Brownells Finland - Laajin valikoima aseen osia, lippaita, ammuntatarvikkeita, asesepän työkaluja ja optiikkaa Suomi

GG&G
AC-30 ACCUCAM QUICK DETACH SCOPE MOUNT

813157000942 336000054
In order to provide the shooter with the ability to gain more eye relief, GG&G has introduced the AC-30 Accucam QD Mounting Base With Integral 30mm Scope Rings. This mounting base is tall enough to provide clearance for the latest large objective lens-long range optics. The integrated Accucam Quick Detach Lever System provides the shooter with the ability to quickly remove the scope in order to utilize other optics as the mission may require, and have the confidence of 1/2 MOA repeatability upon reinstallation. The overall length of the AC-30 Accucam QD Scope Mounting Base is five inches. The mounting base portion is four inches in length and with its skeletonized construction weighs only six ounces. The inside ring to inside ring dimension is 3 3/4 inches. Designed and manufactured to meet the rigors of combat and professional use, the AC-30 QD Mounting Base is manufactured from solid billet 6061 T6 aluminum alloy and has a Type III hard coat anodized matte black mil-spec finish. All edges of the quick detach scope mount have been dehorned to protect the operator. The base can be quickly installed on a dovetail rail in seconds by rotating the Accucam Cam Lever to the locked position. It can then be quickly removed by rotating the Accucam Cam Lever to the unlocked position. Not recommended for .50 BMG or lightweight machine guns. If you are using a 1" scope consider adding Delrin Ring Reducers (084-000-091) to your order.
359.9 359.9 1 EUR
Tuotenro: 336000054
GG&G 30MM 0 MOA ACCUCAM QD SCOPE MOUNT
Valmistajan tuotenumero: GGG1238 813157000942 Ampuakseen paremmin ja saavuttaakseen lisää silmäetäisyyttä, GG&G on tuonut markkinoille AC-30 Accucam QD -kiinnitysalustan, jossa on integroidut 30mm tähtäinrenkaat. Tämä kiinnitysalusta on tarpeeksi korkea tarjotakseen tilaa uusimpien suurten objektiivilinssien pitkän kantaman optiikoille. Integroitu Accucam Quick Detach -vipujärjestelmä mahdollistaa ampujalle tähtäimen nopean irrottamisen, jotta muuta optiikkaa voidaan käyttää tehtävän vaatiessa, ja olla varma 1/2 MOA:n uudelleenasennustarkkuudesta. AC-30 Accucam QD -tähtäinkiinnitysalustan kokonaispituus on viisi tuumaa. Kiinnitysalustan osa on neljän tuuman pituinen ja sen luurankorakenteen ansiosta se painaa vain kuusi unssia. Sisärenkaasta sisärenkaaseen mitattu etäisyys on 3 3/4 tuumaa. Suunniteltu ja valmistettu kestämään taistelun ja ammattikäytön vaatimukset, AC-30 QD -kiinnitysalusta on valmistettu kiinteästä 6061 T6 -alumiiniseoksesta ja siinä on Type III kova anodisoitu mattamusta mil-spec -pintakäsittely. Kaikki pikakiinnitystähtäimen reunat on pyöristetty käyttäjän suojelemiseksi. Alusta voidaan nopeasti asentaa urakiskoon sekunneissa kääntämällä Accucam Cam -vipu lukittuun asentoon. Se voidaan sitten nopeasti poistaa kääntämällä Accucam Cam -vipu avoimeen asentoon. Ei suositella .50 BMG:lle tai kevyille konekivääreille. Jos käytät 1" tähtäintä, harkitse Delrin Ring Reducers -sovitteiden (084-000-091) lisäämistä tilaukseesi.
359.9 EUR 4 359,90 € *
Toimitusaika noin 2-4 viikkoa.
4 kpl. USA:n varastossa
Ominaisuudet: Runkoputken halkaisija: 30mm Tyyppi: Quick Detach Viimeistely: Black

Ominaisuudet

Runkoputken halkaisija: 30mm Tyyli: Quick Detach Viimeistely: Black Toimituksen paino: 0,091kg Toimituksen korkeus: 71mm Toimituksen leveys: 127mm Toimituksen pituus: 191mm

Tuotekuvaus

Made in USA



In order to provide the shooter with the ability to gain more eye relief, GG&G has introduced the AC-30 Accucam QD Mounting Base With Integral 30mm Scope Rings. This mounting base is tall enough to provide clearance for the latest large objective lens-long range optics. The integrated Accucam Quick Detach Lever System provides the shooter with the ability to quickly remove the scope in order to utilize other optics as the mission may require, and have the confidence of 1/2 MOA repeatability upon reinstallation. The overall length of the AC-30 Accucam QD Scope Mounting Base is five inches. The mounting base portion is four inches in length and with its skeletonized construction weighs only six ounces. The inside ring to inside ring dimension is 3 3/4 inches. Designed and manufactured to meet the rigors of combat and professional use, the AC-30 QD Mounting Base is manufactured from solid billet 6061 T6 aluminum alloy and has a Type III hard coat anodized matte black mil-spec finish. All edges of the quick detach scope mount have been dehorned to protect the operator. The base can be quickly installed on a dovetail rail in seconds by rotating the Accucam Cam Lever to the locked position. It can then be quickly removed by rotating the Accucam Cam Lever to the unlocked position. Not recommended for .50 BMG or lightweight machine guns. If you are using a 1" scope consider adding Delrin Ring Reducers (084-000-091) to your order.
Uutiskirje