissa!
Olemme käyttäneet lukuisia tunteja ja tuhansia laukauksia eri suosituimmilla punapisteoptikoilla markkinoilla ilman mitään ongelmia! Näitä ovat muun muassa:
- Burris Fast Fire II & III
- Leupold Delta Point -refleksisiteet
- Docters II & III
- EoTech MRDS
- Trijicon RMR
- Vortex Venom ja Viper
- ja monia muita.
Kiinnike itsessään on kiinnitetty liukusiiveen dovaileilla 6 ruuvilla: kaksi dovaileissa, yksi eteen ja taakse sekä kaksi lisää estämään siirtymistä. Tämä tarjoaa vakaan, tukevan ja kestävän kiinnityksen, joka pitää nollauksen toistuvasti. Muita mukana tulevia kiinnitystarvikkeita ovat 6mm, 8mm ja 10mm ruuvit (kaksi kutakin), joita käytetään useimpien suosittujen optikoiden kiinnittämiseen. (Riippuen optikasta, sinun on löydettävä ruuvit, jotka vastaavat omaa optikasi. Trijicon RMR:lle on kaksi erityistä ruuvia.)
Kun olet kiinnittänyt GUMin liukusiiveesi ja löytänyt oikeat tukipilarit (mukana kaksi sarjaa vahvistustukia) optikallesi, asenna optikka tukipilarille ja käytä kahta pidempää kiinnitysruuvia optikan kiinnittämiseksi GUM:iin.
Huomautus: Saatat merkitä liukusiiveäsi tämän kiinnikkeen käytön aikana. On vahvasti suositeltavaa, että ammattilaisasekorjaaja asentaa GUMin ja käyttää oikeita työkaluja asennuksessa. Leupold Delta Point voidaan asentaa, mutta ei vahvistettujen tukien kanssa varmistaakseen 100% turvallisuuden.