Brownells Finland - Laajin valikoima aseen osia, lippaita, ammuntatarvikkeita, asesepän työkaluja ja optiikkaa Suomi
793811764642 100047158
The Strike Magazine for GLOCK™ G17 (9mm) is a high-strength impact resistant custom blended SI Polymer Extreme double-stack pistol mag that includes a translucent body for quick visibility of ammo and a specially selected spring for added reliability. The capacity of the 17+ round translucent magazine body is designed with strategically placed textured and non-textured surfaces. Textured where it’s needed to reduce the shine of the brass and add positive feel. Non-textured at one side for ultra-clear visibility of round count and what’s going on inside. Not only is the mag body translucent, there are also corner round count cuts to give you alternative angles to see how many you got left for the fight. Magazine release cuts are designed on both sides the SI mag and is compatible with right, left and ambidextrous release setups found on factory GLOCK™ GEN3-GEN5 frames. The Strike Magazine for GLOCK™ G17 has a built-in hook slot specifically for the SI Extended Magazine Plate (EMP) steel locking plate for an added extra security when increasing capacity but the baseplate included also has standout features. Side cuts on the baseplate provides easier gripping. Paintable triangle markers at the top of mag body to help identify the magazine is in the correct direction when reloading. ID markers at the bottom of the baseplate allow you to custom mark your mags and also make sure nobody goes home with your stuff. Along with the side cuts, the baseplate also has an added front lip for an increased footprint to help with the standing of the mag to give it a little balance. The included baseplate is a tool-less disassembly design for quick and easy removal with a simply push using your finger nail. The Strike Magazine for GLOCK™ G17 (9mm) is fully loaded with features as an alternative option that should line the walls of your safe and gun bag. COMPATIBLE: -GEN3-5 GLOCK™ 17,17L,19,26,34 -SI Extended Magazine Plate (EMP) NOTE: Not for sale to California, Colorado, Connecticut, Hawaii, Illinois, Maryland, Massachusetts, New Jersey, New York, Vermont and Washington DC residents due to 10 or 15-round state laws. The checkout process will show NO shipping method available. LENGTH    125.55mm WIDTH    28.5mm HEIGHT    41.88mm Product features: -Capacity: 17+ rounds -Translucent magazine body with strategically placed textured and non-textured surfaces -Textured where it’s needed to reduce shine of brass and added positive feel -Non-textured at one side for ultra-clear visibility of round count -Corner round count cuts provides alternative angles to view ammo count from the side or rear of the magazine body -Increased magazine spring strength for reliability -Ambidextrous mag release cuts -Side cuts on baseplate provides easier gripping -Paintable triangle markers at the top of mag body to help identify the magazine is in the correct direction when reloading -ID markers on bottom of baseplate -Baseplate front lip for increased footprint when standing -Included baseplate is a tool-less disassembly design for quick and easy removal -Built-in hook slot specifically for SI Extended Magazine Plate (EMP) steel locking plate for added security when increasing capacity -High-strength impact resistant custom blended SI Polymer Extreme  
44.9 44.9 1 EUR
Tuotenro: 100047158
STRIKE INDUSTRIES 17 ROUND MAGAZINE FOR GLOCK 17
Valmistajan tuotenumero: SIGMAG17 793811764642 Strike Industriesin valmistama GLOCK™ G17 (9mm) -lippaassa on korkealaatuinen iskunkestävä, räätälöity SI Polymer Extreme -kahden rivin pistoolilipas, joka sisältää läpikuultavan rungon nopeaa ammusten tarkistusta varten ja erityisesti valitun jousen lisäluotettavuutta ajatellen. Läpikuultavan, 17+ patruunan lippaan runko on suunniteltu strategisesti sijoitetuilla karhennetuilla ja sileillä pinnoilla. Karhennus on siellä, missä se on tarpeen messinkihohdon vähentämiseksi ja positiivisen tuntuman lisäämiseksi. Toiselta puolelta sileä pinta mahdollistaa erittäin selkeän näkyvyyden patruunoiden määrään ja lippaan sisäiseen tilanteeseen. Lippaan runko ei ole vain läpikuultava, vaan siinä on myös kulmissa laskurin aukot, jotka tarjoavat vaihtoehtoisia kulmia tarkistaa jäljellä olevien patruunoiden määrää. Lippaassa on molemminpuoliset vapautusleikkaukset, jotka sopivat oikean-, vasemman- ja kaksipuolisen vapautuksen asetuksiin, joita löytyy tehdasvalmisteisista GLOCK™ GEN3-GEN5 -runkoista. Strike Industriesin GLOCK™ G17 -lippaassa on myös erityisesti SI Extended Magazine Plate (EMP) -lukkolevylle suunniteltu koukkupaikka lisäturvallisuutta varten, kun kapasiteettia kasvatetaan, mutta mukana tulevassa pohjalevyssä on myös erottuvia ominaisuuksia. Pohjalevyssä olevat sivuleikkaukset helpottavat lippaan käsittelyä. Maalattavat kolmiomerkinnät lippaan yläosassa auttavat tunnistamaan lippaan oikean suunnan latauksen aikana. Pohjalevyssä olevat tunnistusmerkinnät mahdollistavat lippaiden merkitsemisen omiksi ja varmistavat, ettei kukaan lähde kotiin sinun tarvikkeillasi. Sivuleikkausten lisäksi pohjalevyssä on etulippa, joka lisää seisontapintaa ja tasapainoa lippaalle. Mukana tuleva pohjalevy on työkaluton purkamissuunnittelu, joka mahdollistaa nopean ja helpon irrottamisen yksinkertaisesti sormen kynnellä painamalla. Strike Industriesin GLOCK™ G17 (9mm) -lippaassa on ominaisuuksia täynnä oleva vaihtoehto, joka sopii täyttämään asekaappisi ja asepussisi seinät. YHTEENSOPIVUUS: -GEN3-5 GLOCK™ 17,17L,19,26,34 -SI Extended Magazine Plate (EMP) HUOM: Ei myytävänä Kalifornian, Coloradon, Connecticutin, Havaijin, Illinois'n, Marylandin, Massachusettsin, New Jerseyn, New Yorkin, Vermontin ja Washington DC:n asukkaille johtuen 10 tai 15 patruunan osavaltion laeista. Kassaprosessi näyttää, ettei toimitustapaa ole saatavilla. PITUUS 125.55mm LEVEYS 28.5mm KORKEUS 41.88mm Tuotteen ominaisuudet: -Kapasiteetti: 17+ patruunaa -Läpikuultava lippaan runko strategisesti sijoitetuilla karhennetuilla ja sileillä pinnoilla -Karhennus siellä, missä tarvitaan messinkihohdon vähentämiseen ja positiivisen tuntuman lisäämiseen -Sileä pinta toisella puolella erittäin selkeää patruunamäärän näkyvyyttä varten -Kulmalaskurin aukot tarjoavat vaihtoehtoisia kulmia ammusten määrän tarkistamiseen lippaan sivulta tai takaa -Lisätty jousen vahvuus luotettavuuden parantamiseksi -Kaksipuoliset vapautusleikkaukset -Pohjalevyn sivuleikkaukset helpottavat käsittelyä -Maalattavat kolmiomerkinnät lippaan yläosassa auttavat tunnistamaan lippaan oikean suunnan latauksen aikana -Tunnistusmerkinnät pohjalevyssä -Pohjalevyn etulippa lisää seisontapintaa -Mukana tuleva pohjalevy on työkaluton purkamissuunnittelu nopeaa ja helppoa irrottamista varten -Erityinen koukkupaikka SI Extended Magazine Plate (EMP) -lukkolevylle lisäturvallisuutta varten kapasiteetin kasvattamisessa -Korkealaatuinen iskunkestävä räätälöity SI Polymer Extreme
44.9 EUR 0 44,90 € *
Jälkitilaus, toimitusaika n. 4-12 viikkoa USA:n varastosta.
Ominaisuudet: Kapasiteetti: 17-Round Malli: 17 Materiaali: Polymer Merkki: Glock Patruuna: 9 mm Luger Viimeistely: Translucent Määrä: 1

