Brownells Finland - Laajin valikoima aseen osia, lippaita, ammuntatarvikkeita, asesepän työkaluja ja optiikkaa Suomi
274100651
These DS Arms FAL/SA58 MLOK handguards were engineered for easy installation and to provide a durable, secure and modular mounting platform for a variety of accessories and components. This handguard utilizes a cross bolt system and 2 heat-treated steel retaining blocks (supplied) and your existing handguard cap for attachment. Featuring a 1913 Spec. Picatinny Rail at the 12 O'clock position, this handguard will line up perfectly with the DS Arms Extreme Duty Extended Scope Mount for a continuous Picatinny top rail on your rifle. Paying homage to the traditional FAL handguards, the DS Arms M-LOK handguard features 3 oval vent holes on either side of the handguard. These vent holes along with the slim clean profile of the handguards allows you to have a modern attachment system without sacrificing the iconic look of the FAL rifle. The lower section of the handguard is designed to vent the heat of the barrel thru the uncovered machined slots. It is also designed to be further away from the barrel in order to reduce the felt effects of heat for a greater amount of time, unlike other models currently on the market. This product is proudly engineered and manufactured in the USA.
274.9 274.9 1 EUR
Tuotenro: 274100651
D.S. ARMS FAL METRIC FULL LENGTH GAS SYSTEM MLOK HANDGUARD
Valmistajan tuotenumero: 021FASMLA Nämä DS Arms FAL/SA58 MLOK -kädensijat on suunniteltu helpottamaan asennusta ja tarjoamaan kestävän, turvallisen ja modulaarisen kiinnitysalustan erilaisille varusteille ja komponenteille. Tämä kädensija käyttää ristipulttijärjestelmää ja kahta karkaistua terästä valmistettua kiinnityslohkoa (mukana toimitettuna) sekä olemassa olevaa kädensijan kantta kiinnitykseen. Kädensijassa on 1913 Spec. Picatinny-kisko 12 asteen kohdalla, joka asettuu täydellisesti linjaan DS Armsin Extreme Duty Extended Scope Mount -kiikarinkiinnitystelineen kanssa, jolloin aseeseesi muodostuu jatkuva Picatinny-kisko. Kunnioittaen perinteisiä FAL-kädensijoja, DS Armsin M-LOK -kädensija sisältää kolme ovaalinmuotoista ilmanvaihtoaukkoa kummallakin puolella kädensijaa. Nämä ilmanvaihtoaukot yhdessä kädensijan sirojen ja selkeiden profiilien kanssa mahdollistavat modernin kiinnitysjärjestelmän käytön tinkimättä FAL-aseen ikonisesta ulkonäöstä. Kädensijan alaosa on suunniteltu johtamaan piipun lämpöä pois koneistettujen aukkojen kautta. Se on myös suunniteltu olemaan kauempana piipusta, jotta käyttäjä ei tuntisi lämpöä yhtä nopeasti kuin muissa markkinoilla olevissa malleissa. Tämä tuote on ylpeästi suunniteltu ja valmistettu Yhdysvalloissa.
274.9 EUR 0 274,90 € *
Ei saatavilla.
Ominaisuudet: Malli: FAL Materiaali: Aluminum Merkki: FN Pituus: 11.75 Tyyppi: M-LOK Väri: Black

Ominaisuudet

Malli: FAL Materiaali: Aluminum Pituus: 11.75 Tyyppi: M-LOK Valmistaja: FN Väri: Black Toimituksen paino: 0,513kg Toimituksen korkeus: 89mm Toimituksen leveys: 114mm Toimituksen pituus: 330mm

Tuotekuvaus

Made in USA
USA:n vientiluvan tyyppi: 0A501.y.1



These DS Arms FAL/SA58 MLOK handguards were engineered for easy installation and to provide a durable, secure and modular mounting platform for a variety of accessories and components. This handguard utilizes a cross bolt system and 2 heat-treated steel retaining blocks (supplied) and your existing handguard cap for attachment. Featuring a 1913 Spec. Picatinny Rail at the 12 O'clock position, this handguard will line up perfectly with the DS Arms Extreme Duty Extended Scope Mount for a continuous Picatinny top rail on your rifle. Paying homage to the traditional FAL handguards, the DS Arms M-LOK handguard features 3 oval vent holes on either side of the handguard. These vent holes along with the slim clean profile of the handguards allows you to have a modern attachment system without sacrificing the iconic look of the FAL rifle. The lower section of the handguard is designed to vent the heat of the barrel thru the uncovered machined slots. It is also designed to be further away from the barrel in order to reduce the felt effects of heat for a greater amount of time, unlike other models currently on the market. This product is proudly engineered and manufactured in the USA.
Uutiskirje