Brownells Finland - Laajin valikoima aseen osia, lippaita, ammuntatarvikkeita, asesepän työkaluja ja optiikkaa Suomi

BROWNELLS
ACRO CUT SLIDE FOR GLOCK® 34 GEN 3

050806113428 078000581
Build a Long-Slide Competition Pistol With a Perfectly Integrated Aimpoint Sight
The Brownells Acro Cut Slide for Glock® 34 Gen3 brings the ease and convenience of our popular RMR Slides to folks who prefer to mount an Aimpoint Acro P-1 red dot sight on their long-slide competition or target pistol. The slide comes with a slot machined directly into the top for mounting the Acro P-1 - just screw on the red dot (screws included) and... hit the range. No additional hardware to buy. And this slide is the perfect "top-half" for a custom pistol built on a Polymer80 80% frame. Each Acro Cut Slide for Glock® 34 is precision machined from 17-4 stainless steel billet and heat-treated to Rc 41-44 for enhanced wear resistance. Internally, the slide is machined to accept factory or aftermarket Gen3 Glock® parts for maximum customizing freedom. Outside, there's a Glock® factory rear sight dovetail and front sight tenon cut ready for factory or aftermarket "iron" backup sights (can be co-witnessed with the Acro P-1). A tough, non-reflective Black Nitride finish helps resist surface wear and further protects the slide from corrosion. Compatible with any Gen3 Glock® 34 pistol or clone Machined from corrosion-resistant 17-4 stainless steel billet Pre-cut Aimpoint Acro P-1 mounting slot Plus, factory front/rear sight cuts Cooling window cutout on top The Acro Cut Slide for Glock® 34 sports factory-style rear cocking serrations, plus additional front serrations that aid in fast chamber checks and expedite clearing (heaven forbid!) a jam. A window cutout on top helps heat escape and keeps the barrel cool during extended fire. If you have an upgraded barrel with a contrasting finish or a unique exterior pattern (fluting, spirals, "flames," etc.) the window let you show it off! Brownells Gun Tech™ Note: Channel liner required for these slides. Channel liner is a press fit and requires a tool to install. We recommend #777-100-017.
0 0 1 EUR
Tuotenro: 078000581
ACRO luisti ikkunalla Glock 34 Gen 3 musta
Valmistajan tuotenumero: N 050806113428 Brownells Acro Cut Slide Glock® 34 Gen3 -liukukisko tuo suositun RMR Slide -sarjan helppouden ja mukavuuden niille, jotka haluavat kiinnittää Aimpoint Acro P-1 -punapistetähtäimen pitkäpiippuiseen kilpailu- tai tarkkuuspistooliinsa. Liukukiskossa on suoraan yläosaan koneistettu ura Acro P-1:n kiinnittämistä varten - ruuvaa vain punapistetähtäin paikalleen (ruuvit sisältyvät) ja... suuntaa ampumaradalle. Ei tarvitse ostaa lisävarusteita. Tämä liukukisko on täydellinen "yläosa" räätälöityyn pistooliin, joka on rakennettu Polymer80 80% rungolle. Jokainen Acro Cut Slide Glock® 34 on tarkkuuskoneistettu 17-4 ruostumattomasta teräksestä valmistetusta billetistä ja lämpökäsitelty Rc 41-44 kovuuteen parantamaan kulumisenkestävyyttä. Sisäpuolelta liukukisko on koneistettu hyväksymään tehdas- tai jälkimarkkinoiden Gen3 Glock® osat maksimaalisen muokkausvapauden takaamiseksi. Ulkopuolella on Glock® tehtaan takatähtäimen ura ja etutähtäimen tenonileikkaus valmiina tehdas- tai jälkimarkkinoiden "rautatähtäimiä" varten (voidaan käyttää yhdessä Acro P-1:n kanssa). Kestävä, heijastamaton Black Nitride -viimeistely auttaa vastustamaan pinnan kulumista ja suojaa liukukiskoa korroosiolta. Yhteensopiva kaikkien Gen3 Glock® 34 pistoolien tai klooneiden kanssa Koneistettu korroosionkestävästä 17-4 ruostumattomasta teräksestä billetistä Valmiiksi koneistettu Aimpoint Acro P-1 kiinnitysura Lisäksi tehdasvalmisteiset etu-/takatähtäinleikkaukset Viilennysikkuna yläosassa Acro Cut Slide Glock® 34:ssä on tehdasvalmisteiset takalatausserratiot, sekä lisäetuina etuserratiot, jotka auttavat nopeissa patruunakammion tarkastuksissa ja nopeuttavat (toivottavasti ei tarvita!) jumin selvittämistä. Yläosan ikkunaleikkaus auttaa lämmön poistumisessa ja pitää piipun viileänä pitkäaikaisen tulituksen aikana. Jos sinulla on päivitetty piippu kontrastisella viimeistelyllä tai ainutlaatuisella ulkoisella kuvioinnilla (ura, spiraalit, "liekit" jne.), ikkuna antaa sinun näyttää sen! Brownells Gun Tech™ Huomautus: Nämä liukukiskot vaativat kanavavuorauksen. Kanavavuoraus on puristusistuvuus ja vaatii työkalun asennukseen. Suosittelemme #777-100-017.
Ilmoita saatavuudesta
Tätä tuotetta ei voi valitettavasti tilata.
Ominaisuudet: Malli: 34 Merkki: Glock Patruuna: 9 mm Luger Tyyppi: Window Tähtäimet: Aimpoint Acro Viimeistely: Black Nitride

