Brownells Finland - Laajin valikoima aseen osia, lippaita, ammuntatarvikkeita, asesepän työkaluja ja optiikkaa Suomi

EGW
CZ P10C LEUPOLD DELTAPOINT PRO SIGHT MOUNT

841370117093 296000542
Material: 7075 Aluminum Coating: Matte Black Hardcoat Overall Length: 1.811" Overall Width: .99" Mounting Hardware: (2) 6-32 Button Head Screws, (2) 6-32 Flat Head Screws, (1) 6-32 Set Screw Red Dot Fitment: Vortex Viper/Venom, Burris FastFire, Crimson Trace CTS-1200, CTS-1300, Docter EGW's red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install. Simply remove the rear sight on your gun and replace it with our mount in order to mount yourVortex Viper/Venom, Burris FastFire, or Docter red-dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs 2 Button Head Cap Screws - Provided for Vortex Viper and Venom Sights 2 Flat Head Cap Screws - Provided for Burris FastFire and Docter Sights The screws that are included with this mount require a 5/64'' allen wrench for installation.
84.9 84.9 1 EUR
Tuotenro: 296000542
EGW CZ P10C LEUPOLD DELTAPOINT PRO SIGHT MOUNT
Valmistajan tuotenumero: 49393 841370117093 Materiaali: 7075 Alumiini Päällyste: Mattamusta kova-anodisointi Kokonaispituus: 1.811" Kokonaisleveys: .99" Kiinnitystarvikkeet: (2) 6-32 nappipääruuvia, (2) 6-32 litteäpääruuvia, (1) 6-32 säätöruuvi Punapistetähtäimen yhteensopivuus: Vortex Viper/Venom, Burris FastFire, Crimson Trace CTS-1200, CTS-1300, Docter EGW:n punapistetähtäimet on tarkoitettu asennettavaksi vasemmalta oikealle (kun piippu osoittaa eteenpäin). Kiskon kartio on progressiivinen, mikä helpottaa asennusta. Poista vain aseen takatähtäin ja korvaa se EGW:n kiinnikkeellä asentaaksesi Vortex Viper/Venom, Burris FastFire tai Docter punapistetähtäimen. Aseen muutoksia ei tarvita. Voit milloin tahansa ottaa EGW:n kiinnikkeen pois ja asentaa takatähtäimen takaisin. Kiinnitystarvikkeet sisältyvät toimitukseen. Asennusohjeet Poista takatähtäin* Asenna EGW:n tähtäinkisko kiskopaikkaan Kiristä säätöruuvi (jos sovellettavissa) Aseta punapistetähtäin EGW:n tähtäinkiskoon (punapistetähtäimen ja kiskon väliin laitettu pieni paperinpala helpottaa irrotusta ja pitää Loctite-liiman pois punapistetähtäimestä.) Levitä sinistä Loctite-liimaa mukana tuleviin kiinnitysruuveihin Kiristä kiinnitysruuvit momenttiin 15in/lbs 2 nappipäistä ruuvia - Mukana Vortex Viper ja Venom tähtäimiä varten 2 litteäpäistä ruuvia - Mukana Burris FastFire ja Docter tähtäimiä varten Mukana tulevat ruuvit vaativat 5/64'' kuusiokoloavainta asennukseen.
84.9 EUR 0 84,90 € *
Ilmoita saatavuudesta
Ei saatavilla.
Ominaisuudet: Jalustojen lukumäärä: 1-Piece Malli: P-10 Compact Materiaali: Aluminum Merkki: CZ Tyyppi: Tactical Väri: Black

Ominaisuudet

Jalustojen lukumäärä: 1-Piece Malli: P-10 Compact Materiaali: Aluminum Tyyli: Tactical Valmistaja: CZ Väri: Black Toimituksen paino: 0,036kg Toimituksen korkeus: 25mm Toimituksen leveys: 89mm Toimituksen pituus: 140mm

Tuotekuvaus

Made in USA



Material: 7075 Aluminum Coating: Matte Black Hardcoat Overall Length: 1.811" Overall Width: .99" Mounting Hardware: (2) 6-32 Button Head Screws, (2) 6-32 Flat Head Screws, (1) 6-32 Set Screw Red Dot Fitment: Vortex Viper/Venom, Burris FastFire, Crimson Trace CTS-1200, CTS-1300, Docter EGW's red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install. Simply remove the rear sight on your gun and replace it with our mount in order to mount yourVortex Viper/Venom, Burris FastFire, or Docter red-dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs 2 Button Head Cap Screws - Provided for Vortex Viper and Venom Sights 2 Flat Head Cap Screws - Provided for Burris FastFire and Docter Sights The screws that are included with this mount require a 5/64'' allen wrench for installation.
Uutiskirje