Brownells Finland - Laajin valikoima aseen osia, lippaita, ammuntatarvikkeita, asesepän työkaluja ja optiikkaa Suomi

REDDING
6.5 GRENDEL COMPETITION BUSHING NECK DIE

611760564789 749017122
The Redding 6.5 Grendel Competition Bushing Neck Sizer Die is similar in concept to the Competition Seating Die, the cartridge case is completely supported and aligned with the sizing bushing before the sizing process begins. As the sizing process starts, the cartridge case remains supported in the tightly chambered, sliding sleeve as it moves upward. The resizing bushing self-centers on the case neck. The decapping rod is maintained in precise alignment by using the internal parts of the die as a linear support much like that of a firing pin. Meanwhile, the micrometer adjustment of the bushing position delivers precise control to the desired amount of neck length to be sized. Bushings and shellholders sold separately. Made in the USA.
234.9 234.9 1 EUR
Tuotenro: 749017122
REDDING 6.5 GRENDEL COMPETITION BUSHING NECK DIE
Valmistajan tuotenumero: 56478 611760564789 Redding 6.5 Grendel Competition Bushing Neck Sizer Die on konseptiltaan samankaltainen kuin Competition Seating Die, sillä patruunan hylsy tuetaan ja kohdistetaan täysin kokoonpuristuspuskurin kanssa ennen kokoonpuristusprosessin alkua. Kun kokoonpuristusprosessi käynnistyy, patruunan hylsy pysyy tuettuna tiukasti kammiossa, liukuvassa holkissa, kun se liikkuu ylöspäin. Kokoonpuristuspuskuri keskittyy itsestään hylsyn kaulaan. Irrotustappi pidetään tarkassa linjassa käyttämällä sisäosia tukena samalla tavalla kuin ampumapistoolin tappia. Samaan aikaan mikrometrin säätö puskurin asennossa tarjoaa tarkkaa hallintaa halutulle kaulan pituudelle, joka halutaan kokoonpuristaa. Puskuroidut ja hylsynpidikkeet myydään erikseen. Valmistettu Yhdysvalloissa.
234.9 EUR 0 234,90 € *
Ilmoita saatavuudesta
Loppu varastosta. Saatavuus ei tiedossa.
Ominaisuudet: Patruuna: 6.5 Grendel

Ominaisuudet

Patruuna: 6.5 Grendel Toimituksen paino: 0,454kg Toimituksen korkeus: 51mm Toimituksen leveys: 102mm Toimituksen pituus: 152mm

Tuotekuvaus

Made in USA



The Redding 6.5 Grendel Competition Bushing Neck Sizer Die is similar in concept to the Competition Seating Die, the cartridge case is completely supported and aligned with the sizing bushing before the sizing process begins. As the sizing process starts, the cartridge case remains supported in the tightly chambered, sliding sleeve as it moves upward. The resizing bushing self-centers on the case neck. The decapping rod is maintained in precise alignment by using the internal parts of the die as a linear support much like that of a firing pin. Meanwhile, the micrometer adjustment of the bushing position delivers precise control to the desired amount of neck length to be sized. Bushings and shellholders sold separately. Made in the USA.
Uutiskirje