Material: 7075 Aluminum Coating: Matte Black Hardcoat Overall Length: 1.780" Overall Width: 1.1" Mounting Hardware: (2) 6-32 Flat Head Screws, (1) 6-32 X 3/16 Set Screw Red Dot Fitment: Trijicon RMR, Holosun HS507C This mounts fits: Baby Desert Eagle (Post 2006) EAA Witness Elite Match This mount does not fit: Rock Island 1911s Simply remove the rear sight on your gun and replace it with our mount in order to mount your Trijicon RMR red dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs 2 Flat Head Cap Screws - Provided for Trijicon RMR The screws that are included with this mount require a 5/64'' allen wrench for installation.
Paranna tarkkuuttasi Trijicon RMR -näköalalla!
Tervetuloa Brownells Suomeen! Esittelemme ylpeänä BOMAR TRIJICON RMR SIGHT MOUNT -kiinnityksen, joka on suunniteltu erityisesti Trijicon RMR -punapisteenäköalalle.
Tuotetiedot:
- Materiaali: 7075 Alumiini
- Päällyste: Matte Black Hardcoat
- Kokonaispituus: 1.780"
- Kokonaisleveys: 1.1"
- Asennuskiinnikkeet: (2) 6-32 Flat Head Screws, (1) 6-32 X 3/16 Set Screw
- Punapisteen yhteensopivuus: Trijicon RMR, Holosun HS507C
- Yhteensopivat mallit: Baby Desert Eagle (Post 2006), EAA Witness Elite Match
- Ei yhteensopiva: Rock Island 1911s
Asennusohjeet:
- Poista takasuunta*.
- Asenna EGW Sight Mount kouruun.
- Tiukkaa set screw (jos tarpeen).
- Aseta punapiste EGW Sight Mountiin (pienen paperipalan asettaminen punapisteen ja kiinnityksen väliin helpottaa poistamista ja pitää Loctite:n poissa punapisteestä).
- Käytä sinistä Loctite:a mukana toimitetuissa asennusruuveissa.
- Kireyden asennusruuvit 15in/lbs.
Huom: Mukana toimitettavat ruuvit vaativat 5/64'' kuusiokoloavaimen asennusta varten.