Rock-Solid Mounts With Patented Quick-Detach System
Quick-release lever-lock system clamps solidly to flattop rail and will not work loose even under heavy recoil—the more force acting on the lever, the tighter it locks. Depress the release tab to swing the lever open, and the mount easily lifts off the rifle. Adjustable with a flat head screwdriver or even a coin for an ultra-secure, no-slip fit on almost any Picatinny or Weaver-style rail, including over- or under-sized commercial rails. Lever may be configured to lock to the front or the rear to suit the operator’s preference. Large locking bar on the side of the mount engages the maximum amount of rail area, while the crossbolt and two integral locking lugs ensure rock-solid engagement of rail slots to prevent movement under recoil. Five heavy duty steel hex head screws (three on top, two on bottom) clamp the vertically split ring halves together. Cutouts in the ring sides and in the base reduce weight without sacrificing strength. AD-68 Aimpoint Mount is designed for Aimpoint optics or similar aiming devices requiring a single, 30mm ring, including the Comp C3 and M2/ML2/M3/ML3 series. Available in four configurations to suit a variety of mounting needs. Standard co-witnesses “iron” sights near the center of the optic when mounted on an AR-15/M16/M4 with standard-height mil-spec sights.
SPECS: 6061 T6 aluminum, hardcoat anodized, matte black. Height measured from top of rail to bottom of scope body. Standard - .940” high.
Lisää...
Asiakasarviot: AMERICAN DEFENSE MANUFACTURING AIMPOINT STANDARD MOUNT
Arvioiden lukumäärä: 3
Arvostelut brownells.com sivustolla: 3
Arvioiden keskiarvo: 5
Great mount, looks/works great!(1.1.2011)
I ended up getting this for my Comp C3 and it is great. Easy and quick to take on and off. Definitely worth the money.
Sturdy mount. Accurate description.(4.2.2012)
After debating between the Larue-68 and the AD-68 mount, I decided on the AD-68. It is easy to install with an Aimpoint Comp ML2. A friend uses this mount with his Vortex StrikeFire, as well. I was a little concerned about the height of the mount, due to the fact that there are three different 'height specific' models listed. As described, this one provides a center co-witness on a M4 with standard height sights. The AD-68 does not have all of the features of the Larue-68 (storage for a battery). However, it is very sturdy and well made.
Would buy again(22.7.2012)
Was time to upgrade my patrol rifle Sig M400 with red dot and folding rear sight. The red dot is an aimpoint there are a lot of mount out there but this one is easy to install and will not move. I like the standard you can still see your open sights in the lower 1/2 of the aimpoint
Tuotenro: 100003650 AMERICAN DEFENSE MANUFACTURING AIMPOINT STANDARD MOUNT Valmistajan tuotenumero: AD68STD818503010101 Pikalukitus vipu-lock system pihdit lujasti flattop rautateiden ja eivät toimi irti jopa raskas rekyyli-toimivat vipu voimakkaammin tiukempi se lukittuu. Paina vapautuskielekettä avautua vipu ja asentaa helposti nostaa pois kivääri. Säädettävissä litteä pää ruuvimeisseli tai jopa kolikon hintaan erittäin turvallisen, ei luista mahtuu lähes kaikki Picatinny tai Weaver-tyylinen rautatie, mukaan lukien yli - tai alamittaisten kaupallinen kiskot. Vipu olla configured jotta kiehkura etu-tai takaosan haluamallasi operaattorin etusijalle. Suuri lukitus Baari puolella mount harjoittaa sujuvuutta, enimmäismäärä crossbolt ja kaksi olennainen lukittavaa korvakkeisiin varmistettava järkähtämätöntä sitoutumista rautatieliikenteen lähtö liikettä alle rekyyli. Viisi raskaiden teräs hex ruuvit (kolme alkuun, kahdella pohjassa) puristin pystysuunnassa jaettu rengas puolikkaat yhteen. Automaattikatkaisijat rengas sivut ja pohja vähentää painoa uhraamatta vahvuus. AD-68 Aimpoint Mount on suunniteltu Aimpoint optiikka tai samanlainen tavoitteena laitteet vaativat yhden 30mm rengas, kuten Comp C3 ja M2/ML2 M3 ML3 sarja. Saatavana neljä kokoonpanoja, jotka sopivat eri kasvaviin tarpeisiin. Standardi todistajien yhteistyössä "iron" Nähtävyydet lähellä keskustaa optiikka, kun asennettu AR-15/M16/M4 standardi korkeus mil-spec nähtävyyksiä.
249.9EUR2249,90 €
*
Toimitusaika noin 2-4 päivää. 1 kpl. paikallisvarastossa 2 kpl. USA:n varastossa
Rock-Solid Mounts With Patented Quick-Detach System
Quick-release lever-lock system clamps solidly to flattop rail and will not work loose even under heavy recoil—the more force acting on the lever, the tighter it locks. Depress the release tab to swing the lever open, and the mount easily lifts off the rifle. Adjustable with a flat head screwdriver or even a coin for an ultra-secure, no-slip fit on almost any Picatinny or Weaver-style rail, including over- or under-sized commercial rails. Lever may be configured to lock to the front or the rear to suit the operator’s preference. Large locking bar on the side of the mount engages the maximum amount of rail area, while the crossbolt and two integral locking lugs ensure rock-solid engagement of rail slots to prevent movement under recoil. Five heavy duty steel hex head screws (three on top, two on bottom) clamp the vertically split ring halves together. Cutouts in the ring sides and in the base reduce weight without sacrificing strength. AD-68 Aimpoint Mount is designed for Aimpoint optics or similar aiming devices requiring a single, 30mm ring, including the Comp C3 and M2/ML2/M3/ML3 series. Available in four configurations to suit a variety of mounting needs. Standard co-witnesses “iron” sights near the center of the optic when mounted on an AR-15/M16/M4 with standard-height mil-spec sights.
SPECS: 6061 T6 aluminum, hardcoat anodized, matte black. Height measured from top of rail to bottom of scope body. Standard - .940” high.
Lisää...
Asiakasarviot: AMERICAN DEFENSE MANUFACTURING AIMPOINT STANDARD MOUNT
Arvioiden lukumäärä: 3
Arvostelut brownells.com sivustolla: 3
Arvioiden keskiarvo: 5
Great mount, looks/works great!(1.1.2011)
I ended up getting this for my Comp C3 and it is great. Easy and quick to take on and off. Definitely worth the money.
Sturdy mount. Accurate description.(4.2.2012)
After debating between the Larue-68 and the AD-68 mount, I decided on the AD-68. It is easy to install with an Aimpoint Comp ML2. A friend uses this mount with his Vortex StrikeFire, as well. I was a little concerned about the height of the mount, due to the fact that there are three different 'height specific' models listed. As described, this one provides a center co-witness on a M4 with standard height sights. The AD-68 does not have all of the features of the Larue-68 (storage for a battery). However, it is very sturdy and well made.
Would buy again(22.7.2012)
Was time to upgrade my patrol rifle Sig M400 with red dot and folding rear sight. The red dot is an aimpoint there are a lot of mount out there but this one is easy to install and will not move. I like the standard you can still see your open sights in the lower 1/2 of the aimpoint