BCM® A/T™ Optic Mounts Capability in the face of the unexpected and catastrophic, the BCM A/T Mount is built in anticipation of a “no fail” shot that will save another human life. PERFORMANCE WITHOUT PEER Improving on Mil-Spec rail interfaces dating back over 30 years, the BCM A/T mount delivers unprecedented zero retention on a properly mounted red dot optic. Low profile and snag-free, BCM A/T Mounts are built with a minimal number of components - delivering a stronger component with less points of failure, ready to take on dynamic and adverse settings. Each A/T Mount features multiple integral recoil lugs to mitigate recoil and counter recoil to preserve your zero and ensure “no fail” shots are placed where intended by the trained rifleman. Starting at 2.15 oz, each 7075T6 billet mount is hard coat anodized per Mil-A-8625F. Additionally, both the steel alloy clamp and nut are hardened with Nitride coating. THE ANGLED TORQUE™ LOCK-UP A/T (Angled Torque) mounts employ angled torque through a patented* clamp which applies triangulating force to create a stronger and more reliable lock up of the mount onto the end user’s rail. To retain the hardware in field conditions, this system uses a serrated locking spring-washer to prevent the loss of torque on the shaft nut. With an equivalent load applied, the A/T Mount delivers approximately twice the clamping force at the picatinny rail, versus a legacy horizontal interface. * US Patent D973.826, and other patents pending THE FLEET The A/T fleet is built optimized for both a variety of missions and proven red dot optics. Aimpoint® T-2, T-1 and CompM5 series: The Marksman lower 1/3 co-witness The Close Combat 1.93” Trijicon® MRO® The Marksman lower 1/3 co-witness The Close Combat 1.93” MADE IN AMERICA All BCM components and accessories unite state of the art manufacturing with lightweight and durable materials to ensure components that last a lifetime, performing far beyond performance requirements established nearly six decades ago. Aimpoint, T-2, T-1, CompM5 trademarks are property of Aimpoint Inc. Trijicon, MRO trademarks are property of Trijicon Inc.
BCM A/T Optic Mount - Luotettava valinta äärimmäisiin tilanteisiin
BCM® A/T™ Optic Mounts tarjoavat huipputason suorituskykyä odottamattomissa ja katastrofaalisissa olosuhteissa. BCM A/T Mount on suunniteltu "no fail" -laukausta varten, joka voi pelastaa toisen ihmisen hengen.
SUORITUSKYKY TANSSIMATTA
BCM A/T mount parantaa Mil-Spec-rautaliitoksia, jotka ovat olleet käytössä yli 30 vuotta. Se tarjoaa ennennäkemättömän nollapidon oikein asennetulle punapiste-ötylle. Alhainen profiili ja tarttumattomuus tekevät BCM A/T Mountista erinomaisen valinnan dynaamisiin ja haastaviin ympäristöihin.
- Jokaisessa A/T Mountissa on useita sisäänrakennettuja rekyylilukkoja, jotka vähentävät rekyyliä ja säilyttävät nollan.
- Alkaen 2.15 oz, jokainen 7075T6 billette on kovakromattu Mil-A-8625F -standardin mukaan.
- Teräksinen puristin ja mutteri on kovetettu nitride-pinnoitteella.
ANGLED TORQUE™ LOCK-UP
A/T (Angled Torque) mountit käyttävät kulmaista vääntöä patentoidun puristimen avulla, joka soveltaa kolmiomaisia voimia varmistaakseen vahvemman ja luotettavamman kiinnityksen käyttäjän railiin. Jotta kiinnitys pysyy paikoillaan kenttäolosuhteissa, tämä järjestelmä käyttää sahalaitapintaisia lukitusjousimuttereita, jotka estävät vääntömomentin häviämisen.
Käytettäessä vastaavaa kuormaa, A/T Mount tuottaa noin kaksinkertaisen puristusvoiman picatinny-rautaa verrattuna perinteiseen vaakaliitokseen. * US Patent D973.826, ja muita patentteja odotettavissa
FLEET
A/T mount on optimoitu monenlaisiin tehtäviin ja todistettuihin punapiste-ötyihin, kuten:
- Aimpoint® T-2, T-1 ja CompM5 sarjat:
- Marksman alhaalla 1/3 co-witness
- Close Combat 1.93” Trijicon® MRO®
VALMISTETTU AMERIKASSA
Kaikki BCM:n komponentit ja lisävarusteet yhdistävät huipputeknologian valmistuksen kevyisiin ja kestäviin materiaaleihin varmistaen, että komponentit kestävät koko eliniän, ylittäen lähes kuusi vuosikymmentä sitten asetetut suorituskykyvaatimukset.
Aimpoint, T-2, T-1, CompM5 tavaramerkit ovat Aimpoint Inc.:n omaisuutta. Trijicon, MRO tavaramerkit ovat Trijicon Inc.:n omaisuutta.