Brownells Finland - Laajin valikoima aseen osia, lippaita, ammuntatarvikkeita, asesepän työkaluja ja optiikkaa Suomi

BROWNELLS
CHECKERING CRADLE

050806104105 080026000
Locks All Stocks In Best Position For No Strain Layout & Checkering
A cradle makes checkering so much easier - and the results so much better - that we have never met a professional stockmaker who did not use a checkering cradle! Two of the most important advantages of a good checkering cradle are: 1) It allows you to work with both hands and rotate the stock as you checker across the pattern, keeping the work area at the most comfortable, controlled position. This eliminates the clumsy and difficult task of trying to work around a stationary stock - sometimes almost to the point of standing on your head - and following the pattern correctly from border to border. 2) Prevents the back and forth wobble that kills the cutting action of the checkering tools. If the stock is not securely held, it will move with the cutter. This movement lets the cutter grab the stock and makes it almost impossible to cut straight, even lines of uniform depth. Simple in design, low in cost, of rugged wood construction and highly practical. Adjustable to hold rifle stocks up to 33" long (which will include all stocks except Mannlicher-style) and all shotgun stocks and forends. Holds the stock rigidly, without marring finish, yet permits turning of the stock as the work progresses. Convenient also for stock inletting, sanding, staining and finishing. Bolt directly to the bench, or lock into a sturdy vise. Comes complete with all holders, bolts and instructions.
SPECS: 41½" (105cm) long, 8¼" (21cm) high, 1½" (3.8cm) wide.
204.9 204.9 1 EUR
Tuotenro: 080026000
BROWNELLS CHECKERING CRADLE
Valmistajan tuotenumero: 080026000 050806104105 Checkering-teline tekee etsauksesta huomattavasti helpompaa ja tulokset huomattavasti parempia - emme ole koskaan tavanneet ammattimaista tukinvalmistajaa, joka ei käyttäisi checkering-telinettä! Kaksi tärkeintä etua hyvässä checkering-telineessä ovat: 1) Sen avulla voit työskennellä molemmilla käsillä ja kääntää tukkia etsauksen aikana pitkin kuviota, pitäen työalueen mukavimmassa ja hallituimmassa asennossa. Tämä eliminoi kömpelön ja vaikean tehtävän yrittää työskennellä paikallaan olevan tukin ympärillä - joskus melkein pää alaspäin - ja seurata kuviota oikein reunoilta reunoille. 2) Estää edestakaista heilumista, joka tappaa etsaustyökalujen leikkausvoiman. Jos tukki ei ole tukevasti kiinni, se liikkuu leikkurin mukana. Tämä liike antaa leikkurin tarttua tukkiin ja tekee suorien, tasalaatuisten viivojen leikkaamisesta lähes mahdotonta. Yksinkertainen muotoilultaan, edullinen hinnaltaan, kestävää puurakennetta ja erittäin käytännöllinen. Säädettävissä pitämään aseiden tukit, joiden pituus on enintään 33" (joka kattaa kaikki tukit paitsi Mannlicher-tyyppiset) ja kaikki haulikon tukit ja etutukit. Pitää tukin jäykästi, ilman viimeistelyn vahingoittamista, mutta sallii tukin kääntämisen työn edetessä. Kätevä myös tukin upotuksessa, hionnassa, värjäyksessä ja viimeistelyssä. Kiinnitä suoraan penkkiin tai lukitse tukevaan puristimeen. Toimitetaan täydellisenä kaikkien pidikkeiden, pulttien ja ohjeiden kanssa.
204.9 EUR 0 204,90 € *
Jälkitilaus, toimitusaika n. 4-12 viikkoa USA:n varastosta.

Ominaisuudet

Toimituksen paino: 2,722kg Toimituksen korkeus: 81mm Toimituksen leveys: 171mm Toimituksen pituus: 1 067mm

Tuotekuvaus

Made in USA




Locks All Stocks In Best Position For No Strain Layout & Checkering
A cradle makes checkering so much easier - and the results so much better - that we have never met a professional stockmaker who did not use a checkering cradle! Two of the most important advantages of a good checkering cradle are: 1) It allows you to work with both hands and rotate the stock as you checker across the pattern, keeping the work area at the most comfortable, controlled position. This eliminates the clumsy and difficult task of trying to work around a stationary stock - sometimes almost to the point of standing on your head - and following the pattern correctly from border to border. 2) Prevents the back and forth wobble that kills the cutting action of the checkering tools. If the stock is not securely held, it will move with the cutter. This movement lets the cutter grab the stock and makes it almost impossible to cut straight, even lines of uniform depth. Simple in design, low in cost, of rugged wood construction and highly practical. Adjustable to hold rifle stocks up to 33" long (which will include all stocks except Mannlicher-style) and all shotgun stocks and forends. Holds the stock rigidly, without marring finish, yet permits turning of the stock as the work progresses. Convenient also for stock inletting, sanding, staining and finishing. Bolt directly to the bench, or lock into a sturdy vise. Comes complete with all holders, bolts and instructions.
SPECS: 41½" (105cm) long, 8¼" (21cm) high, 1½" (3.8cm) wide.
Uutiskirje