Brownells Finland - Laajin valikoima aseen osia, lippaita, ammuntatarvikkeita, asesepän työkaluja ja optiikkaa Suomi
853675008723 100032691
The Ultimate Funnel for Reloaders
The Area 419 billet aluminum powder funnel uses a system of interchangeable, caliber specific, heads to make it the ultimate funnel for reloaders available today. The Area 419 Funnel’s interchangeable heads thread onto the funnel and are neck diameter specific for each caliber. They do not rely on fitting over the body of the case to hold in place. They are sized slightly larger than the neck diameter so that they hold solid on the case. Each head has a bore sized a few thousandths smaller than the bullet diameter, so maximum flow is achieved for each caliber. This is huge for the super ultra-magnum guys (375 Cheytac, 408 Cheytac, 50 BMG, etc).  The interface between the heads and the funnel is designed in such a way that no kernels can ever get stuck between the two, as long as the head is tightened completely. 3/8″ tall straight section at the top to help prevent kernels of powder from bouncing out when poured in. Smooth surfaces at the neck of the funnel and inside the heads promote quick flow and prevent any sticking kernels. MADE IN USA! From USA made aluminum, on a USA made HAAS mill, with USA made cutting tools! The Funnel’s design is both aesthetic and performance driven.  Being machined from a solid billet of 6061-T6 aluminum means no static charge to cling kernels to the funnel walls. This also makes it far safer for use with black powder. “Flutes” on the outside are for looks, on the inside though, they disturb the powder kernels from trying to jam up at the neck. It also gives some airspace so they do not get packed up so tightly, all aimed to increase flow through the nozzle.  
59.9 59.9 1 EUR
Tuotenro: 100032691
AREA 419 419 POWDER FUNNEL
Valmistajan tuotenumero: 419FNBODY 853675008723 Area 419:n valualumiinista valmistettu jauhesuppilo käyttää vaihdettavien, kaliiperikohtaisten päiden järjestelmää, mikä tekee siitä tämän päivän lataajille tarjolla olevan ylivoimaisen suppilon. Area 419 Suppilon vaihdettavat päät kiertyvät suppiloon ja ovat nimenomaan kaulahalkaisijaltaan kaliiperikohtaisia. Ne eivät nojaudu hylsyn runkoon paikallaan pysyäkseen. Ne on mitoitettu hieman suuremmiksi kuin kaulan halkaisija, jotta ne pysyvät tiukasti hylsyssä. Jokaisen pään poraus on muutamia tuhannesosia pienempi kuin luodin halkaisija, jotta jokaiselle kaliiperille saavutetaan maksimaalinen virtaus. Tämä on valtava etu erityisesti super ultra-magnum -käyttäjille (375 Cheytac, 408 Cheytac, 50 BMG jne). Päiden ja suppilon välinen liitäntä on suunniteltu siten, etteivät jyvät voi koskaan jäädä jumiin kahden osan väliin, kunhan pää on kiristetty kunnolla. 3/8 tuuman korkea suora osa yläosassa auttaa estämään jauhejyvien pomppimista ulos kaadettaessa. Suppilon kaulan ja päiden sileät pinnat edistävät nopeaa virtausta ja estävät jyvien takertumisen. VALMISTETTU USA:ssa! USA:ssa valmistetusta alumiinista, USA:ssa valmistetulla HAAS-jyrsinkoneella, USA:ssa valmistetuilla leikkaustyökaluilla! Suppilon suunnittelu on sekä esteettisesti että suorituskyvyltään harkittu. Koska se on koneistettu yhdestä 6061-T6-alumiinikappaleesta, ei suppilon seinämiin tartu staattista sähköä. Tämä tekee siitä myös paljon turvallisemman mustaruudin kanssa käytettäessä. 'Uurteet' ulkopuolella ovat ulkonäköä varten, mutta sisäpuolella ne häiritsevät jauhejyvien pyrkimystä juuttua kaulaan. Ne myös antavat hieman ilmatilaa, jotta jyvät eivät pakkaudu liian tiiviisti, mikä kaiken kaikkiaan lisää virtausta suuttimen läpi.
59.9 EUR 8 59,90 € *
Toimitusaika noin 2-4 viikkoa.
8 kpl. USA:n varastossa
Ominaisuudet: Kaliiperi: Universal

Ominaisuudet

Kaliiperi: Universal Toimituksen paino: 0,079kg Toimituksen korkeus: 56mm Toimituksen leveys: 91mm Toimituksen pituus: 81mm

Tuotekuvaus

Made in USA



The Ultimate Funnel for Reloaders
The Area 419 billet aluminum powder funnel uses a system of interchangeable, caliber specific, heads to make it the ultimate funnel for reloaders available today. The Area 419 Funnel’s interchangeable heads thread onto the funnel and are neck diameter specific for each caliber. They do not rely on fitting over the body of the case to hold in place. They are sized slightly larger than the neck diameter so that they hold solid on the case. Each head has a bore sized a few thousandths smaller than the bullet diameter, so maximum flow is achieved for each caliber. This is huge for the super ultra-magnum guys (375 Cheytac, 408 Cheytac, 50 BMG, etc).  The interface between the heads and the funnel is designed in such a way that no kernels can ever get stuck between the two, as long as the head is tightened completely. 3/8″ tall straight section at the top to help prevent kernels of powder from bouncing out when poured in. Smooth surfaces at the neck of the funnel and inside the heads promote quick flow and prevent any sticking kernels. MADE IN USA! From USA made aluminum, on a USA made HAAS mill, with USA made cutting tools! The Funnel’s design is both aesthetic and performance driven.  Being machined from a solid billet of 6061-T6 aluminum means no static charge to cling kernels to the funnel walls. This also makes it far safer for use with black powder. “Flutes” on the outside are for looks, on the inside though, they disturb the powder kernels from trying to jam up at the neck. It also gives some airspace so they do not get packed up so tightly, all aimed to increase flow through the nozzle.  
Uutiskirje