The Strike Industries Aluminum Extended Magazine Plate for GLOCK™ G19 (9mm) was designed to provide smoother magazine reloading through a slow drag / no snag design while maintaining maximum magazine capacity. Machined from 6061-T6 aluminum, this Extended Magazine Plate (EMP) adds plus 5 9mm rounds to OEM double stack GLOCK™ G19 magazines. Following the success of our EMP systems for pistols, the form factor and unique geometric design gives a unified and aggressive aesthetic look to your GLOCK™ G19. Included is an aluminum plate which adds extra locking security. Give your GLOCK™ pistol the extra rounds it deserves with the Strike Industries Aluminum Extended Magazine Plate (EMP) for GLOCK™ G19 (9mm). WARNING: DO NOT OVERTIGHTEN set screw when installing the aluminum locking plate. If you are unsure, please contact our customer support team or consult with your local gunsmith. Package Contents: x1 Aluminum Extended Magazine Plate for GLOCK™ G19 x1 Extended length spring x1 Aluminum locking plate x1 Aluminum locking plate set screw (M3x8mm) x1 Hex tool x1 Warning card Product Features: Machined from 6061-T6 aluminum Plus 5 round capacity for 9mm Includes aluminum locking plate Low drag / no snag design Fits USPSA 140mm race division limit Available in anodized SI BLACKLINE, REDLINE or FDELINE colors COMPATIBILITY: GLOCK™ factory OEM G19 (9mm) double stack magazines SI EMP Pocket Clip Magwell: tested to work with SI magwells NOT COMPATIBLE: G23 (.40 Cal) 10-round magazines ETS Magazines NOTE: Not for sale to California, Hawaii, New York and New Jersey residents due to 10-round state laws. The checkout process will show NO shipping method available. It is the responsibility of the customer to know and abide with local gun laws. DISCLAIMER: Due to numerous factors that take place during the anodization process, the color lines from batch to batch of a certain product may vary Threaded holes located on EMP are anodizing blind holes and may not be completely covered with coating WARNING: DO NOT OVERTIGHTEN set screw when installing the aluminum locking plate. If you are unsure, please contact our customer support team or consult with your local gunsmith. SI aluminum EMP was intentionally designed to be a tight fit and can damage the polymer magazine body base ears. Must be installed by a certified gunsmith only. Use of small c-clamp (or similar tool) to gently and lightly squeeze the bottom middle of the magazine body just above the plastic locking ears where the SI aluminum EMP attaches to the magazine. Just enough so the SI aluminum EMP will slide in or out. Be careful not to bend the OEM magazine body metal liner and remove the c-clamp (or similar tool) as soon as the SI aluminum EMP is installed or removed. C-clamp or similar tool may mar/scratch magazine body surface. Please be careful and use a material to protect the magazine body surface. DISCLAIMER: -This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols. --“GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks owned by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither Strike Industries Inc. nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. -CALIFORNIA PROPOSITION 65 WARNING:- WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information: www.P65Warnings.ca.gov
Laajenna GLOCK® G19 -kiväärisi kapasiteettia Strike Industriesin alumiinisella jatkomakupohjalla!
Strike Industriesin alumiininen jatkomakupohja GLOCK™ G19:lle (9mm) on suunniteltu tarjoamaan sujuvampi patruunalaatikon lataaminen hidastetun vetämisen / ei tarttumisen muotoilun avulla, samalla säilyttäen maksimaalisen patruunalaatikon kapasiteetin. Tämä jatkomakupohja (EMP) on valmistettu 6061-T6 alumiinista ja lisää viisi 9mm patruunaa OEM kaksoisrivi GLOCK™ G19 -patruunalaatikoihin.
Ominaisuudet:
- Valmistettu 6061-T6 alumiinista
- Lisää 5 patruunan kapasiteetti 9mm:lle
- Sisältää alumiinisen lukituslevyn
- Alhainen vetovastus / ei tarttumista -muotoilu
- Sopii USPSA 140mm kilpailurajalle
- Saatavana anodisoituna SI BLACKLINE, REDLINE tai FDELINE -väreissä
Yhteensopivuus:
- GLOCK™ tehdas OEM G19 (9mm) kaksoisrivi -patruunalaatikot
- SI EMP Taskuklipsi
- Magwell: testattu toimimaan SI magwellien kanssa
Ei yhteensopiva:
- G23 (.40 Cal)
- 10-patruunan patruunalaatikot
- ETS-patruunalaatikot
HUOM: Ei myytävänä Kalifornian, Havaijin, New Yorkin ja New Jerseyn asukkaille 10-patruunan osavaltion lakien vuoksi. Kassaprosessi ei näytä olevan saatavilla toimitusvaihtoehtoja.
Asiakkaan vastuulla on tuntea ja noudattaa paikallisia ase lakeja.
Varoitus:
Älä kiristä asennusruuvia liikaa alumiinisen lukituslevyn asentamisen yhteydessä. Jos olet epävarma, ota yhteyttä asiakastukeemme tai kysy paikalliselta aseasentajalta. Strike Industriesin alumiininen EMP on tarkoituksellisesti suunniteltu tiukaksi ja se voi vahingoittaa polymeerista patruunalaatikon runkoa. Asennus on suoritettava vain sertifioidun aseasentajan toimesta.
Käytä pientä C-puristinta (tai vastaavaa työkalua) varovasti puristaaksesi patruunalaatikon runkoa alhaalta keskeltä juuri muovisten lukituskorvien yläpuolelta, johon SI alumiininen EMP kiinnittyy. Vain sen verran, että SI alumiininen EMP liukuu sisään tai ulos. Ole varovainen, ettet taivuta OEM-patruunalaatikon metallista vuorauksia ja poista C-puristin (tai vastaava työkalu) heti, kun SI alumiininen EMP on asennettu tai poistettu. C-puristin tai vastaava työkalu voi naarmuttaa patruunalaatikon pintaa. Ole varovainen ja käytä materiaalia suojataksesi patruunalaatikon pintaa.
Vastuuvapauslauseke: Tämä tuote ei ole valmistettu, valtuutettu, hyväksytty tai taattu GLOCKin toimesta. GLOCK ei takaa tai edusta, että tämä tuote on yhteensopiva GLOCK-pistoolien kanssa. "GLOCK" on GLOCK, Inc.:n liittovaltion rekisteröity tavaramerkki ja yksi monista tavaramerkeistä, joita omistaa GLOCK, Inc. ja GLOCK Ges.m.b.H. Strike Industries Inc. eikä tämä sivusto ole millään tavalla sidoksissa tai muuten hyväksytty GLOCK, Inc.:n tai GLOCK Ges.m.b.H.:n toimesta. "GLOCK" -sanan käyttö tällä sivulla on vain GLOCK-pistoolien, osien tai komponenttien myynnin mainostamista varten.
KALIFORNIA PROPOSITION 65 VAROITUS: Tämä tuote sisältää kemikaaleja, jotka tunnetaan Kalifornian osavaltiossa aiheuttavan syöpää ja synnynnäisiä vikoja tai muita lisääntymishaittoja. Lisätietoja: www.P65Warnings.ca.gov