Brownells Finland - Laajin valikoima aseen osia, lippaita, ammuntatarvikkeita, asesepän työkaluja ja optiikkaa Suomi

BERETTA USA
CHOKE TUBE OPTIMACHOKE HP +2" 12 GAUGE

082442161617 913500061
Beretta Optima-Choke® HP tubes stand up to the heat of competition. Manufactured from high strength steel and finished in a nickel-alloy coating, these chokes guarantee significant corrosion resistance and have the ability to withstand the rigors of steel shot. Optima-Choke® HP tubes are fully interchangeable on all Beretta barrels that are threaded for Optima-Choke® HP. Fits: Beretta A400 Xtreme, A400 Xplor, A400 Xcel, 690, 692, DT11, A300 Xtrema, SV10 Beretta suggest that - when using Steel Shot - you only use choke tubes marked with the SP (Steel Proof) identification on the side and that you use the most open choke system possible – i.e. Cylinder / Improved Cylinder / or Modified. Beretta DOES NOT recommend use of Steel Shot in the X-Tra Full Turkey / Full / or Improved Modified choke tube. As with any shotgun, always be sure to check your choke tubes during use to verify that they are tight in the barrel. Loose choke tubes can cause barrel damage. WARNING: Use of the Optima HP choke tube in an Optima firearm (without the HP designation) can cause severe damage to the choke tube and barrel when the shotgun is fired. Only use Optima HP choke tubes in these Optima HP shotguns: SV10 Perennia, SV10 Prevail, A400 Family of shotguns, 690, 692, DT-11 and UGB25 Sporting.
89.9 89.9 1 EUR
New
Tuotenro: 913500061
BERETTA USA CYLINDER C12 OCHP EXTENDED +50MM CHOKE
Valmistajan tuotenumero: C62274 082442161617
89.9 EUR 0 89,90 € *
Ilmoita saatavuudesta
Loppu varastosta. Saatavuus ei tiedossa.
Ominaisuudet: Malli: A400 Xplor, SV10, 692 Sporting, A300, DT11, A300 Xtrema, A400 Lite, A400 Xcel Multi-Target, 690 Merkki: Beretta Väljyys: 12 Gauge

Ominaisuudet

Halkaisija: 12 Gauge Malli: A400 Xcel Multi-Target,A400 Lite,A300 Xtrema,690,A400 Xplor,DT11,SV10,A300,692 Sporting Valmistaja: Beretta Toimituksen paino: 0,091kg Toimituksen korkeus: 25mm Toimituksen leveys: 102mm Toimituksen pituus: 203mm




Beretta Optima-Choke® HP tubes stand up to the heat of competition. Manufactured from high strength steel and finished in a nickel-alloy coating, these chokes guarantee significant corrosion resistance and have the ability to withstand the rigors of steel shot. Optima-Choke® HP tubes are fully interchangeable on all Beretta barrels that are threaded for Optima-Choke® HP. Fits: Beretta A400 Xtreme, A400 Xplor, A400 Xcel, 690, 692, DT11, A300 Xtrema, SV10 Beretta suggest that - when using Steel Shot - you only use choke tubes marked with the SP (Steel Proof) identification on the side and that you use the most open choke system possible – i.e. Cylinder / Improved Cylinder / or Modified. Beretta DOES NOT recommend use of Steel Shot in the X-Tra Full Turkey / Full / or Improved Modified choke tube. As with any shotgun, always be sure to check your choke tubes during use to verify that they are tight in the barrel. Loose choke tubes can cause barrel damage. WARNING: Use of the Optima HP choke tube in an Optima firearm (without the HP designation) can cause severe damage to the choke tube and barrel when the shotgun is fired. Only use Optima HP choke tubes in these Optima HP shotguns: SV10 Perennia, SV10 Prevail, A400 Family of shotguns, 690, 692, DT-11 and UGB25 Sporting.
Uutiskirje