Ominaisuudet
- Materiaali:
Steel
- Tyyli:
Rifle Sling Adapter
- Väri:
Black
- Toimituksen paino: 0,045kg
Steel
Rifle Sling Adapter
Black
Tuotenro: 080000687
Matala profiili -adapteri antaa AR-15/M16:lle A2-tyylisellä peräosalla yksipisteisen klipsikiinnityksen/mash-hook/H&K -slingin kiinnityksen käytännöllisyyden ja monipuolisuuden. Tarkkuusjyrsitty 4140 hiiliteräksestä ylimääräistä kestävyyttä varten, ja kiinnityssilmukassa on ylimääräistä metallia, joten ei ole väliä kuinka kovaa vedät tai kierrät slingia, tämä adapteri ei hajoa. Oikeakätinen (RH) malli sisältää silmukan vasemmalla puolella oikeakätisille ampujille; vasenkätinen (LH) malli sisältää silmukan oikealla puolella vasenkätisille ampujille. Ei vaadi pysyviä muutoksia kivääriin: poista vain peräosa, liu'uta adapteri vastaanottimen jatkotuubin päälle ja asenna peräosa uudelleen mukana tulevalla välikappaleella ja pidennetyllä perälevyn ruuvilla.Poistettu ohjelmasta
AR-15/M16 A2 SINGLE-POINT SLING ADAPTER tarjoaa A2-tyyliselle peräosalle kätevän ja monipuolisen ratkaisun yksipisteisen olkahihnan kiinnittämiseen. Tämä adapteri on suunniteltu erityisesti oikeakätisille ampujille, mutta saatavilla on myös vasenkätinen malli.
Adapterin mukana toimitetaan välikappale ja pidennetty perälevyn ruuvi, joten asennus on vaivatonta ja nopeaa.
Steel
Rifle Sling Adapter
Black
installation 28.6.2018
the kit assumes you are altering a carbine buffer tube. Instructions refer to the extra spacer that one would need when installing an A2 fixed stock on a carbine rifle(16" buffer tube is shorter).... I installed this on standard 20 inch rifle buffer tube. Unfortunately, the screw that was included in the kit was too long for the rifle buffer tube and will only work if you're modifying a carbine model with a carbine buffer tube and needed a spacer to install A2 stock... fortunately, I was able to use the existing screw and reinstall the stock, but would like one a little shorter than the one provided( or an extra screw for that option) to accommodate standard rifle buffer tube. I might have to cut the screw provided order to get maximum threads... even though only adds up 5/16 of an inch... would like to have that extra threads in stock that holds it all together.
Great POA 15.9.2016
The adapter looks very well made and sturdy, just the same as the other reviews state. The only thing I would change about it is not with the adapter but with the hardware. I installed mine on an olympic arms lower and the included spacer on mine kept rattling around some. I had to make a shim out of a 1/2" flat washer. It took some time but I was able to get it to just the right tolerances that it would hold both the spacer and the adapter tight on the butt stock. With the slight variances in tolerance from rifle to rifle, that is to be expected and I do not fault Brownells at all. Maybe they could include a couple other spacers that differ by a few hundredths of an inch in length. I would have paid $5 more just for that convenience. Otherwise, excellent product and highly recommend!
Kohdattiin virhe tämän sisällön lataamisessa. Päivitä sivu jatkaaksesi. Jos ongelma jatkuu, ota yhteyttä asiakaspalveluumme.