Complete Upper Assembly for Upgrading Your Factory G17 or a Custom Build Top off your next custom pistol build or upgrade with our Complete RMR Slide Assembly for Glock® 17 Gen3, available in three configurations. You can get your slide with a premium match-quality barrel, a ½"-28 tpi threaded barrel to accept a sound suppressor, or with a ported barrel that vents through a window in the top of the slide to counteract muzzle rise and help you keep the sights on the target for subsequent shots. This eliminates the need to install a bulky compensator on the muzzle, which means your new comped pistol will still fit standard holsters for the Glock® 17. These slides come fully assembled with the barrel and all the internal small parts installed, making this RMR Slide the ideal upgrade for your factory Glock® 17 Gen3 pistol or the perfect "top half" for a brand-new custom gun built on a compatible frame from another manufacturer. It features a pre-cut slot for easy, secure, low-profile mounting of a reflex red dot sight that fits the Trijicon RMR footprint. If you're not mounting a red dot at the moment, we've included a lightweight reinforced polymer cover plate to neatly fill the slot. Our RMR Slide comes with standard-height front and rear sights, which can serve as your primaries or a backup "iron" sights when paired with a red dot sight. Comes COMPLETE with barrel, front & rear sights, and small parts installed Fits Gen3 Glock® 17 pistols & clones Built-in mounting slot for reflex sights with the Trijicon RMR footprint Optic slot cover plate & recoil spring assembly also included Slide machined from 416 stainless steel billet, with a Black Nitride finish Choice of Solid top slide with standard barrel or ½"-28 tpi threaded barrel, OR distinctive top Window slide with ported/compensated barrel Each RMR Slide for Glock® starts life as a billet of 416 stainless steel that is machined to Glock® factory specifications inside, with a tough, extremely wear-resistant black Nitride finish. This slide fits standard Glock® factory G17 frames and compatible aftermarket frames. The match-quality barrel is machined from premium 416R stainless steel alloy. The muzzle of the threaded barrel has standard ½"-28 tpi threads. The ported barrel has eight ports angled to provide just the right counterforce to muzzle rise. On the sides at the rear, you'll find distinctive wide, shallow cocking serrations that give excellent "purchase" to rack the slide, plus a mirrored set of serrations up front that aid in manipulating the slide to press-check the chamber. Both sets of serrations make it easy to manipulate your pistol's slide from any angle and in any position. Hey, we have to admit these serrations just look very cool, too! Whether you're assembling a custom pistol to meet specific needs, or you're upgrading a factory Glock 17 for enhanced performance and versatility, a Brownells complete slide assembly is helps you complete your project quickly and easily! Brownells Gun Tech™ Note: Channel liner required for these slides. Channel liner is a press fit and requires a tool to install. We recommend #777-100-017.
Kattava liukukokoonpano Glock 17:lle!
Täydellinen yläkokoonpano, joka parantaa tehdasvalmisteista G17:ää tai mukautettua rakennetta. Lisää seuraavaan mukautettuun pistoolirakennukseesi tai päivitä se Complete RMR Slide Assembly -kokoonpanolla Glock® 17 Gen3 -mallille, joka on saatavana kolmessa eri kokoonpanossa.
Ominaisuudet:
- Premium-laatuinen match-barrel, ½"-28 tpi kierre, tai portattu tynnyri, joka vähentää piipun nousua.
- Täydellinen kokoonpano, joka sisältää tynnyrin ja kaikki sisäiset pienosat.
- Sopii Gen3 Glock® 17 -pistooleille ja niiden klooneille.
- Integroitu asennusaukko reflex-sightille, joka sopii Trijicon RMR -muotoon.
- Optiikka-aukko peittokappale ja palautusjousikokoonpano mukana.
- Liukukokoonpano valmistettu 416 ruostumattomasta teräksestä, musta nitride-pinta.
- Valittavana kiinteä yläliuku tavallisella tynnyrillä tai portatulla yläliu'ulla.
Jokainen RMR Slide Glock®:lle alkaa 416 ruostumattoman teräksen billeteistä, jotka on koneistettu Glock®-tehtaan spesifikaatioiden mukaan. Liukukokoonpano sopii standardeille Glock® G17 -runkoille ja yhteensopiville jälkimarkkinoiden runkoille.
Brownells Gun Tech™ -huomautus: Kanavaputki vaaditaan näille liukuille. Kanavaputki on puristussovite ja vaatii työkalun asennukseen. Suosittelemme #777-100-017.
Olitpa sitten kokoamassa mukautettua pistoolia erityistarpeita varten tai päivittämässä tehdasvalmisteista Glock 17:ää parannetun suorituskyvyn ja monipuolisuuden saavuttamiseksi, Brownellsin täydellinen liukukokoonpano auttaa sinua saamaan projektisi valmiiksi nopeasti ja helposti!
Apu ja yhteydenotto
Uutiskirje
Perinteinen näkymä
Mobiilinäkymä