Brownells Finland - Laajin valikoima aseen osia, lippaita, ammuntatarvikkeita, asesepän työkaluja ja optiikkaa Suomi

FIX IT STICKS
FRONT SIGHT BIT & PIN PUNCH COMBO PACK FOR GLOCK®

898207002176 100027823
Fast, Easy, Painless Disassembly/Reassembly of Your Glock
The Glock® pistol travels light, both in the number of parts that comprise it and in the number of tools needed to disassemble it for basic maintenance. Actually, it requires only two tools and the Fix-It Sticks Glock tool kit contains them. Half of the Fix-It Sticks Glock® took kit’s dynamic duo is a 3/32" pin punch for removing the all the pins that hold the pistol together, including those that retain the pistol’s fire control mechanism in its polymer frame. The Duo’s other half is a 3/16" in thin-walled hex nut driver for removing the screw that anchors the Glock’s front sight. An magnet inside the hex driver handily retains the screw so you don’t lose it. Hardened tool steel Black oxide finish Fits any Fix-It Stick driver, Brownells Magna-Tip® or standard 1/4" hex bit driver Both tools are machined from hardened steel barstock - none of this cheap front-of-the-hardware store stuff that breaks as soon as you apply a little torque!  They are compatible with any Fix-It-Sticks handles AND any standard 1/4" bit driver - so, yes, they’ll fit your Magna-Tip® driver handles! Or pair them up with the basic Fix-It Sticks T-handle tool (#100-018-238, sold separately).
35.9 35.9 1 EUR
Tuotenro: 100027823
FIX IT STICKS FRONT SIGHT BIT & PIN PUNCH COMBO PACK FOR GLOCK®
Valmistajan tuotenumero: FISGLCP 898207002176 Glock®-pistooli on kevytrakenteinen, niin osien määrässä kuin tarvittavien työkalujen määrässäkin perushuoltoa varten. Itse asiassa tarvitaan vain kaksi työkalua ja Fix-It Sticksin Glock-työkalusarja sisältää ne. Sarjan toinen puoli on 3/32" tapinpoistotyökalu, jolla irrotetaan kaikki pistoolin osia yhteen pitävät tapit, mukaan lukien ne, jotka pitävät pistoolin tulenjohtomekanismin sen polymeerirungossa. Duon toinen puoli on 3/16" ohutseinämäinen kuusiokolokkoavain Glockin etutähtäimen ruuvin irrottamiseen. Kuusiokolokkoavaimen sisällä oleva magneetti pitää ruuvin tallessa, jotta et menetä sitä. Karkaistua työkaluterästä Musta oksidipinnoite Sopii mihin tahansa Fix-It Stick -vääntimeen, Brownells Magna-Tip®:iin tai standardiin 1/4" kuusikulmaisen bitin vääntimeen Molemmat työkalut on koneistettu karkaistusta terästangosta - ei mitään halpaa rautakaupan etuhyllyn tavaraa, joka katkeaa heti, kun siihen kohdistetaan vähänkin momenttia! Ne ovat yhteensopivia minkä tahansa Fix-It-Sticks kahvojen KANSSA JA minkä tahansa standardin 1/4" bitin vääntimen kanssa - joten kyllä, ne sopivat myös Magna-Tip® -kahvoihisi! Tai yhdistä ne perus Fix-It Sticks T-kahva työkaluun (#100-018-238, myydään erikseen).
35.9 EUR 78 35,90 € *
Toimitusaika noin 2-4 viikkoa.
Yli 10 kpl. USA:n varastossa
Ominaisuudet: Merkki: Glock

Ominaisuudet

Valmistaja: Glock Toimituksen paino: 0,031kg Toimituksen korkeus: 127mm Toimituksen leveys: 89mm Toimituksen pituus: 127mm




Fast, Easy, Painless Disassembly/Reassembly of Your Glock
The Glock® pistol travels light, both in the number of parts that comprise it and in the number of tools needed to disassemble it for basic maintenance. Actually, it requires only two tools and the Fix-It Sticks Glock tool kit contains them. Half of the Fix-It Sticks Glock® took kit’s dynamic duo is a 3/32" pin punch for removing the all the pins that hold the pistol together, including those that retain the pistol’s fire control mechanism in its polymer frame. The Duo’s other half is a 3/16" in thin-walled hex nut driver for removing the screw that anchors the Glock’s front sight. An magnet inside the hex driver handily retains the screw so you don’t lose it. Hardened tool steel Black oxide finish Fits any Fix-It Stick driver, Brownells Magna-Tip® or standard 1/4" hex bit driver Both tools are machined from hardened steel barstock - none of this cheap front-of-the-hardware store stuff that breaks as soon as you apply a little torque!  They are compatible with any Fix-It-Sticks handles AND any standard 1/4" bit driver - so, yes, they’ll fit your Magna-Tip® driver handles! Or pair them up with the basic Fix-It Sticks T-handle tool (#100-018-238, sold separately).
Uutiskirje