Brownells Finland - Laajin valikoima aseen osia, lippaita, ammuntatarvikkeita, asesepän työkaluja ja optiikkaa Suomi

EGW
TAURUS G2, PT709, TX22 TRIJICON RMR SIGHT MOUNT

841370117550 296000710
Simply remove the rear sight on your gun and replace it with EGW mount in order to mount your Trijicon RMR red-dot sight. You can take the mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs The screws that are included with this mount require a 5/64'' allen wrench for installation.
84.9 84.9 1 EUR
Tuotenro: 296000710
EGW TAURUS G2, PT709, TX22 TRIJICON RMR SIGHT MOUNT
Valmistajan tuotenumero: 49541 841370117550 Poista vain aseen taka-ähtäin ja korvaa se EGW:n kiinnikkeellä, jotta voit asentaa Trijicon RMR -punapistetähtäimen. Voit milloin tahansa ottaa kiinnikkeen pois ja asentaa taka-ähtäimen takaisin. Kiinnitystarvikkeet sisältyvät pakkaukseen. Asennusohjeet: Poista taka-ähtäin* Asenna EGW:n Tähtäinkiinnike irtotähtäimen paikalle Kiristä asetuspultti (jos sovellettavissa) Aseta punapistetähtäin EGW:n Tähtäinkiinnikkeelle (punapistetähtäimen ja kiinnikkeen väliin asetettu pieni paperipala helpottaa poistoa ja pitää Loctiten poissa punapistetähtäimestä.) Levitä sinistä Loctitea mukana tuleviin kiinnitysruuveihin Kiristä kiinnitysruuvit momenttiin 15in/lbs Mukana tulevat ruuvit vaativat 5/64 tuuman kuusiokoloavaimen asennukseen.
84.9 EUR 1 84,90 € *
Toimitusaika noin 2-4 viikkoa.
1 kpl. USA:n varastossa
Ominaisuudet: Jalustojen lukumäärä: 1-Piece Malli: PT-111, G2C, TX22, PT-740, PT-709, PT-140 G2, G2S Materiaali: Aluminum Merkki: Taurus Tyyppi: Tactical Väri: Black

Ominaisuudet

Jalustojen lukumäärä: 1-Piece Malli: G2C,PT-709,PT-140 G2,PT-111,TX22,G2S,PT-740 Materiaali: Aluminum Tyyli: Tactical Valmistaja: Taurus Väri: Black Toimituksen paino: 0,045kg Toimituksen korkeus: 25mm Toimituksen leveys: 76mm Toimituksen pituus: 140mm

Tuotekuvaus

Made in USA



Simply remove the rear sight on your gun and replace it with EGW mount in order to mount your Trijicon RMR red-dot sight. You can take the mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs The screws that are included with this mount require a 5/64'' allen wrench for installation.
Uutiskirje