Brownells Finland - Laajin valikoima aseen osia, lippaita, ammuntatarvikkeita, asesepän työkaluja ja optiikkaa Suomi

EGW
KIMBER 1911 ADJUSTABLE SIGHT VORTEX RAZOR SIGHT MOUNT

841370112999 296000689
Simply remove the rear sight on your gun and replace it with EGW mount in order to mount your Vortex Razor, C-More RTS or STS red-dot sight. You can take the mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs The screws that are included with this mount require a 5/64'' allen wrench for installation. This mount fits: Kimber 1911 (adjustable rear sights for windage and elevation) Ruger SR1911 (adjustable rear sights for windage and elevation)
84.9 84.9 1 EUR
Tuotenro: 296000689
EGW KIMBER 1911 ADJUSTABLE SIGHT VORTEX RAZOR SIGHT MOUNT
Valmistajan tuotenumero: 49436 841370112999 Poista vain aseen takatähtäin ja korvaa se EGW:n kiinnikkeellä, jotta voit asentaa Vortex Razor, C-More RTS tai STS punapistetähtäimen. Voit milloin tahansa ottaa kiinnikkeen pois ja vaihtaa takatähtäimen takaisin. Kiinnitystarvikkeet sisältyvät pakkaukseen. Asennusohjeet: Poista takatähtäin* Asenna EGW:n tähtäinkiinnike jyväuraan Kiristä asetuspultti (jos sovellettavissa) Aseta punapistetähtäin EGW:n tähtäinkiinnikkeelle (punapistetähtäimen ja tähtäinkiinnikkeen väliin laitettu pieni paperinpala helpottaa irrottamista ja pitää Loctiten poissa punapistetähtäimestä.) Levitä sinistä Loctite-liimaa mukana tuleviin kiinnitysruuveihin Kiristä kiinnitysruuvit 15 tuumanaulapainoon Mukana tulevien ruuvien asentamiseen tarvitaan 5/64 tuuman kuusiokoloavain. Tämä kiinnike sopii: Kimber 1911 (säädettävät takatähtäimet tuulennopeuden ja korkeuden mukaan) Ruger SR1911 (säädettävät takatähtäimet tuulennopeuden ja korkeuden mukaan)
84.9 EUR 0 84,90 € *
Ei saatavilla.
Ominaisuudet: Jalustojen lukumäärä: 1-Piece Malli: 1911, SR1911 Materiaali: Aluminum Merkki: Ruger, Kimber Tyyppi: Tactical Väri: Black

Ominaisuudet

Jalustojen lukumäärä: 1-Piece Malli: SR1911,1911 Materiaali: Aluminum Tyyli: Tactical Valmistaja: Ruger,Kimber Väri: Black Toimituksen paino: 0,045kg Toimituksen korkeus: 25mm Toimituksen leveys: 76mm Toimituksen pituus: 140mm

Tuotekuvaus

Made in USA



Simply remove the rear sight on your gun and replace it with EGW mount in order to mount your Vortex Razor, C-More RTS or STS red-dot sight. You can take the mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs The screws that are included with this mount require a 5/64'' allen wrench for installation. This mount fits: Kimber 1911 (adjustable rear sights for windage and elevation) Ruger SR1911 (adjustable rear sights for windage and elevation)
Uutiskirje