Ominaisuudet

Kapasiteetti: 17-Round Malli: 17 Materiaali: Polymer Patruuna: 9 mm Luger Valmistaja: Glock Viimeistely: Translucent Toimituksen paino: 0,045kg Toimituksen korkeus: 32mm Toimituksen leveys: 102mm Toimituksen pituus: 191mm

Tuotekuvaus

USA:n vientiluvan tyyppi: 0A501.d



The Strike Magazine for GLOCK™ G17 (9mm) is a high-strength impact resistant custom blended SI Polymer Extreme double-stack pistol mag that includes a translucent body for quick visibility of ammo and a specially selected spring for added reliability. The capacity of the 17+ round translucent magazine body is designed with strategically placed textured and non-textured surfaces. Textured where it’s needed to reduce the shine of the brass and add positive feel. Non-textured at one side for ultra-clear visibility of round count and what’s going on inside. Not only is the mag body translucent, there are also corner round count cuts to give you alternative angles to see how many you got left for the fight. Magazine release cuts are designed on both sides the SI mag and is compatible with right, left and ambidextrous release setups found on factory GLOCK™ GEN3-GEN5 frames. The Strike Magazine for GLOCK™ G17 has a built-in hook slot specifically for the SI Extended Magazine Plate (EMP) steel locking plate for an added extra security when increasing capacity but the baseplate included also has standout features. Side cuts on the baseplate provides easier gripping. Paintable triangle markers at the top of mag body to help identify the magazine is in the correct direction when reloading. ID markers at the bottom of the baseplate allow you to custom mark your mags and also make sure nobody goes home with your stuff. Along with the side cuts, the baseplate also has an added front lip for an increased footprint to help with the standing of the mag to give it a little balance. The included baseplate is a tool-less disassembly design for quick and easy removal with a simply push using your finger nail. The Strike Magazine for GLOCK™ G17 (9mm) is fully loaded with features as an alternative option that should line the walls of your safe and gun bag. COMPATIBLE: -GEN3-5 GLOCK™ 17,17L,19,26,34 -SI Extended Magazine Plate (EMP) NOTE: Not for sale to California, Colorado, Connecticut, Hawaii, Illinois, Maryland, Massachusetts, New Jersey, New York, Vermont and Washington DC residents due to 10 or 15-round state laws. The checkout process will show NO shipping method available. LENGTH    125.55mm WIDTH    28.5mm HEIGHT    41.88mm Product features: -Capacity: 17+ rounds -Translucent magazine body with strategically placed textured and non-textured surfaces -Textured where it’s needed to reduce shine of brass and added positive feel -Non-textured at one side for ultra-clear visibility of round count -Corner round count cuts provides alternative angles to view ammo count from the side or rear of the magazine body -Increased magazine spring strength for reliability -Ambidextrous mag release cuts -Side cuts on baseplate provides easier gripping -Paintable triangle markers at the top of mag body to help identify the magazine is in the correct direction when reloading -ID markers on bottom of baseplate -Baseplate front lip for increased footprint when standing -Included baseplate is a tool-less disassembly design for quick and easy removal -Built-in hook slot specifically for SI Extended Magazine Plate (EMP) steel locking plate for added security when increasing capacity -High-strength impact resistant custom blended SI Polymer Extreme  
Voi laittaa jälkitilaukseen
37,30 € *
Aiempi hinta 43,90 €
Uutiskirje