Brownells Finland - Laajin valikoima aseen osia, lippaita, ammuntatarvikkeita, asesepän työkaluja ja optiikkaa Suomi

EGW
LPA SIGHT VORTEX VIPER/VENOM SIGHT MOUNT

841370112913 296000664
EGW red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install. Simply remove the rear sight on your gun and replace it with EGW mount in order to mount your Vortex Viper/Venom, Burris FastFire, or Docter red-dot sight. You can take the mount off and replace your rear sight at any time. Mounting hardware included. Minor modification may be neccessary for Rock Islands. EGW products should be installed and checked by a qualified and competent gunsmith. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs 2 Button Head Cap Screws - Provided for Vortex Viper and Venom Sights 2 Flat Head Cap Screws - Provided for Burris FastFire and Docter Sights The screws that are included with this mount require a 5/64'' allen wrench for installation. Modification of your firearm may nullify the manufacturer's warranty. This product should be installed and checked by a qualified gunsmith. No liability is expressed or implied for damage or injury which may result from improper installation or use of this product. This mount fits (including but not limited to): Sig Sauer 1911 Stainless Super Target* Sig Sauer 1911 Match Elite* Sig Sauer 1911 Target Full Size* Sig Sauer 1911 Max Full Size* STI with adjustable rear sights STI Trojan STI DVC 3 Gun STI DVC Limited STI DVC Classic Springfield Range Officer Springfield Range Officer Elite Target Springfield Loaded Target Rock Island TCM Rock Target FS HC Combo 22TCM / 9MM Rock Island Pro Match ULtra 5” - 45 ACP Rock Island Pro Match Tac Ultra 6” - 45 ACP Rock Island Pro Match Ultra HC - 40S&W Rock Island Pro Match Ultra 6” - 10MM Rock Island Pro Match ULtra 6” HC - 10MM Iver Johnson Eagle XL-SS10 Iver Johnson Eagle SS-10 Iver Johnson Eagle O.D. Green Iver Johnson Eagle Coyote Tan Iver Johnson Eagle XL-10 Ported Iver Johnson Eagle XL-10 Iver Johnson Eagle XL-45 Ported Iver Johnson Eagle XL-45acp Iver Johnson Eagle LR
84.9 84.9 1 EUR
Tuotenro: 296000664
EGW LPA SIGHT MOUNT FOR VORTEX VIPER/VENOM FITS 1911 BLACK
Valmistajan tuotenumero: 49317 841370112913 EGW:n punapistetähtäimet on tarkoitettu asennettavaksi vasemmalta oikealle (kun aseen suuaukko osoittaa eteenpäin). Kisko kapenee edestä taakse, jotta asennus olisi helpompaa. Poista vain aseen takatähtäin ja korvaa se EGW:n kiinnikkeellä, jotta voit asentaa Vortex Viper/Venom, Burris FastFire tai Docter -punapistetähtäimen. Voit milloin tahansa ottaa kiinnikkeen pois ja palauttaa takatähtäimen paikoilleen. Asennustarvikkeet sisältyvät pakettiin. Rock Island -malleihin saattaa tarvita pieniä muutoksia. EGW:n tuotteet tulisi asentaa ja tarkistaa pätevän ja osaavan asesepän toimesta. Asennusohjeet: Poista takatähtäin* Asenna EGW:n tähtäinkiinnike kiskoon Kiristä asetuspultti (jos sovellettavissa) Aseta punapistetähtäin EGW:n tähtäinkiinnikkeelle (punapistetähtäimen ja kiinnikkeen väliin asetettu pieni paperinpala helpottaa irrottamista ja estää Loctiten joutumisen punapistetähtäimeen.) Levitä sinistä Loctitea mukana tuleviin asennuspultteihin Kiristä asennuspultit 15 tuumapuntaan 2 kantaan upotettua pulttia - Mukana Vortex Viper- ja Venom-tähtäimille 2 tasapäistä pulttia - Mukana Burris FastFire- ja Docter-tähtäimille Mukana toimitettavat pultit vaativat 5/64 tuuman kuusiokoloavaimen asennukseen. Aseen muuttaminen voi mitätöidä valmistajan takuun. Tämän tuotteen tulisi asentaa ja tarkistaa pätevä aseseppä. Emme ota vastuuta vahingoista tai loukkaantumisista, jotka voivat aiheutua tämän tuotteen väärästä asennuksesta tai käytöstä. Tämä kiinnike sopii (mukaan lukien, mutta ei rajoittuen): Sig Sauer 1911 Stainless Super Target* Sig Sauer 1911 Match Elite* Sig Sauer 1911 Target Full Size* Sig Sauer 1911 Max Full Size* STI säädettävillä takatähtäimillä STI Trojan STI DVC 3 Gun STI DVC Limited STI DVC Classic Springfield Range Officer Springfield Range Officer Elite Target Springfield Loaded Target Rock Island TCM Rock Target FS HC Combo 22TCM / 9MM Rock Island Pro Match ULtra 5” - 45 ACP Rock Island Pro Match Tac Ultra 6” - 45 ACP Rock Island Pro Match Ultra HC - 40S&W Rock Island Pro Match Ultra 6” - 10MM Rock Island Pro Match ULtra 6” HC - 10MM Iver Johnson Eagle XL-SS10 Iver Johnson Eagle SS-10 Iver Johnson Eagle O.D. Green Iver Johnson Eagle Coyote Tan Iver Johnson Eagle XL-10 Ported Iver Johnson Eagle XL-10 Iver Johnson Eagle XL-45 Ported Iver Johnson Eagle XL-45acp Iver Johnson Eagle LR
84.9 EUR 7 84,90 € *
Toimitusaika noin 2-4 viikkoa.
7 kpl. USA:n varastossa
Ominaisuudet: Jalustojen lukumäärä: 1-Piece Materiaali: Aluminum Merkki: Sig Sauer, Springfield, STI, Iver Johnson, Rock Island Tyyppi: Tactical Väri: Black