Rajoitukset

  • Lupa vaaditaan

Ominaisuudet

: Kyllä : Kyllä Malli: 34 Patruuna: 9 mm Luger Tyyli: Window Tähtäimet: Aimpoint Acro Valmistaja: Glock Viimeistely: Black Nitride Toimituksen paino: 0,336kg Toimituksen korkeus: 51mm Toimituksen leveys: 51mm Toimituksen pituus: 229mm

Tuotekuvaus

Made in USA
USA:n vientiluvan tyyppi: 0A501.x



Build a Long-Slide Competition Pistol With a Perfectly Integrated Aimpoint Sight
The Brownells Acro Cut Slide for Glock® 34 Gen3 brings the ease and convenience of our popular RMR Slides to folks who prefer to mount an Aimpoint Acro P-1 red dot sight on their long-slide competition or target pistol. The slide comes with a slot machined directly into the top for mounting the Acro P-1 - just screw on the red dot (screws included) and... hit the range. No additional hardware to buy. And this slide is the perfect "top-half" for a custom pistol built on a Polymer80 80% frame. Each Acro Cut Slide for Glock® 34 is precision machined from 17-4 stainless steel billet and heat-treated to Rc 41-44 for enhanced wear resistance. Internally, the slide is machined to accept factory or aftermarket Gen3 Glock® parts for maximum customizing freedom. Outside, there's a Glock® factory rear sight dovetail and front sight tenon cut ready for factory or aftermarket "iron" backup sights (can be co-witnessed with the Acro P-1). A tough, non-reflective Black Nitride finish helps resist surface wear and further protects the slide from corrosion. Compatible with any Gen3 Glock® 34 pistol or clone Machined from corrosion-resistant 17-4 stainless steel billet Pre-cut Aimpoint Acro P-1 mounting slot Plus, factory front/rear sight cuts Cooling window cutout on top The Acro Cut Slide for Glock® 34 sports factory-style rear cocking serrations, plus additional front serrations that aid in fast chamber checks and expedite clearing (heaven forbid!) a jam. A window cutout on top helps heat escape and keeps the barrel cool during extended fire. If you have an upgraded barrel with a contrasting finish or a unique exterior pattern (fluting, spirals, "flames," etc.) the window let you show it off! Brownells Gun Tech™ Note: Channel liner required for these slides. Channel liner is a press fit and requires a tool to install. We recommend #777-100-017.
Uutiskirje