Brownells Finland - Laajin valikoima aseen osia, lippaita, ammuntatarvikkeita, asesepän työkaluja ja optiikkaa Suomi
050806000148 430106222
The Correct Tool for Safe Installation/Removal of Barrel Nuts on H&K Rifles as well as BRN-4 Rifles! This wrench is a necessary tool if you need to assemble one (or several) of our BRN-4 setups. Actually this tool is a must-have item for anybody who works on H&K Rifles, or Brownells very own BRN-4. When installing or removing the barrel, this wrench precisely engages the slots in the barrel nut, ensuring all the torquing force is evenly applied without the wrench slipping off and damaging the barrel or nut. Just slide the tool over the barrel nut, hand tighten the hex nuts on the tool, and start tightening/loosening the barrel nut using a standard ½” torque wrench (a 1” open-end wrench can be used in a pinch). Precision laser cut from hardened steel with an anti-corrosion matte black finish. Note: This wrench can be used on barrel nuts for Heckler & Koch HK416, HK417, MR556, MR762 rifles, and Brownells BRN-4 configurations.
99.9 99.9 1 EUR
New
Tuotenro: 430106222
BROWNELLS BRN-4 BARREL NUT WRENCH
Valmistajan tuotenumero: BRN-4-BNW 050806000148
99.9 EUR 27 99,90 € *
Toimitusaika noin 2-4 viikkoa.
Yli 10 kpl. USA:n varastossa
Ominaisuudet: Malli: BRN-4 Merkki: Brownells

Ominaisuudet

Malli: BRN-4 Valmistaja: Brownells Toimituksen paino: 0,181kg Toimituksen korkeus: 25mm Toimituksen leveys: 76mm Toimituksen pituus: 64mm

Tuotekuvaus

Made in USA



The Correct Tool for Safe Installation/Removal of Barrel Nuts on H&K Rifles as well as BRN-4 Rifles! This wrench is a necessary tool if you need to assemble one (or several) of our BRN-4 setups. Actually this tool is a must-have item for anybody who works on H&K Rifles, or Brownells very own BRN-4. When installing or removing the barrel, this wrench precisely engages the slots in the barrel nut, ensuring all the torquing force is evenly applied without the wrench slipping off and damaging the barrel or nut. Just slide the tool over the barrel nut, hand tighten the hex nuts on the tool, and start tightening/loosening the barrel nut using a standard ½” torque wrench (a 1” open-end wrench can be used in a pinch). Precision laser cut from hardened steel with an anti-corrosion matte black finish. Note: This wrench can be used on barrel nuts for Heckler & Koch HK416, HK417, MR556, MR762 rifles, and Brownells BRN-4 configurations.
Uutiskirje