Ominaisuudet

Jalustojen lukumäärä: 1-Piece Materiaali: Aluminum Tyyli: Tactical Valmistaja: STI,Springfield,Rock Island,Sig Sauer,Iver Johnson Väri: Black Toimituksen paino: 0,045kg Toimituksen korkeus: 25mm Toimituksen leveys: 76mm Toimituksen pituus: 140mm

Tuotekuvaus

Made in USA



EGW red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install. Simply remove the rear sight on your gun and replace it with EGW mount in order to mount your Vortex Viper/Venom, Burris FastFire, or Docter red-dot sight. You can take the mount off and replace your rear sight at any time. Mounting hardware included. Minor modification may be neccessary for Rock Islands. EGW products should be installed and checked by a qualified and competent gunsmith. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs 2 Button Head Cap Screws - Provided for Vortex Viper and Venom Sights 2 Flat Head Cap Screws - Provided for Burris FastFire and Docter Sights The screws that are included with this mount require a 5/64'' allen wrench for installation. Modification of your firearm may nullify the manufacturer's warranty. This product should be installed and checked by a qualified gunsmith. No liability is expressed or implied for damage or injury which may result from improper installation or use of this product. This mount fits (including but not limited to): Sig Sauer 1911 Stainless Super Target* Sig Sauer 1911 Match Elite* Sig Sauer 1911 Target Full Size* Sig Sauer 1911 Max Full Size* STI with adjustable rear sights STI Trojan STI DVC 3 Gun STI DVC Limited STI DVC Classic Springfield Range Officer Springfield Range Officer Elite Target Springfield Loaded Target Rock Island TCM Rock Target FS HC Combo 22TCM / 9MM Rock Island Pro Match ULtra 5” - 45 ACP Rock Island Pro Match Tac Ultra 6” - 45 ACP Rock Island Pro Match Ultra HC - 40S&W Rock Island Pro Match Ultra 6” - 10MM Rock Island Pro Match ULtra 6” HC - 10MM Iver Johnson Eagle XL-SS10 Iver Johnson Eagle SS-10 Iver Johnson Eagle O.D. Green Iver Johnson Eagle Coyote Tan Iver Johnson Eagle XL-10 Ported Iver Johnson Eagle XL-10 Iver Johnson Eagle XL-45 Ported Iver Johnson Eagle XL-45acp Iver Johnson Eagle LR
Uutiskirje